Ρυμουλκούμενο χαμηλού φορτίου

HUMBAUR HTD 308525 K 3-Achs Tieflader lange Rampen, Para

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 18.900 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 7.000 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 – 7,000 mm * Pneumatic 4-way locking clamp as well as mechanical plug-in stops at the front in the running tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 repositionable skip holders for lateral centering of the skips, front 4 skip holders plug-in with pivotable stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and frictional securing of skips * 4 cloverleaf-shaped lashing slots on each side, and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: Djdpfx Aaetplv Temjci * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminium access ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Painting: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar and air tanks painted in a black tone * Hot-dip galvanized main frame ----Information: * Permissible gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. calendar week 47/2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 17.650 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.230 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TP 30.0 with 3 cable drum mounts ----Brake System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering device ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation - * 15-pin electrical connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General attachments: * Aluminum air reservoir * Stainless steel toolbox on the side approx. 1,000 x 300 x 600 mm * Side underride protection * Plastic quarter mudguards * Rear underride guard ----Flatbed platform: * Zurr-fix outer frame, angled at 45°, with holes for lashing equipment; lashing capacity per lashing point 2,000 kg at a spacing of 480 mm * Option for installing 3,000 kg drop lashing brackets at intervals of approx. 600 mm – each side is supplied with 12 pieces of 3,000 kg lashing brackets * Each side with 5 pockets for stake posts 100 x 50 mm in the outer frame – stake posts are not included in delivery * 30 mm phenolic plywood floor ----Drum mounts: * 3 units galvanized drum mounts, secured with container locks, with side forklift pockets center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Max. drum weight per cable mount 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft 76 mm diameter with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 pieces 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unspooling ----Loading height: * approx. 1,040 mm when loaded ----Paint/Finish: * Chassis, turntable, drawbar, outer frame, and underride guard hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrade to a technical gross weight of 30 t possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Djdpfsx Nli Nsx Aameci ----Delivery: * Available from calendar week 51 / 2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.940 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.460 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * T3 Profi 30.0 ----Brake system: * EBS braking system * Emergency release device for spring actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical load equalizer at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED rear lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Stainless steel front mudguards (closed design) and straight galvanized steel rear splash guards, both with spray protection * Toolbox made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Hinged cover (hot-dip galvanized) for the toolbox in the bogie platform * Four stake pockets on each side (stakes not included) with simultaneous lashing options ----Load securing (la-si package consists of): * 2 lashing rings (6.4 t) front left & right on the main frame of the bogie platform * 6 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame * Load capacity in the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for 3 m total width (not on the rear slope) * Extension planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for optional retrofitting of hydraulic side shifting ----Loading platform: * Over turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * approx. 5,980 kg unladen weight Dedpfx Asl Th I Ajameci ----Paint finish: * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black ----Information: * Permissible gross weight up to 30,000 kg technically possible * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex works Egestorf