Δισκοσβάρνα

Väderstad Carrier 650, neue Scheiben, Messerwalze

Κατάσταση: καινούργιο, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 10.636 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., ύψος χώρου φόρτωσης: 2.300 χιλ., όγκος χώρου φόρτωσης: 60 m³, Chassis manufactured with self-supporting ALU (aluminum) construction, featuring corresponding reinforcements in the lower flange for especially high stability and strength; aggregate chassis made of ALUMINIUM, 140 mm frame height! (max. 39 tons) Axles and Suspension: "Disc brake 22.5"; Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axle separately liftable with start-up assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 (manufacturer's choice), Alcoa aluminum wheels DuraBright-11, 75x22.5 ET 120, king pin bolted into a 10 mm thick plate. Landing Legs: Aluminum drop legs, 2 x 10 ton support load, with swivel feet for air suspension. Brake System: As per E.G. standard, dual-line brake system, Wabco EBS E-system with RSS (Roll Stability Support), spring-loaded brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System: According to STVZO regulations with 2 LED five-chamber lights type Aspöck Europoint LED integrated into the ALU rear closure, 24-volt system with 1x 5-pin and 2x 7-pin sockets, with lateral LED outline marker lights, 2 separate LED work lights at the rear, 2 LED work lights since the 1st at the height of the landing legs, 1 LED work light inside front left, operable from outside. Body/Tipper Body: "Interior fully welded structure"; front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn. Aluminum tipper body with 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belt, inner plank profiles fully welded. Floor is a moving floor system laid on 140 mm ALU crossbeams, floor load approx. 7 t/m2, crossbeams installed closely (approx. 350 mm), ALU front wall with 600 mm plank profile, 2-3 mm thick, straight design, special ALU corner profiles slanted, smooth straight-design rear wall with 2 ALU swing doors 50/30mm thick with 4 locking bars, secured in welded ALU rear frame with Teflon and stainless steel bearings, swinging ALU wall suspended from reinforced upper belt with "Kevlar cover for complete emptying," lateral brush seals and additional Kevlar cover on the sides. Integrated discharge funnel with folding cover plate at rear left, operable from outside, viewing window rear left, sample slides in each rear door (total 2), service door front left. Bwodjfakkcepfx Amajr Hydraulic System: "Cargo Floor moving floor system installed in the floor with hydraulically driven ALU profiles mounted on ALU box profiles, supported by approx. 670 PE-HD sliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for hydraulic hose connection under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded in the floor, electric control rear left with cable control in lockable waterproof box. Accessories: PVC mudguards with rubber mud flaps, ALU spare wheel holder, side ALU underrun protection foldable design, 1 toolbox approx. 800x460x430 mm plastic, approx. 3.7 m ALU ladder, roll tarp 680 g/m2 quality with roll tarp system incl. side..