Ημιρυμουλκούμενο με πλατφόρμα εργασίας

SCHWARZMÜLLER 3-A Plateau BPW Lift Steckrungen Hartholz PalKis

SCHWARZMÜLLER 3-Axle Construction Material Flatbed Semi-Trailer RH125
REINFORCED CHASSIS 20t/4m!!!
FIRST REGISTRATION !!
German trailer, 1 owner, TOP CONDITION
Internal length approx. 13,620 mm
Internal width approx. 2,480 mm
Loading height front approx. 1,240 mm
Loading height rear approx. 1,210 mm
Welded steel frame construction
Reinforced to withstand 20 t at the focal point over 4 m loading length
Frame height at the front approx. 140 mm
Longitudinal beams reinforced with underframe profile at the cranked area
(can be uncoupled for loading)
Coupling height 1,090–1,190 mm
Reinforced 5 mm perforated outer frame with 100 mm hole spacing, oblong holes 40/25 mm and additionally 12 pairs of 4 t lashing rings recessed into the outer frame profile
SCHWARZMÜLLER stake load securing system "RuLasi"
6 removable cross members for box section stakes 80 x 80 mm, spanning full width (except at longitudinal beams) at central cross members for strap hooks;
Offset from front wall: 500/2550/4430/7200/9830/12870 mm
Holder for box section stakes 80 x 80 mm, directly inside front wall, full width (except at longitudinal beams), hot-dip galvanized, for 15 stakes
6 steel box-section limit stakes 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes for tie-down straps, galvanized, with spring-loaded securing
6 steel box-section limit stakes 80x80x5 mm, usable height approx. 1,000 mm, with lashing holes for tie-down straps, galvanized, with spring-loaded securing
Mechanical steel landing gears, 2 x 12 t with push-pull compensation
BPW EcoDisc axles with disc brakes ø430 mm (22.5" disc),
Axle load capacity 9 t/axle, on-road design
Axle spacing 1,310 + 1,310 mm
Wheelbase 7,620 mm
Axle lift on 1st axle, automatic weight-dependent lifting/lowering
6x tyres 385/65 R 22.5, 160K, MICHELIN X Multi T
Steel rims 11.75 x 22.5, offset 120 mm, silver
Plastic wheel nut covers
Brake system compliant with EC Directive 71/320 ECE R13
Dual-circuit air brake system
Wabco brake system
EBS system 2S2M, one axle monitored
RSS - Stability Program
Steel air tanks
Brake/air connections with 2 single coupling heads (yellow/red)
Air suspension with raise/lower function, total stroke approx. 200 mm
Automatic ride height adjustment to pre-set level from 15 km/h
Axle load display via EBS CAN bus signal for driver's cab display
Larch wood floor, 40 mm, longitudinally laid, impregnated on both sides, with steel hat profile runners over the longitudinal beams and phenolic resin underlay, floor load capacity 7,000 kg fork axle load
Aluminium hollow profile front wall approx. 2,400 mm high
Front wall inside fitted with 2 lashing rings for securing loads
Front wall reinforced with 4 middle supports up to top
Front wall protection inside 9 mm phenolic plywood
Holder for squared timber (2 L-brackets for stacking 10 x 100x100 mm beams, 2,300 mm wide)
Steel front corner pillars, bolted
24-volt lighting system in accordance with EC Directive 76/756/EEC
Partially LED five-chamber tail lights "Europoint III"
8x LED side marker lights
2 additional LED reversing lights
Steel grit cleaning, 2-layer zinc phosphate primer,
Chassis = RAL 7021 Black Grey
Outer frame + end plates = RAL 7021 Black Grey
Corner posts + front wall + pallet box lids = RAL 9010 Pure White
Contour marking stripes in accordance with ECE 48
Plastic individual wheel fenders with splash guards
Access ladder rear right
Delta rubber impact buffer +
Lodsxquqpepfx Aggjru

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.