Τεχνολογία πολτού

Wienhoff 21.000 T PTW PROFI LINE

21,000 T PTW PROFI LINE
(0010) Wienhoff Slurry Tanker 21,000 T PTW Profi Line
(0020) Slurry Tanker Type 20,800 _TW Profi Line, spec. FV
(0021)
(0022) Please direct inquiries exclusively
(0023) to the following contact information!!
(0024) Jan Lohoff Tel.
(0025) The employees listed here from
(0026) AGRAVIS Technik Center
(0027) are set automatically and
(0028) cannot provide you with any information.
(0029)
(0030) Slurry tanker with internal coating and external finish.
(0040) 7.10 m cylinder,
(0050) 6 mm wall thickness, 1.90 m tank diameter, 3 welded
(0060) "baffle plates"
(0070) inside the tank and manhole cover parallel to the rear lid.
(0080) Tank with fluid displacement for
(0090) drawbar load optimisation.
(0100) Tank in classic Fendt green, 32" wheels, outer surfaces in red,
(0110) axles, drawbar, and small components in black.
(0120) Safety valve
(0130) Simple tank venting and bleeding (through the tank)
(0140) (Important: with hose routed downward)
(0150) Second tank vent and bleed at the rear for FV (only on
(0160) Can-Bus)
(0170) (Important: with hose routed downward)
(0180) Float-type level indicator, 220 mm float at the front
(0190) in the tank for Can-Bus
Hnsdpfx Adewwnd Eoajw
(0200) 8" suction connection with 8" manual slide valve and quick coupling
(0210) (front left for suction)
(0220) 6" suction connection with 6" manual slide valve and quick coupling
(0230) (front right for suction and rear
(0240) left directly on the tank for discharge)
(0250) 8" hydraulic slide valve
(0260) (between the suction valves and
(0270) the stone trap, this valve
(0280) is coupled with automatic switching)
(0290) 14-ton Gigant air suspension, forced-steering by cable, tandem
(0300) with 140 mm FAD axles, track width 2225 mm, RDR prepped
(0310) Low centre of gravity: axles above springs (one mudguard per axle)
(0320)
(0330) Wheels: 30.5 LR 32 BKT Roadmax FL 690
(0340) Wheels: 650/65 R 30.5 Vredestein Flotation Trac
(0350) for maize tires, with RDA connection
(0360) (these wheels to be fitted before delivery)
(0370) Hydro-pneumatic suspended lower linkage 1900, K80 with
(0380) hydraulic support leg
(0390) Ball hitch upper edge: 700 mm
(0400) Preparation for top cylinder system
(0410) Flat steel on the drawbar
(0420) Dual-circuit air brakes with ALB
(0430) 40 km/h equipment with galvanized mudguards:
(0440) Galvanized mudguards with round steel edging,
(0450) Warning boards + marker lights
(0460) Underride protection with truck lighting
(0470) 40 km/h TÜV certificate
(0480) Surcharge: LED lighting on underride protection
(0490) Outline marker lights on underride protection for better
(0500) perception of vehicle dimensions
(0510) LED
(0520) Active marker lights instead of cat's eyes on
(0530) the vehicle flanks
(0540) LED
(0550) LED working lights, 2 pieces, position:
(0560) left and right on the tank
(0570) 2x as reversing lights on underride protection
(0580) Prepared for camera/beacon
(0590) Rear tank mount: steel tube for cable routing
(0610) Vogelsang RotoCut M 10,000 cutting device
(0620) mounted on a large stone trap.
(0630) Vogelsang rotary lobe pump VX 186/390Q - 9,000 L/min
(0640) Injection system with reduction gear
(0650) incl. hydraulic gearbox switch
(0660) PTO shaft Bondioli Pavesi size 9 with 10 mm
(0670) shear bolt and wide angle for large pumps
(0680) Overpressure ve...

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.