Ρυμουλκούμενο

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 18.000 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.230 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering mechanism ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in truck dashboard via EBS signal – no installation on the truck required * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General Attachments: * Aluminium air tank * Stainless steel toolbox on the side approx. 1,000 x 300 x 600 mm * Side underride protection * Plastic quarter mudguards Lsdpfex Nli Nsx Acujak * Rear underride protection ----Platform: * Zurr-Fix external frame angled at 45° with perforation for lashing points, lashing capacity per point 2,000 kg at 480 mm spacing * Option to fit 3,000 kg drop lashing rings at approx. 600 mm intervals – supplied with 12 pcs. 3,000 kg lashing rings per side * 5 sockets per side for 100 x 50 mm stanchions in the outer frame – stanchions not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports secured via container locks with lateral forklift pockets centre/centre 800 mm apart (pocket width 185 mm) * Maximum drum diameter 2,600 mm and drum width 1,650 mm * Clear width between supporting arms approx. 1,775 mm, with cross brace * Maximum drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with locking mechanism for securing drum shaft * Steel drum shaft, 76 mm diameter, with centring and rotating ends * 2 set collars * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, bogie, drawbar, external frame, underrun protection hot-dip galvanized * Axles finished in black paint ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 18.000 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.230 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck display via EBS signal – no truck-side installation required * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) Lajdpfx Acjx Nlkaeujk * LED lighting ----General attachments: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled with hole pattern for lashing equipment; lashing capacity per point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg folding lashing brackets possible at approx. 600 mm intervals – 12 pcs. 3,000 kg lashing brackets supplied per side * 5 pockets per side for stanchions 100 x 50 mm integrated into outer frame (stanchions not included) * 30 mm phenolic plywood floor ----Drum supports: * 3 galvanized drum supports, secured via container lockings, with forklift pockets on the sides; centre-to-centre 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per drum support 6,000 kg * No drive or drum brake * Support arm with clamp lock for drum shaft securing * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 thrust rings * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unspooling ----Loading height: * Approx. 1,040 mm loaded ----Coating: * Chassis, turntable, drawbar, outer frame, rear underrun protection are hot-dip galvanized * Axles painted in a dark tone ----Additional info: * Technically upgradable to 30 t gross weight * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex-works Egestorf