Χαμηλός φορτωτής

Humbaur HTD 40 v21

Κατάσταση: καινούργιο, Λειτουργικότητα: πλήρως λειτουργικό, κενό βάρος: 7.500 κιλ, μέγιστο βάρος φόρτωσης: 36.500 κιλ, συνολικό βάρος: 44.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.190 χιλ., πλάτος χώρου φόρτωσης: 2.540 χιλ., ύψος χώρου φόρτωσης: 900 χιλ., ανάρτηση: χάλυβας-αέρας, μέγεθος ελαστικού: 235×75 R17,5, μεταξόνιο: 1.310 χιλ., Έτος κατασκευής: 2024, Εξοπλισμός: ABS, κεντρική περιστρεφόμενη πλάκα, CETRATEK 4-Axle Low Loader TL89.4 (EU-COC) Short Description Robust low loader for heavy machinery transport. Chassis made from high-strength ST-52/S355 steel, optionally fine-grain S700 steel. Ramps with 20 t load capacity each, foldable mechanically or hydraulically with no loss of carrying capacity. Optional as low-bed; loading height in the area of the wheel recesses can be reduced from approx. 900 mm to approx. 500 mm. Dimensions / Configuration Overall length: 11,914 mm; Overall height: 3,775 mm (over ramps) Platform: Gooseneck 2,440 mm + load area 6,750 mm Width: 2,540 mm (+ each side extendable by 250 mm manually) Itedpfx Aeu Rbzvecusr Coupling to 1st axle: 2,767 mm; to 2nd/3rd axle: 6,136 mm Axle spacing: front 1,310 mm; rear 1,360 mm Platform height: 900 mm (low-bed ~500 mm), track width 1,850 mm Rear ramps: 3,000 × 750 mm, laterally adjustable, 20 t per ramp Drawbar eye height: 400–900 mm; Turntable Ø 110 (CYR) Floor: steel + 45 mm hard beech wood, clear-coated Weights / Capacity a) GVW 44,000 kg → Payload approx. 36,500 kg* b) On-road 24,000 kg → Payload approx. 16,500 kg * Version a) subject to exemption permit under §70 German Road Traffic Licensing Regulations (StVZO); inspection/certification by DEKRA available for a surcharge. Drawbar eye Ø 50 mm (optionally Ø 40 mm), unladen weight approx. 7,500 kg Rear supports: manual (option for hydraulic) Steel Construction / Running Gear Welding qualification TS EN ISO 9606-1, processes TS EN ISO 4063, shielding gases TS EN ISO 14175 4 × 11 ton axles (TRAX), 235/75 R17.5 tyres (16 pcs, PETLAS or equivalent; Continental/Michelin optional at extra cost), wheels 6.75×17.5, air suspension, approved for max. 100 km/h Brakes / Electrics WABCO EBS 4S/2M, brake linings 330×200, air tanks 2×80 L + 1×60 L Brake cylinders: 4× Type 24 + 4× Type 24/30, levers 165 mm Voltage 24 V (12-V towing vehicle may require a voltage converter) Side reflectors: 4× LED each side + 2× white front reflectors, tail lights 2× LED, 2 triangular reflectors Connections: 7-pin EBS ISO 7638, 7-pin ISO 1185/3731, 15-pin ISO 12098 Tractor operation note: 12→24 V converter and ABS/EBS connection (ISO 7638) and power supply (e.g. ISO 1185/12098) required for the on-board hydraulics. Hydraulics (Ramps) 2 cylinders, incl. changeover valve for operation via the tractor's on-board hydraulics Accessories (Excerpt) 2 tool boxes, 2 wheel chocks (metal), fire extinguisher box Reflectors (side white/yellow; yellow/red extendable), rectangular rear reflectors Lashing rings: 7 per side + 6 on the platform (10 t per ring) Mudguards (front/rear), hose/cable holders on the drawbar Paint Structure Sandblasted, 3× epoxy primer, 3× acrylic (≈ 230 µm), 1× acrylic clear coat Warranty 2 years on frame construction and axles (excluding accidents/operator error) 2 years on electrical system & brake system (excluding consumables such as brake linings, accidents/operator error) 1 year on paintwork (excluding accidents/operator error) Technical and price modifications reserved. Images serve as examples and may show optional equipment.

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 31.630 κιλ, συνολικό βάρος: 40.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.250 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at rear * 24 V - 15-pin and additional 12 V - 7+4-pin power cables * Extended connecting cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Powder-coated steel tool box and spare wheel holder (basket version) on right side * Enclosed single plastic mudguard at front * Straight steel spray flap rear mudguards with spray suppression * Side underrun protection * Extended offset cranking 500 mm forward * Turntable platform extension at front by 520 mm with 45° corners, three recessed lockable compartments with lids * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and in low-bed platform 60 mm, softwood * Outermost planks of ramps made of 50 mm bamboo * Four stake pockets on each side (without stakes) with simultaneous 2 t lashing option * Lashing package includes: 2 tie-down points 6.4 t front left and right on main frame of turntable platform; one pair of 13.4 t lashing rings front and rear on each outer frame; four pairs of 10 t tilting and lowering lashing rings per side, loadable in all directions and recessed in outer frame; two pairs of 6.4 t lashing rings on side in excavator boom storage; eight pairs of galvanized folding outriggers for 3 m overall width (not at rear incline) Itedpfx Aorczm Djcuer * Extension planks stored in compartment left side * Excavator boom storage above rear axle to end of loading slope approx. 2,300 x 740 x 190 mm * Mechanical rear drop legs * Hydraulic hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulically adjustable side ramp shift on sliding tube from ramp shaft * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm loading slope) * Chassis, turntable, ramps, and mechanical rear folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 46 / 2025

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 31.630 κιλ, συνολικό βάρος: 40.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.250 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at rear * 24 V - 15-pin and additional 12 V - 7+4-pin power cables * Extended connecting cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Powder-coated steel tool box and spare wheel holder (basket version) on right side * Enclosed single plastic mudguard at front * Straight steel spray flap rear mudguards with spray suppression * Side underrun protection * Extended offset cranking 500 mm forward Iodpfx Ael Th Evecustr * Turntable platform extension at front by 520 mm with 45° corners, three recessed lockable compartments with lids * Chassis made of high-strength fine-grained steel * Floor above turntable platform made of 50 mm, and in low-bed platform 60 mm, softwood * Outermost planks of ramps made of 50 mm bamboo * Four stake pockets on each side (without stakes) with simultaneous 2 t lashing option * Lashing package includes: 2 tie-down points 6.4 t front left and right on main frame of turntable platform; one pair of 13.4 t lashing rings front and rear on each outer frame; four pairs of 10 t tilting and lowering lashing rings per side, loadable in all directions and recessed in outer frame; two pairs of 6.4 t lashing rings on side in excavator boom storage; eight pairs of galvanized folding outriggers for 3 m overall width (not at rear incline) * Extension planks stored in compartment left side * Excavator boom storage above rear axle to end of loading slope approx. 2,300 x 740 x 190 mm * Mechanical rear drop legs * Hydraulic hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulically adjustable side ramp shift on sliding tube from ramp shaft * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (incl. 860 mm loading slope) * Chassis, turntable, ramps, and mechanical rear folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 46 / 2025