Τεχνολογία πολτού

Joskin VOLUMETRA 18000 D

VOLUMETRA 18000 D
Joskin slurry tanker
With vacuum pump
Force-steered axle - incl. tow eye,
Central adjustment station with: 2 nitrogen balls, hand pump with
oil reservoir and pressure gauge replacing
rear trailing axle
Axle distance 1,820 mm instead of 1,550 mm
with hydro-tandem or hydro-tridem
(NOT PERMITTED with rigid axles) – REQUIRED
for wheels Ø 1,601 to 1,675 mm
Load-dependent air brakes for vehicles
with hydraulic axle suspension (air brakes required)
2 rear LED work lights (with
cab control panel)
Marker lights and side
LED lighting
Rear underrun protection
Pump type PNR 155 JUROP (15,200 l/min
at atmospheric pressure – 13,217 l/min at 60% vacuum)
Direct drive 1,000 rpm – automatic lubrication,
60 l siphon trap, rubber hose Ø 100 mm,
JOSKIN safety overpressure valve Ø 150 mm
and air injection cooling
instead of MEC 8000
ECOPUMP: Silencer with large-volume
oil separator and increased air intake –
noise reduction included
Single wide-angle PTO shaft
(Walterscheid)
Fill level indicator Ø 6" (150 mm
(Plexiglas sight tube) instead of
standard sight glass
Intake slide valve Ø 6" (150 mm) with
guide rail, Perrot type
Turbo-filler Ø 8" (200 mm) high flow rate
(Hydraulics: 50 l/min at 180 bar) with pressure gauge Ø 60 mm
(Intake slide valve required)
Prepared for FrontJUMBO without mounting
Ø 200 mm or for side JUMBO
suction arm
Ball-type coupling Ø 50 mm for steering drawbar
Electrohydraulic operation with
low flow rate – everything except
hydraulic motor (distributor, turbo and
chopper) (Input block required)
– per function
Flow diversion for turbo, agitator
or central tire inflation system (high flow with PVG) – (functions
with low flow not available when using this function)
(NOTE: can only be ordered once)
TÜV type approval for 40 km/h (without
rear underrun protection)
Tyres 750/60R30.5 FL 630 SUPER (BKT) 181 D (Ø 1,675 x 754 mm, 11,220 kg per tyre
Gsdpfexntdiex Ahyouh
at 40 km/h and 4 bar) instead of 400R22.5
Mini wheel arch installation (available only on VOLUMETRA and EUROLINER)
SOLODISC pre-equipment for COBRA2,
TETRAX, QUADRA, EUROLINER and VOLUMETRA
– including AUTOMATE kit 2+3
instead of rear slide valve and standard
distributor
AUTOMATE 2+4 instead of AUTOMATE 2+3
(required on SOLODISC with
hydraulic compensation)

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.