Τριπλής κατεύθυνσης ανατρεπόμενο ρυμουλκούμενοMÜLLER-MITTELTAL
18 to, Luft, Seitliche ALU Wände, Rollplane
Τριπλής κατεύθυνσης ανατρεπόμενο ρυμουλκούμενο
MÜLLER-MITTELTAL
18 to, Luft, Seitliche ALU Wände, Rollplane
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
33.750 €
(40.162 € μικτό)
Έτος κατασκευής
2026
Κατάσταση
Καινούριο
Τοποθεσία
Egestorf 

Προβολή φωτογραφιών
Εμφάνιση χάρτη
Βασικά δεδομένα
Τιμή & Τοποθεσία
σταθερή τιμή δεν συμπεριλαμβάνεται ΦΠΑ
33.750 €
(40.162 € μικτό)
- Τοποθεσία πωλητή:
- Eichenstich 12, 21272 Egestorf, Γερμανία

Κλήση
Τεχνικές λεπτομέρειες
- Μέγιστο βάρος φόρτωσης:
- 13.830 κιλ
- Συνολικό βάρος:
- 18.000 κιλ
- Διάταξη αξόνων:
- 2 άξονες
- Μήκος χώρου φόρτωσης:
- 4.995 χιλ.
- Πλάτος χώρου φόρτωσης:
- 2.380 χιλ.
- Ύψος χώρου φόρτωσης:
- 900 χιλ.
Λεπτομέρειες προσφοράς
- ID Καταχώρησης:
- A207-87-252
- Αριθμός Αναφοράς:
- 6317
- Τελευταία ενημέρωση:
- στις 18.12.2025
Περιγραφή
KA-TA-R 18
---- Brakes:
* EBS-E (electronic braking system with RSS)
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
---- Axles:
* 2 x 9 t Gigant axles
---- Suspension:
* Air suspension with level control during tipping operations
---- Electrics / Lighting:
* Tire pressure monitoring system with display option in truck dashboard via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting with galvanized protective cover
---- Drawbar Eye / Drawbar:
* Drawbar with 50 mm flanged coupling eye (adjustable by +77 mm and -33 mm via offset plate)
---- General Attachments:
* Support winch at the front
* Foldable, galvanized steel underrun protection for paver feeding
* Closed single-piece plastic mudguards
* Front wall platform made from grating with access step on drawbar and grab handles on front wall
---- Chassis:
Ibjdpfx Acox Ipbye Hjf
* Fine-grained steel chassis
---- Tipping Body:
* 3-way steel tipper body with asymmetric continuous aluminum side walls – without central stanchion – pivot-mounted via manual central locking; left side wall foldable with board wall spring assist
* Rear wall – made of HBW 400 steel – pendulum mounted with automatic dual claw lock
* 5 mm steel floor made of HBW 450 steel
---- Load Securing:
* Each side: 4 x 3 t recessed, foldable lashing rings integrated into the steel floor
---- Rolling Tarp:
* Rolling tarp – agate grey, similar to RAL 7038
* Tarp tensioned by ratchet straps (on sides) and tensioning rubbers (front and rear)
---- Paintwork:
* Chassis, underrun protection and drawbar hot-dip galvanized
* Axles, air tanks, support winch, flanged drawbar eye painted in a shade of black
* Body painted in RAL 9010 pure white
---- Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale reserved
* Sample images (actual vehicle images may differ due to special equipment)
---- Delivery Time:
* Vehicle available from calendar week 16/2026
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
---- Brakes:
* EBS-E (electronic braking system with RSS)
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
---- Axles:
* 2 x 9 t Gigant axles
---- Suspension:
* Air suspension with level control during tipping operations
---- Electrics / Lighting:
* Tire pressure monitoring system with display option in truck dashboard via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting with galvanized protective cover
---- Drawbar Eye / Drawbar:
* Drawbar with 50 mm flanged coupling eye (adjustable by +77 mm and -33 mm via offset plate)
---- General Attachments:
* Support winch at the front
* Foldable, galvanized steel underrun protection for paver feeding
* Closed single-piece plastic mudguards
* Front wall platform made from grating with access step on drawbar and grab handles on front wall
---- Chassis:
Ibjdpfx Acox Ipbye Hjf
* Fine-grained steel chassis
---- Tipping Body:
* 3-way steel tipper body with asymmetric continuous aluminum side walls – without central stanchion – pivot-mounted via manual central locking; left side wall foldable with board wall spring assist
* Rear wall – made of HBW 400 steel – pendulum mounted with automatic dual claw lock
* 5 mm steel floor made of HBW 450 steel
---- Load Securing:
* Each side: 4 x 3 t recessed, foldable lashing rings integrated into the steel floor
---- Rolling Tarp:
* Rolling tarp – agate grey, similar to RAL 7038
* Tarp tensioned by ratchet straps (on sides) and tensioning rubbers (front and rear)
---- Paintwork:
* Chassis, underrun protection and drawbar hot-dip galvanized
* Axles, air tanks, support winch, flanged drawbar eye painted in a shade of black
* Body painted in RAL 9010 pure white
---- Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 t
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale reserved
* Sample images (actual vehicle images may differ due to special equipment)
---- Delivery Time:
* Vehicle available from calendar week 16/2026
Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένο μέλος από το: 2001
Υποβολή αιτήματος
Τηλέφωνο & Φαξ
+49 40 33... αγγελίες
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα
































