Τρίπλευρο ανατρεπόμενο φορτηγό

MAN TGS 26:480 6x4 EURO5 ATLAS 240.2E-A4 3-S-Kipper

Whatsapp

MAN TGS 26.480 6x4 DF BL SCHWARZMÜLLER 3-way tipper with demountable
ATLAS 240.2E-A4 crane with radio remote control
German vehicle, 1st owner
Equipment/features:
ZF 16-speed manual gearbox with INTARDER

Special features:
- Car phone antenna
- Driver's seat comfort, air-suspended and heated, with lumbar support and adjustable shoulder area
- Flame start system
- Transmission 16-speed - Type: ZF 16S2310
- Fuel tank: aluminium - 400 L diesel
- 60 L AdBlue (urea solution)
- Air compressor 1-cylinder, 360 ccm, with Air Pressure Management (APM)
- Heated air dryer
- Retarder/INTARDER
- Exterior sun visor
- Radio
- Cab sockets 12V and 24V
- Axle configuration: 6x4
- Approach/Front view mirror
- Trailer socket 24V / 7-pin
- Trailer socket ABS
- Anti-slip regulation (ASR)
Dodpjwtkipofx Adqokr
- Audio system: MAN Media Truck Advanced 12V radio with navigation prep
- Exterior mirrors electrically adjustable and heated, wide-angle mirror heated
- On-board computer MAN-Tronic
- Kerbside mirror right
- Rear axle differential lock
- Electronic braking system MAN-Brakematic
- EURO 6 engine
- Suspension: leaf / air
- Electric window lifters
- Tinted windscreen
- Generator 28 V 80 A
- Air conditioning (climate control)
- Multifunction steering wheel
- Raised air intake
- Engine 12.4 L - 353 kW diesel
- Engine compartment encapsulation
- Rear side windows tinted
- Upholstery: comfort quality
- Sunblind (side window & driver’s door)
- Rear axle stabilizer
- Front axle stabilizer
- Viscous fan
- Rotating warning beacons
- PTO NH/1C
- Intarder
- Additional steps for construction vehicles
- Rear axle differential lock
- Electronic braking system MAN-Brakematic
- Cab type: M (medium length)

ATLAS CRANE type 240.2E-A4
1.93m = 11.20 t
4.51m = 4.78 t
6.41m = 3.22 t
8.31m = 2.40 t
10.31m = 1.88 t
12.31m = 1.56 t
14.30m = 1.26 t
Radio remote control
Demounting console Palfinger
High seat with mount for radio control

SCHWARZMÜLLER 3-way tipper body
Dimensions:
- Internal length approx. 6,300 mm
- Internal width approx. 2,420 mm
- Total width 2,550 mm

Subframe:
- Continuous longitudinal beams with cylinder mounting and tipping arms
- Low build height approx. 440 mm
- Plug locking for tipper body with cross protection
- Body support and sound insulation
- Reinforced subframe and end plate for Atlas 240.2E A4 crane, removable tail section,
- Welding on both supplied attachment plates for removable tail, without crane body
- High-pressure hydraulic tipping system
- 20-t tipping cylinder for 3-way tipping,
with safety cable,
Tipping angle to rear approx. 40 degrees
- Installation of load-sensing pump
- Installation of oil tanks (from crane supplier)
- Pneumatic tipping valve with overpressure valve
- Pneumatic 3-way changeover valve for tipper crane
- 2-pipe trailer tipping coupling with pneumatic 3-way changeover valve, incl. DN16 fittings

Tipping platform:
- Welded all-steel construction with 5 mm fine-grain stainless steel floor plate
- 10 pairs of rotating lashing rings distributed: first pair approx. 400 mm from bulkhead,
- Distance between lashing rings approx. 600 mm (width between rings 2,320 mm)
- Lashing rods with straps stored on both sides under tipping body
- Fixed front wall made of 4 mm steel plate, approx. 980 mm high
- Removable cab protection grille with lashing eyes
- 2 entrance steps on the outer front wall (left) – access to cab
- 2 entrance steps on inner front wall (left)
- Continuous, one-piece side walls made of reinforced aluminium hollow profile

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.