Ημιρυμουλκούμενο ανατρεπόμενο

STAS ferroSTAR 68 cbm

Last Königszapfen National (t) 12
King pin load (national, t): 12

Achslast National (t) 8
Axle load (national, t): 8

Achsabstand (mm) 1310-1310
Axle spacing (mm): 1310-1310

Aufsattelhöhe (mm) 1150
Fifth wheel height (mm): 1150

Chassisbreite (mm) 1400
Chassis width (mm): 1400

Techn. zul. Gesamtgewicht 39=12 9 9 9
Permissible total weight (technical) (t): 39 (distribution: 12/9/9/9)

Innenhöhe vorne (mm) (IHF) 2460
Internal height front (mm) (IHF): 2460

Innenhöhe hinten (mm) (IHB) 2460
Internal height rear (mm) (IHB): 2460

Gesamtbreite (mm) 2550
Total width (mm): 2550

Radstand (mm) 7753
Wheelbase (mm): 7753

Gesamtlänge (mm) 13127.6834
Overall length (mm): 13,127.6834



Chassis
Chassis material: Steel
Tyre size: 385/65R22.5
Axles: SAF Intra
Brake type: SAF - SBS 2220
Option: 1st axle with lift axle and starting aid
Activation of starting aid via button in the truck (button installation not included in standard scope) and by pressing the brake pedal three times
Brake pad wear indicator connected
Air spring protection plate
Tyre pressure monitoring: Wabco Trailerpulse
Air suspension: ECAS with lift and lowering valve
Automatic lowering of air suspension during tipping, can be manually locked via smartboard and toggle switch on chassis
Coupling head: Pneumatic European palm coupling
Rims: Alcoa Dura-Bright
Wheel nut caps: chrome-plated
Landing gear: steel gearbox landing gears mounted at front of chassis, type JOST MODUL, single-sided operation, 2-speed
Underrun protection operation: manual
Mudflap underrun protection: black with STAS logo, fitted across full width of underrun protection
Control console: EBS operation on left in travel direction, in front of axles
Toolbox left, plastic
Lighting type: ECOLED II
Work lights (operation via switch): 2 LED reversing lights rear, left and right in direction of travel, mounted on lamp bracket
Work lights (operation via switch): 2 LED reversing lights front, left and right in direction of travel, mounted in area of landing gears

Make: Tipping cylinder: Hyva
Type tipping cylinder: hydraulic cylinder with small shell
Tipping angle: Normal ±47°
Model tipping cylinder: Hyva - FC 169
Stroke tipping cylinder: 8130
Max. pressure tipping cylinder: 170
Hydraulic coupling: rotary coupling, size 1, female, hose 2,100 mm
Standard: Smartboard
Aluminium access ladder, 2.8 m length, fitted on right in direction of travel
Position broom and shovel holder: on front wall, left in direction of travel
Position broom and shovel holder: 3 each on chassis, left in direction of travel
Loading pressure gauge Ø 100 mm - fitted front on chassis
Retaining device chassis/superstructure: rubber buffers
Air and electrical console: right


Superstructure
Rear wall type: swing doors
A-shield: foldable on the door, right in travel direction
Floor: made from 5 mm HB450
Rubber pads mounted below the floor crossmembers
Front wall: made from 3 mm HB450
Side wall: made from 4/3 mm HB450
Rear wall: made from 3 mm HB450
Hjdpfx Aowlxr Nohysfn
Number of rear door hinges: 3 pairs
Swing door execution: split 1/2 to 1/2, with 1 scrap lock
Order of door opening: right door leaf opens first (manufacturer’s choice)
Door leaf securing when opened via chain
Rear wall seal: with rubber seal at lower section, overlapping 1,000 mm laterally
Additional rear wall lock: pneumatically double-acting
Operation of additional rear wall lock: manual via operation on side at fitting carrier
Tarpaulin winding version: winding tube
Type of roof bows: steel, trapezoidal, folda

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.