Ρυμουλκούμενο με εναλλάξιμο αμάξωμα

WECON 4x Duke WPR715 SG RAPIDO Bodenstaufach verzinkt

WECON Curtainsider Sliding Tarp Flatbed BDF Swap Body
Duke Type WPR 715 SG
Hfjdpfsv Rtygsx Ahyjn
Year of Manufacture: 04/2021
German First Ownership!
4 units WPR 715 SG with the following specifications:
WECON Standard Sliding Curtain Swap Body Duke Type WPR 715 SG

External Dimensions
Superstructure length: 7,150 mm
Superstructure width: 2,550 mm

Internal Dimensions
Superstructure length: 7,040 mm
Superstructure width: 2,480 mm

Unladen weight: 2,590 kg
Gross weight: 16,000 kg

Internal height: 2,200 mm with sliding roof included
External height: 2,450 mm (corner height 2,450 mm = C 00)
Clear loading height (side): 2,120 mm
Clear loading height (rear): 2,165 mm

Rear floor storage compartment integrated in the floor frame
--> Center tunnel restricted as a result
Floor frame: Construction made of galvanized high-quality steel, 215 mm frame height
Container corner castings: 4x on 20’ basis, 4 grab edges according to EN 284, wheel clearance 120 mm

Flooring for swap bodies: Multi-layer bonded plywood, approx. 25 mm thick, suitable for forklift trucks, axle load up to 5,460 kg
Fixed landing legs, parking height 1,320 mm, galvanized finish
15 pairs of lashing rings. Distribution: From VK STW to the center, 1st pair of lashing rings approx. 400 mm apart, then even spacing of the remaining rings.
Lashing rings, 1 pair, mounted on the inside of the front wall stanchion at a height of 1,000 mm from upper edge of the floor
One-sided pallet stop edge, 30 mm high on the left in the direction of travel; standard curtain side.
Lashing facilities via elongated holes (approx. 15 x 30 mm), spacing between elongated holes approx. 200 mm.
Clear loading height reduced by 30 mm.

Front wall: Smooth, bolted steel front wall, full height in cassette design (cassettes galvanized)
Anti-slip plywood on the inside of the front wall, 1,500 mm high, 12 mm thick
Front wall equipped internally with impact protection consisting of 300 mm high galvanized steel sheet

Rear portal: Smooth double-winged sandwich door, 4 internal rotating bar locks, 4 hinges per door leaf.

Left side wall: Sliding curtain according to DIN EN 12641-2, quality 890 g/m², webbing grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. Stainless steel buckle with pressure lock.
1 center stanchion, symmetrically arranged → left in direction of travel
Stanchions each with 3 rows of slat pockets and one row of collection pockets (approx. 600 mm high) on the floor
8 aluminium plug-in slats left side, approx. 100 mm high

Wecon RAPIDO RIGHT vertical steel profiles attached to the side curtain and guided in upper and lower runner via rollers.
- Vertical tarp tensioners omitted
- Center stanchions omitted
- Horizontal plug-in slats omitted

Fixed tarpaulin roof, executed as standard sliding roof, lockable only
Roof with parallel runner rails, distance between rails approx. 2,370 mm, distance from lower edge of rail to lower edge of roof bow approx. 90 mm

Coating: Floor frame and landing legs hot-dip galvanized, superstructure components dip-primed and powder-coated in standard RAL color
Roof tarpaulin: RAL 9010 (pure white)
Side curtain: RAL9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)

TÜV Certificate Code XL included
The certificate confirms the load securing effect of the body. Requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and EN 12642 - Code XL are fulfilled.

Accessories: Rear steel bumper corners, access ladder at the rear,
2 door retai

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.