Ρυμουλκούμενο χαμηλού φορτίουMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Ρυμουλκούμενο χαμηλού φορτίου
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
32.950 €
(39.210 € μικτό)
Έτος κατασκευής
2024
Κατάσταση
Καινούριο
Τοποθεσία
Egestorf 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Βασικά δεδομένα
- Ονομασία:
- Ρυμουλκούμενο χαμηλού φορτίου
- Κατασκευαστής:
- MÜLLER-MITTELTAL
- Έτος κατασκευής:
- 2024
- Κατάσταση:
- καινούργιο
Τιμή & Τοποθεσία
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
32.950 €
(39.210 € μικτό)
- Τοποθεσία πωλητή:
- Eichenstich 12, 21272 Egestorf, Γερμανία

Κλήση
Τεχνικές λεπτομέρειες
- Μέγιστο βάρος φόρτωσης:
- 14.550 κιλ
- Συνολικό βάρος:
- 19.000 κιλ
- Διάταξη αξόνων:
- 2 άξονες
- Μήκος χώρου φόρτωσης:
- 6.270 χιλ.
- Πλάτος χώρου φόρτωσης:
- 2.470 χιλ.
- Ύψος χώρου φόρτωσης:
- 400 χιλ.
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A128-69-474
- Αριθμός Αναφοράς:
- 5954
- Τελευταία ενημέρωση:
- στις 16.12.2025
Περιγραφή
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (tyre pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* Rear exterior folding supports
* Tool box made of galvanised sheet steel approx. 650 x 350 x 320 mm right-hand side (powder-coated in black)
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
Isdpepk D Ncjfx Ac Heik
* Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm
* 50 mm softwood floor, clamped design
* Fittings in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of plain sheet metal
* Drop-down side walls, trapezoidal profile steel, with sideboard spring lifter
* Steel rear wall, insertable between ramps – storage bracket for non-use inside at the front bulkhead
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t recessed lashing rings every 600 mm
* Each front and rear corner with 1 x 10 t lashing point, various holes for 1.2 t lashing options in front and rear crossmembers
* Single-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, rear folding supports and ramps hot-dip galvanised
* Axles, springs, air tank and landing gear painted in black
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
* Sideboard coating in RAL 9010 pure white
* Alternate RAL sidewall paint finish available at extra cost
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex works Egestorf
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
* Wabco EBS-E (electronic braking system)
* TPMS (tyre pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at the front
* Rear exterior folding supports
* Tool box made of galvanised sheet steel approx. 650 x 350 x 320 mm right-hand side (powder-coated in black)
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
Isdpepk D Ncjfx Ac Heik
* Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm
* 50 mm softwood floor, clamped design
* Fittings in front of the bulkhead for retrofitting container locks
* Bolted bulkhead made of plain sheet metal
* Drop-down side walls, trapezoidal profile steel, with sideboard spring lifter
* Steel rear wall, insertable between ramps – storage bracket for non-use inside at the front bulkhead
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to fit 3 t recessed lashing rings every 600 mm
* Each front and rear corner with 1 x 10 t lashing point, various holes for 1.2 t lashing options in front and rear crossmembers
* Single-piece mechanical grating ramps with spring system for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, rear folding supports and ramps hot-dip galvanised
* Axles, springs, air tank and landing gear painted in black
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
* Sideboard coating in RAL 9010 pure white
* Alternate RAL sidewall paint finish available at extra cost
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex works Egestorf
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένο μέλος από το: 2001
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+49 40 33... αγγελίες
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα














































