Μεταχειρισμένο Eschlböck Οι Υπολοιποι προς πώληση (6)

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 2007, ώρες λειτουργίας: 3.651 h, Συνολικό βάρος: 12.000 kg Βάρος χωρίς φορτίο: 11.200 kg Συνολικό μήκος: 5.500 mm Πρόσθετες πληροφορίες: - Ώρες λειτουργίας: 3.651 - Ισχυρός βιομηχανικός τεμαχιστής ξύλου Hsdpfxov R Si Te Ahyjfn - Υδραυλικά αναδιπλούμενη χοάνη τροφοδοσίας - Ισχύς μετάδοσης μέσω PTO: 130 - 270 kW - Επεξεργασία όλων των τύπων ξύλου έως διάμετρο 55 cm - Άνοιγμα τροφοδοσίας: 55 x 98 cm - Ταινία τροφοδοσίας με αλυσίδα 70 cm - Αριθμός μαχαιριών τεμαχιστή: 14 - Διαχωρισμός και τεμαχισμός - Κίνηση μέσω PTO του ελκυστήρα - Μακριά ταινία τροφοδοσίας με αλυσίδα - Πλευρική φόρτωση - Φορτωτικός γερανός Krones 7010XL - Μήκος: 5.500 mm - Ύψος: 3.700 mm - Ελαστικά 435/50R19,5

Κατάσταση: μεταχειρισμένο, BIBER 3-21 PTO SHAFT Eschlböck Biber 3-21 PTO Shaft Weight approx. 1,080 kg Standard Equipment - Wood diameter up to 21 cm - Infeed width 24 cm - Disc wheel chipper with chipper disc diameter 93 cm - 3 chipping knives 28 mm, re-sharpenable - Counterknife + 2 lateral counterknives (wear and angle protection), double-sided usable - Grinding wheel mounted on the machine - Separate hydraulic circuit - Hydraulic tank 35 liters - 2 hydraulically driven hardened feed rollers - 2 oil motors and parallel bearing - Fill level and temperature display for hydraulic oil - Adjustable chip length - Chipping length 1 to 3 cm electro-hydraulically adjustable Hodpfx Asxmlmgjhyjfn - 2 x 3 exchangeable stop plates in the disc wheel and post-crushing comb for precise chip quality - Smart Control - Operator-guided control with visualization of feed speed, adjustable chip length and overload protection, incl. operating hour meter (daily and total hours) - Mode selection for desired chip quality - Safety devices for manual feed - 2 control bars and one stop bar, with release and emergency stop buttons on both sides - Discharge chute infinitely rotatable 270 degrees with adjustable discharge flap, operable from ground level - Discharge height from ground 3,250 mm - Drive - via PTO shaft (30 to max. 80 kW) - PTO speed 540, 750, 1000 - Driveshaft with overload and freewheel clutch - 3-point linkage - Paint RAL 3020 traffic red RAL 7015 slate grey - Lighting for 3-point linkage B3

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 2023, Εξοπλισμός: πνευματικό φρένο, BIBER 60 ZK Eschlböck Wood Chipper with 3 cm screen Biber 60 ZK for crane feeding with crane Epsilon C50F 86 > Chipping system: drum chipper > Maximum wood diameter: up to 40 cm > Infeed opening: 40 x 70 cm > Long infeed chain conveyor (2 m) > Side feeding > Chipper drum with 10 pairs of offset chipper knife blades > Counter knives (three-piece), double-sided usable > Drum diameter: 648 mm > Easily replaceable screens: 3 or 5 cm chip length > Standard incl. 1 screen, installed for desired chip length > Discharge: auger discharge incl. clearing system, blower diameter approx. 1270 mm > Dedicated hydraulic circuit with 220 L hydraulic tank with level and temperature gauge for hydraulic oil > Reinforced hydraulic drive with gearbox-assisted infeed > Control panel for all functions: pluggable on the machine, with cable remote control, mountable in tractor cab > Infeed belt and flap electro-hydraulically operated > Smart-Control for infeed speed control incl. visualization, operator-guided control, adjustable chip length, and overload protection (no stress) incl. hour meter (daily and total hours) > Discharge chute hydraulically raiseable and foldable, infinitely rotatable by 240°, with adjustable discharge flap > Infeed hopper liftable and lowerable > Drive: via PTO shaft (from approx. 80 kW up to max. 150 kW) > PTO speed: 1000 rpm > V-belt drive for SPC belts > Drive shaft with overload and freewheel clutch > Travel axle incl. lighting, top or bottom hitch, tire size 560/45 R 22.5 > Paint: RAL 3020 traffic red Crane Epsilon C50F86 > Max. reach: 8.60 m > Net lifting moment: 54 kNm > Net slewing torque: 18 kNm > With foldable crane feeding hopper > Single axle, 40 km/h or 60 km/h incl. dual-circuit air brake > Automatic towing hitch for air-braked 2-axle trailer up to 8 t GVW > Crane with outriggers > Incl. 4-finger grapple HSP 020BIO HD and rotator > Danfoss control block with electric joystick, Prof 1 operation, 6 proportional and 2 on/off functions for hydraulic outriggers (cable remote control) > 2x LED work lights > Hydraulic oil supply from tractor, minimum oil flow 120 l/min > Load-sensing activation from tractor required > Weight approx. 8,230 kg Spaltbiber for Biber 60 Hfodjv H Smwepfx Ahyon

Κατάσταση: μεταχειρισμένο, Έτος κατασκευής: 2010, _____6.500 ώρες λειτουργίας, με γερανό Epsilon M70, τοποθεσία: πελάτης Hsdpev Dqifefx Ahyofn

Κατάσταση: καινούργιο, Έτος κατασκευής: 2023, BIBER 3-21 PTO Eschlböck Wood Chipper Weight approx. 1080 kg Standard Features Wood diameter up to 21 cm Feed width 24 cm Disc chipper with Chipping disc diameter 93 cm 3 chipping knives, 28 mm, resharpenable Counter-knife + 2 lateral counter-knives (wear and angle protection), double-sided usable Grinding wheel on the machine Own hydraulic circuit Hydraulic tank 35 liters 2 hydraulically driven hardened feed rollers 2 oil motors and parallel mounting Level and temperature indicator for hydraulic oil Chipping length adjustment Chip length 1 to 3 cm, adjustable electro-hydraulically 2 x 3 exchangeable stop plates in the chipping disc and secondary reduction comb for precise chip material Smart Control Operator-guided control with visualization of feed speed, adjustable chip length and overload automatic control, incl. hour meter (day and total hours) Hfjdov H Smqopfx Ahyon Mode selection for desired chip quality Safety devices for manual feeding 2 control bars and one stop bar, dual-sided release buttons and emergency stop Discharge chute steplessly rotatable 270 degrees with adjustable discharge flap, operable from ground level Discharge height from ground 3250 mm Drive via PTO shaft (30 up to max. 80 kW) PTO speed 540, 750, 1000 Drive shaft with overload and overrun clutch Three-point mounting Paintwork RAL 3020 traffic red RAL 7015 slate grey - Included in delivery: - Operating manual - Spare parts list - Declaration of conformity - Certificate for obtaining operating permit (applies only to towed machines) - Tool kit Lighting for three-point mounting

Κατάσταση: καινούργιο, Έτος κατασκευής: 2023, BIBER 6 ON SINGLE AXLE Eschlböck Biber 6 on Single Axle - 3 cm screen, - Eschlböck wood chipper - Single axle 25 km/h, incl. lighting, high hitch, - Tire size 10.0/75-15.3 10 PR, - Weight (standard equipment) approx. 2,650 kg Standard Equipment - Chipping system: drum chipper - Maximum wood diameter: 32 cm - Infeed opening: 32 x 49 cm - Infeed chain conveyor 0.5 m long - Feed table: total length incl. foldable hopper: 153.5 cm, feed height: 73 cm - Side feeding - Chipper drum with 4 quick-change knife blades - Counter blade (two-part), reversible - Drum diameter: 534 mm - Easily interchangeable screens: 2, 3, 4, or 5 cm chip length - Supplied with 1 screen installed for desired chip length - Own hydraulic circuit with 90 l hydraulic tank, includes fill level and temperature indicator for hydraulic oil - 1 hydraulically pre-pressing feed roller and 1 chain infeed conveyor - Continuously adjustable feed speed - Safety equipment for manual feeding Hfedpfsv H Sm Djx Ahyen - Three-sided stop bar in front of infeed chute - Release button and emergency stop on both sides - Reverse function at control panel - Strong, transparent safety curtain - Smart-Control: - Operator-guided control of infeed speed with visualization, adjustable chip length and overload protection (no-stress), incl. operating hour counter (daily and total operating hours) - Discharge: 2 discharge augers, blower diameter over 1 m - Discharge chute can be continuously rotated 280°, with adjustable discharge flap operable from ground level - Discharge height from ground: 355 cm - Drive: via PTO (from approx. 40 kW up to max. 100 kW) - PTO speed: 540 rpm - V-belt drive - PTO shaft with overload and freewheel clutch - Paint finish: RAL 3020 traffic red The tractor must have a power socket (for forestry plug, 3-pin) installed to ensure uninterrupted power supply to the chipper. - Ex works Prambachkirchen / Austria Included upon delivery: - Operating manual - Certificate for type approval (valid only for towed working machines) - Tool kit