Ρυμουλκούμενο μεταφοράς αλόγων

MENKE-JANZEN Menke 4,50 m 3,5 to Vollalu " Neu" Viehanhänger

WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles

Expertise and Service from a Single Source

WS Trucks GmbH is your reliable partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer you a comprehensive range of both used and new trucks, livestock transporters, refrigerated vehicles, trailers, and semi-trailers.

Weights & Dimensions
* Permissible total weight: 3,500 kg
* Drawbar load: 100 kg

Body dimensions (internal):
* Length: approx. 4,500 mm
* Width: approx. 1,950 mm
* Height: approx. 2,000 mm

Chassis & Running Gear
* Welded chassis frame made from aluminum profiles
* Rubber-sprung axle assembly
* Axle load: 2,500 kg per axle
* Axle spacing: 800 mm
* Wheels: 215 R14 C 10.5J PR, 5-bolt
* 4-wheel overrun brake with automatic reverse function
* Lighting system in accordance with StVZO

Towing Device & Support
* V-drawbar with overrun device for ball-type coupling
Gbodeytzv Espfx Aaqei
* Overrun device for max. drawbar load 150 kg
* Automatically folding jockey wheel, static load max. 250 kg
* Spare wheel holder mounted to the front wall
* 2 wheel chocks with holders

Mudguards & Lighting Carrier
* 2 aluminum mudguards (tandem design), edged from 3 mm thick aluminum sheet
* Lighting carrier made from aluminum, side-mounted to corner posts
* Shock-protected mounting of rear lights
* Number plate with lighting mounted above on the roof frame

Body & Walls
* Body structure made from special aluminum extruded profiles
* Side walls made from aluminum hollow-chamber profiles
* Smooth interior and exterior finishes
* Front wall manufactured from aluminum profiles

Floor & Drainage
* Floor made from 30 mm thick aluminum sections
* Surface milled longitudinally and transversely
* Biosecurity edge at all ramp and door openings
* 1 floor drain with sealing cap in the rear floor area

Ventilation
* Ventilation openings on both sides above the sideboards, approx. 300 mm high
* With 2 manually operated sliding aluminum vents
* Vents can be locked with snap fasteners
* Lower ventilation openings with flaps

Doors, Roof & Ramp
* Front wall door without ventilation opening
* Clear door width approx. 800 mm
* Clear door height approx. 1,000 mm
* Roof made from solid, flat layered plastic panel (honeycomb panel)
* Rear wall as loading ramp, approx. 1,600 mm wide
* Spring-assisted
* Ramp surface made from aluminum checker plate
* Tread surfaces made from edged steel strips
* 2-part aluminum ramp railings, approx. 1,200 mm high
* Ramp can be opened as a door
* Ramp surface coated with Marotan

Interior Equipment & Partition System
* Swiveling aluminum partition, approx. 1,600 mm high
* Partition made entirely from aluminum
* Each partition with 2 integrated handgrips
* Partition can be secured to the side wall when open
* Partition can be installed in front of the front wall
* Partition can be installed at each side post and centrally
* Two rows of aluminum partition doors at the rear ramp, centrally divided

Lighting & Electrics
* Interior lighting:
* 1 LED interior lamp with protective grille
* Switch for interior light mounted in the lamp carrier
* Exterior lighting according to ECE Regulation 48
* Deviations from ECE Regulation 48 only by request and written agreement
* 2 lane marker lights on the lamp carrier
* 1 LED work light on the right side above the loading ramp
* 13-pin connector

Accessories & Finish
* 1 detachable rear skirt as underrun protection, reserved at front wall
* Body color: RAL 9060 silver

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.