Ανατρεπόμενο ρυμουλκούμενο

Oehler OL ZDK/HW 180

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 2024, Εξοπλισμός: πνευματικό φρένο, OL ZDK/HW 180 Oehler OL ZDK/HW 180 Tandem Axle Three-Way Tipper - 18 t permissible gross weight / air brakes Technical data: Cargo bed internal dimensions: 5,000 x 2,420 x 800 x 800 mm, pallet size Overall width 800 + 800 mm Floor plate: 5 mm, continuous, un-welded Maximum axle load capacity: 14,500 kg each Tipping cylinder stages: 5 1,875 mm 75-90-105-120-140 max. operating pressure: 180 bar Required oil volume: 18.6 l Standard basic equipment: Chassis: closed C-frame, torsion-resistant (truck standard) Side walls: reinforced, continuous steel side walls, left side in direction of travel hydraulic side wall, right side + rear (individually swinging) Platform: central locking on 3 sides, bolted corner stanchions Sealing: rubber seal in vertical area for hydraulic wall Axles: BPW 400x120, square, suitable for 25/40 km/h Connections: 2nd oil and air connections run to rear with three-way valve for second trailer Electrics: 12-volt lighting system, rear socket Primer coating + powder coating Tipping mechanism: 5-stage lifting cylinder, 1,875 mm stroke, hard-chromed piston rod, universal mounting, automatic stroke limitation Miscellaneous: wheel chocks - Approval documents for 40 km/h* (mudguards required) - Automatic tow coupling Rockinger 260 G 140 - Roll-up tarpaulin with accessories and walkway - Mudguards - Tyres: 560/45R22.5 152D TL FL 630 ULTRA, 10 bolt, ET+50 - Special paintwork: body black (RAL 9005) STT 130 2,550 mm ALB: on both axles Overall length: 7,170 mm Standard side panels Grain chute Iedsxpkznjpfx Ahyobc Paintwork: ACC Platform height: 1,420 mm Track width approx.: 2,050 mm Cylinder stage Ø mm: Cylinder stroke length: Max. lifting force: 27.7 t

Κατάσταση: καινούργιο, Έτος κατασκευής: 2024, Εξοπλισμός: πνευματικό φρένο, OL ZDK/HW 180 Oehler OL ZDK/HW 180 Two-Axle Three-Sided Tipper - 18 t permissible total weight - Air brake system Technical specifications: Body internal dimensions: 5,000 x 2,420 x 800 x 800 mm, pallet-sized Total width: 800 + 800 mm Floor plate: 5 mm, continuous, unwelded Max. axle load capacity: 14,500 kg per axle Tipping cylinder stages: 5 Lift: 1,875 mm Cylinder diameters: 75-90-105-120-140 mm Max. operating pressure: 180 bar Required oil volume: 18.6 l Standard features: Chassis: Closed C-frame, torsion-resistant (truck-standard) Side walls: Reinforced continuous steel side walls, hydraulic side wall on left side (in direction of travel), hydraulic side wall on right side + rear (separately swiveling) Body: Central locking on 3 sides, bolted corner stanchions Sealing: Rubber seal in vertical area for hydraulic wall Axles: BPW 400x120, square, suitable for 25/40 km/h Connections: 2nd oil and air brake connection extended to the rear with three-way valve for a second trailer Electrics: 12 V lighting system, rear socket Coating: dip-primed and powder-coated Tipping system: 5-stage telescopic cylinder, 1,875 mm stroke, hard chromium-plated piston rod, cardanic mounting, automatic stroke limit Other equipment: wheel chocks - Registration documents for 40 km/h* (mudguards required) - Automatic towing hitch Rockinger 260 G 140 - Mudguards - Special paint for tipper body in black (RAL 9005) STT 130 - Roll-up tarpaulin with accessories and catwalk - Tyres: 560/45R22.5 152D TL FL 630 ULTRA, 10-hole, offset +50 Also available as part of a tractor-trailer combination. Additional specifications: Max. working pressure: 180 bar Overall width: 2,550 mm ALB (automatic load-dependent brake): on both axles Overall length: 7,170 mm Standard sideboards Grain chute Ibjdpfxov D R E Hj Ahyoc Paint: ACC Platform height: 1,420 mm Track width approx.: 2,050 mm