Ανοιχτό ημιρυμουλκούμενο με μουσαμά

KÖGEL S24-1*Volumen-Pritschensattelanhänger*10x vorhan

VIN: WK0S0002400300637

Permissible fifth wheel load: 12,000 kg
Permissible axle group load: 24,000 kg (8,000 kg per axle)
Technically possible axle group load: approx. 27,000 kg (9,000 kg per axle)
Gross permissible weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading platform length i.L.: approx. 13,620 mm
(G) Loading platform width i.L.: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Loading height unladen, driving level horizontal: approx. 1,030 mm
(H2) Loading height laden, driving level horizontal: approx. 1,000 mm
(H3) Ramp height achievable at rear with fifth wheel height 910 mm, laden and raised: approx. 1,190 mm
Driving height set to 265 mm.
(K) Side through-loading height i.L.: front approx. 2,735 mm - approx. 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810-2,860 mm [adjustable by 1x50 mm]
(K1) Interior height under roof i.L.: front approx. 2,875 mm - approx. 3,000 mm [adjustable by 5x25 mm], rear approx. 2,950 mm - approx. 3,000 mm [adjustable by 1x50 mm]
(X1) Total height unladen, driving level horizontal: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- height adjustment
Body settings: The design of the "Mega" body allows height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant dimensions (total height, side through-loading height, interior height) vary according to the selected body setting.
(T) Roof construction height, side: approx. 180 mm. Due to the design of the roof rail, the pallet-width interior height i.L. corresponds to the specified interior height under the roof i.L.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance radius (according to ISO 1726): approx. 2,300 mm
(P) Build height above fifth wheel: approx. 90 mm
(S) Fifth wheel coupling height unladen possible: approx. 940 - 1,070 mm, level at approx. 940 mm (observe total height!)
Frame
Conventional ladder frame in lightweight steel design with push-through crossmembers.
Protective cover plate between the outer frame and longitudinal members as splash guard for the rear wheels of the tractor unit.
Coupling plate 8 mm thick, with 2" kingpin according to DIN 74080 / ISO 337
Chassis
Axle lift mechanism on axle 1
Fully automatic, load-dependent axle lift control. Start-up aid: activated by 3x brake, 30% overload up to 25 km/h.
Kdodpfxexxxr Hs Aatsw
Three-axle group SAF INTRADISC, with disc brakes Ø 370 mm, ET 120.
Air suspension with 260 mm travel
Chassis attachments
JOST landing legs, mechanical with compensating foot, 24 t lifting capacity. Single-sided operation facing right.
Side underrun protection according to ECE-R73
2 large, waterproof plastic toolboxes, dimensions (internal) approx. 923 x 422 x 460 mm. Installed at rear, 1x left and 1x right.
Rear access ladder on right, extendable.
Low, rigid rear underrun guard made of steel according to ECE-R58
Height of underrun guard profile min. 120 mm, designed for increased test forces.
Brake/Air Suspension System
WABCO EBS system
Air suspension system incl. 1 raise/lower valve, mounted on the left side behind the axle group. Driving level is adjuste

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.