Κλειστό ρυμουλκούμενο

Weka WEKA Wechselkoffer, BDF,7.600mm lang,Zurrleisten

Κατάσταση: γενικά ανακατασκευασμένο (μεταχειρισμένο), Λειτουργικότητα: πλήρως λειτουργικό, 7,82 BDF Krone smooth-sided swap body, used (Multiple units available) The exterior of the swap body, including the roof, is painted in the customer's color, common RAL shades. The substructure and parts of the support legs are not painted; this is not visible when the body is set down on the ground. Parking height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. External dimensions (approx. in mm): Length 7820 Width 2550 Height 2925 Internal dimensions (approx. in mm): Length 7700 Width 2480 Height 2700 Door openings (in mm): Width 2370 Height 2600 Lashing: keyhole type For registration/operation: Maximum permissible gross weight: 16,000 kg Suitable for intermodal (KLV) rail freight, including rail coding according to DIN EN 13044 Rail approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high floor group incl. floor; rectangular cross-beams with lateral beams and outer frame as welded construction with an underbody guide tunnel 4 container corner castings to 20' standard, symmetrical overhangs, 4 gripper bar strips 7 pairs of lashing rings on the side in the rubbing strip Floor: Type: BO WST 27 mm thick, waterproof glued phenolic plywood, strength as per DIN EN 283; for floor loads up to a max. of 5,460 kg forklift axle load 2 ventilation openings at the front of the floor (in accordance with GGVS) Box body: Superstructure type AB WST Internal height: 2700 mm Door portal height (clear): 2525 mm Total height: 2925 mm Front wall height: 2900 mm Closed design Side walls are smooth made from galvanized steel sheet cassettes Roof made from trapezoidal profiled steel sheet, construction height: 25 mm 2 ventilation vents per side wall Rubbing strip and side wall with internal cutouts for forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made from galvanized steel sheet cassettes Front wall inside fitted with 21 mm phenolic ply panel, 750 mm high, above that continuous 12 mm phenolic ply panel Front wall outside top offset (optimized for cornering) Rear wall with roller shutter (clear width: 2370 mm), with DB approval Train Plus, rollers replaceable Flat steel impact protection for roller shutter guide rail Side walls fully lined inside with keyhole plates 13 steel guide rails each recessed left and right for double-deck loading bars 13 LM loading bars for double-deck loading Horizontal steel impact protection at the rear profile, left and right Duedpfsvv R Ifex Alnju Note: Actual dimensions and other specific details may vary slightly from the above specifications due to ongoing product improvements.