Ανοιχτό ημιρυμουλκούμενο με μουσαμά

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, 1st axle lift, lifting roof, Vario Hole-FIX chassis, BPW axles, pallet stop strips left and right, sliding side curtain, sliding roof cover, toolbox, first owner, as new condition.

Permissible fifth-wheel load: 12,000 kg
Technically possible fifth-wheel load: approx. 12,000 kg
Permissible aggregate load: 24,000 kg (8,000 kg per axle)
Technically possible aggregate load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Unladen weight (standard spec): approx. 6,130 kg
Unladen weight (individual vehicle spec): approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load rating according to DIN EN 283 with test axle load of 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Total length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading length i.L.: approx. 13,620 mm
(G) Loading width i.L.: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tyre size 445/45R19.5
(H1) Unladen loading height, in driving position (level): approx. 1,020 mm
(H2) Laden loading height, in driving position (level): approx. 990 mm
(H3) Achievable ramp height at rear of vehicle with kingpin height 910 mm; laden, lifted: approx. 1,200 mm
Ride height set to 265 mm.
(K) Side through-loading height i.L.: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm]
(K1) Interior height under roof: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm], rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm]
(X1) Total height unladen, in driving position (level): = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Total height laden, in driving position (level): = H2 + K + T +/- body height adjustment
Body settings: The "Mega" body design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, side through-loading height, interior height) change according to the chosen body setting.

(T) Roof side construction height: approx. 180 mm. Due to roof beam design, the pallet-wide interior height i.L. matches the stated interior height under roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm
(P) Construction height above fifth wheel: approx. 90 mm
(S) Possible kingpin height, unladen: approx. 930 - 1,060 mm; level at approx. 930 mm (note total height!)
Brake system complies with ECE-R13
Electrical system complies with ECE-R48
Wabco brakes, air suspension
BPW three-axle ECO Air unit with disc brakes Ø 370 mm, ET 120, air suspension 260 mm stroke.
Tires: 6 x 445/45 R 19.5
Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in direction of travel
Vario Fix steel outer frame with 3 pairs of stanchion sockets
Mechanical/hydraulic lifting device, lift height from lowest point approx. 500 mm/600 mm, 4 control levers at each corner stanchion. Meets occupational safety guidelines BGV D 29. (Lifting roof can only be operated with doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only.
Hodpfx Agsyyc I Do Tok
"Daimler Load Securing DL 9.5" certificate.
Chassis, frame, and base equipment add-ons made of metal and corrosion-protected by KÖGEL KTL

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.