Μίνι εκσκαφέας

KUBOTA Kompaktbagger KX037-4 MS03 3.+4. Steuerkreis

SN: 209

Kubota Compact Excavator KX037-4 with MS03 Quick Coupler
3rd and 4th hydraulic circuit AUX1/AUX2 operated proportionally
Load hook on MS03 quick coupler, factory-fitted
Dipper arm: 1,525 mm

Accessories:
1x Trenching bucket,
Width: 400 mm,
Mounting: MS03 Symlock,
Bucket transport hook,
Full cutting edge,

Kubota Crawler Excavator KX037-4 MS03:

Machine weight: approx. 3,695 kg

3rd and 4th hydraulic circuit AUX1/AUX2 operated proportionally
Load-holding valve for lift cylinder
Load-holding valve for dipper cylinder
Load hook on MS03 quick coupler, factory-fitted
Changeover valve for pressure-free return for hydraulic breaker
Main battery isolation switch
Dipper arm: 1,525 mm
3-cylinder KUBOTA engine
Rubber tracks
Dozer blade
Radio pre-installation
Sliding front windshield
Mechanically sprung driver's seat
Dumping height: approx. 3,545 mm
Digging depth: approx. 3,410 mm
2x halogen work lights on the cab roof
1x halogen work light on boom

Standard equipment:

Engine/Fuel system:
Original KUBOTA engine
Dual air filter element
Acoustic refuelling system
Battery disconnect switch
Water separator with drain valve
Auto idle feature

Undercarriage:
Short-pitch rubber tracks, 300 mm
2 travel speeds (fast/slow)
Automatic load-dependent travel speed shift
4 externally guided lower track rollers per side
1 upper track roller

Hydraulic system:
2x variable axial piston pumps and 1x gear pump
Emergency lowering via accumulator
Hydraulic diagnostic connections
Straight-ahead travel function
Auxiliary circuits routed to dipper end
Auxiliary circuit (AUX1) with adjustable max. hydraulic oil flow
Auxiliary circuit AUX1 proportional via right joystick / AUX2 proportional via left joystick (standard for Germany and Austria)
Direct tank return line for AUX1

Safety system:
Engine safety start function on the left control console
Hydraulic lockout system
Swing brake system
Travel motors with brake system
Original Kubota anti-theft system
Safety/pipe rupture valves for dipper and boom (ISO8643)

Working equipment:
1,525 mm dipper arm
One work light on the boom

Gedpjx Tli Dofx Agkebg
Cab:
ROPS (Roll-Over Protective Structure, ISO 3471)
OPG (Operator Protective Guard, Top Guard Level I, ISO 10262)
Cab heating with front window defrosting and dehumidification
Fully suspended driver's seat with weight adjustment (fabric seat)
Retractable seatbelt
2 work lights on the cab
Radio installation kit (2 speakers, antenna, radio compartment)
Hydraulic pilot controls with wrist rests
Display unit with diagnostics
Front window opening system with gas strut support
Mounting points for front window guard
Switch and wiring harness for rotating beacon
12 V power supply
Emergency hammer for emergency exit

Technical data - dimensions with cab:
Overall width: approx. 1,550 mm
Overall height (cab): approx. 2,470 mm
Overall length: approx. 4,900 mm
Ground clearance: approx. 285 mm
Dozer blade width x height: approx. 1,550 x 340 mm
Rubber track width: approx. 300 mm
Minimum front swing radius without boom offset: approx. 2,100 mm
Minimum front swing radius with boom offset left: approx. 1,730 mm
Boom swing angle (left/right): 69 / 49 °

Technical data - with cab:
Machine weight with cab: approx. 3,695 kg
Operating weight with cab: approx. 3,770 kg
Bucket ca...

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.