Τεχνολογία πολτού

Wienhoff 20.300 TW PROFI LINE

20.300 TW PROFI LINE
(0010) Wienhoff 20.300 TW PROFI LINE
(0011) Manufacturer serial no.: 2497
(0020) Slurry tanker with internal coating and
(0030) external paint finish.
(0040) 6.20 m cylinder,
(0050) 6 mm wall thickness, 2.00 m tank diameter, 3
(0060) welded anti-surge baffles inside the tank and
Nedpfx Aeyhr Nxegdecp
(0070) manhole cover parallel to rear
(0080) lid.
(0090) Tank with liquid displacement
(0100) for drawbar load optimisation.
(0110) Colour: RAL 6002 (Leaf Green).
(0120) Simple tank venting and aeration with
(0130) galvanised pipe running through the tank.
(0140) E-hydraulics – Second tank venting and
(0150) aeration at the rear for FV.
(0160) Level indicator with 150 mm sight glass
(0170) at the front of the tank.
(0180) Float gauge (diameter ___ mm) at the front of the tank for CAN-Bus.
(0200) 8" suction port reduced to 6" with hydr.
(0210) gate valve and quick coupler.
(0) Quick coupler with ball valve at the front left.
(0230) 6" mech. slide valve with quick coupler
(0240) (direct tank connection for suction).
(0250) 14 t Gigant air suspension, tandem axle,
(0260) forced steering via cable, 150 BPW axles,
(0270) track width 2225 mm.
(0280) Low centre of gravity: axles positioned above
(0290) the springs, wheel housings above both axles.
(0300) Wienhoff 'L&S' Safety Plus for
(0310) Tandem:
(0320) - automatic adjustment of air suspension pressure
(0330) to load distribution
(0340) - Stability Program (RSP)
(0350) - ABS system
(0360) - Drawbar load sensor
(0370) Tyres: 800/60 R 32 Vredestein Fl. Trac
(0380) Hydro-pneumatically suspended lower linkage
(0390) K80 with hydraulic support leg K80 with large
(0400) flange (4t).
(0410) Twin-circuit air brake system with ALB
(0420) 40 km/h equipment with galvanised mudguards:
(0430) Galvanised mudguards with round steel edge,
(0440) warning signs + marker lights
(0450) Underrun protection with truck lighting
(0460) 40 km/h TÜV approval
(0470) Additional lighting on top of the tank, LED
(0480) version.
(0490) 2 LED work lights,
(0500) Positions:
(0510) 2x left/right
(0520) 2x rear
(0530) 1x on suction arm
(0540) Active marker lights instead of
(0550) reflectors on vehicle side in LED.
(0560) Large stone trap box with door opening
(0570) and prepared for RotaCut M
(0580) 10 Vogelsang rotary lobe pump VX 186/390Q –
l/min
(0610) Injection system with hydrostat
(0620) hydraulically regulated rotary lobe pump via
rpm.
(0640) PTO shaft,
(0650) - gearbox
(0660) - hydrostatic pump
(0670) - regulated oil cooler & oil tank
(0680) Drain valves on the pump’s suction and
(0690) pressure side.
(0700) Wienhoff filling turbine 8 inch Type 30
(0710) for docking arm.
(0720) With valve for the E-hydraulics.
(0730) Monitoring unit pressure side
(0740) Pressure gauge on pressure side with
(0750) diaphragm gauge
(0760) Monitoring unit suction side
(0770) Vacuum gauge on suction side
(0780) with diaphragm gauge.
(0790) With 8" inspection flap.
(0800) 2" pressure relief valve at the vacuum gauge.
(0820) PRESSURE FILTER IN FRONT OF THE CONTROL BLOCK!
(0830) WieTaCon 14-1 / PTW basic function.
(0840) Aux variant 6 / suction / docking arm
(0850) all / boom / spreading / headland / 2 axle joystick.
(0870) Additional control box for intake valve
(0880) bottom left and right.
(0890) Additional control box for linkage up/down
(0900) rear left.
(0920) Prepared for Wienhoff N sensor
(0930) Hydraulic pipes instead of hoses to the rear, coupling holders
(0950) at rear sides.
(0960) Pressure line on top...

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.