Ρυμουλκούμενο χαμηλού φορτίουMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Ρυμουλκούμενο χαμηλού φορτίου
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
σταθερή τιμή συν ΦΠΑ
27.900 €
(33.201 € μικτό)
Έτος κατασκευής
2026
Κατάσταση
Καινούριο
Τοποθεσία
Egestorf 

Βασικά δεδομένα
- Ονομασία:
- Ρυμουλκούμενο χαμηλού φορτίου
- Κατασκευαστής:
- MÜLLER-MITTELTAL
- Έτος κατασκευής:
- 2026
- Κατάσταση:
- καινούργιο
Τιμή & Τοποθεσία
σταθερή τιμή συν ΦΠΑ
27.900 €
(33.201 € μικτό)
- Τοποθεσία πωλητή:
- Eichenstich 12, 21272 Egestorf, Γερμανία

Καλέστε
Τεχνικές λεπτομέρειες
- Μέγιστο βάρος φόρτωσης:
- 8.650 κιλ
- Συνολικό βάρος:
- 11.900 κιλ
- Διάταξη αξόνων:
- 2 άξονες
- Μήκος χώρου φόρτωσης:
- 5.000 χιλ.
- Πλάτος χώρου φόρτωσης:
- 2.420 χιλ.
- Ύψος χώρου φόρτωσης:
- 500 χιλ.
Λεπτομέρειες προσφοράς
- Αναγνωριστικό αγγελίας:
- A104-26-970
- Αριθμός αναφοράς:
- 61561
- Ενημέρωση:
- τελευταία στις 06.05.2026
Περιγραφή
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar (approx. 300 mm), with 40 mm flange drawbar eye
----Electrical / Lighting:
* RDÜ tire pressure monitoring system
* Multi-voltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Rear: 2 mechanical folding supports
* Plastic tool box, right-hand side
* 2-step step, front left (in direction of travel)
* Bolted underride guard
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearings, 2 additional on the front wall
* Steel pallet 3-way tipping body (continuous side walls – without central stanchions – folding side walls with sidewall spring lift, rear tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Rear ramp mounting rail
----Load Securing:
* 1 x 5 t lashing ring in each corner
* Side: 4 x 3 t recessed lashing rings each in the outer frame
----Ramps:
* 1 pair aluminum ramps, approx. 3310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps, fitted under the loading bed in the chassis, accessible from the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tanks, flange drawbar eye, and support winch painted in black
* Side walls painted in desired RAL color shade (no special or metallic paintwork). Color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery time:
* Available from approx. calendar week 28 / 2026
Rodpfx Aqsl Thw Ijvscb
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
----Brakes:
* Wabco EBS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar (approx. 300 mm), with 40 mm flange drawbar eye
----Electrical / Lighting:
* RDÜ tire pressure monitoring system
* Multi-voltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General Attachments:
* Mechanical support winch at the front
* Rear: 2 mechanical folding supports
* Plastic tool box, right-hand side
* 2-step step, front left (in direction of travel)
* Bolted underride guard
* Plastic quarter mudguards
----Tipper Body:
* Net hooks on the sides and rear in the central locking bearings, 2 additional on the front wall
* Steel pallet 3-way tipping body (continuous side walls – without central stanchions – folding side walls with sidewall spring lift, rear tailgate foldable and swinging via manual central locking)
* 4 mm steel floor
* Rear ramp mounting rail
----Load Securing:
* 1 x 5 t lashing ring in each corner
* Side: 4 x 3 t recessed lashing rings each in the outer frame
----Ramps:
* 1 pair aluminum ramps, approx. 3310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment for ramps, fitted under the loading bed in the chassis, accessible from the rear
----Tyres:
* Tyres 385/55 R 19.5
----Paintwork:
* Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanized
* Axles, springs, air tanks, flange drawbar eye, and support winch painted in black
* Side walls painted in desired RAL color shade (no special or metallic paintwork). Color can be changed up to approx. 6 weeks before completion
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images
----Delivery time:
* Available from approx. calendar week 28 / 2026
Rodpfx Aqsl Thw Ijvscb
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένος από: 2001
170 Αγγελίες online
Αποστολή αιτήματος
Τηλέφωνο & Φαξ
+49 40 33... αγγελίες
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα





























































