Πλαϊνό κλαρκ

Baumann HX50/12/50 ST

Κατάσταση: καινούργιο, κενό βάρος: 9.300 κιλ, μέγιστο βάρος φόρτωσης: 30.100 κιλ, συνολικό βάρος: 39.400 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 8.600 χιλ., πλάτος χώρου φόρτωσης: 2.540 χιλ., ύψος χώρου φόρτωσης: 860 χιλ., ανάρτηση: αέρας, μέγεθος ελαστικού: 235/75 R17.5, Εξοπλισμός: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Extendable loading area: - Extendable loading platform with rear chamfer approx. 1,000 mm x 8° - 5 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings in the front section of the loading area (LC 10,000 daN) - Cut-outs in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, anti-slip chequer plate over the axles Landing gears: - JOST mechanical landing gears with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres 235/75 R17.5 3PMSF Included accessories: - 2" kingpin - One galvanised steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanised connection strip at the front - 2 wheel chocks with holders on the front wall - One spare wheel with holder mounted in front of the front wall - Electro-hydraulic power pack - Rear axle steering, operable from the front and rear using cable remote control with push buttons, including single-track axle tracking control Tjdpeyxc Eysfx Ahdjc - European reflective panels (red-yellow) on the rear of the trailer - White reflective tape according to EU regulations on the sides and extension, red at the rear - Bracket for warning signs on both the gooseneck and rear, left and right, including socket - Movable hook-on bar for ALU loading ramps at the rear of the vehicle - Bracket for beacon at the rear of the trailer - Galvanised folding supports under the sloped edge of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable guard on pump - Removable ALU side and rear boards on the gooseneck, approx. 2,440 x 400 mm - Removable rear galvanised posts (build length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container - 6 pairs of stake pockets for removable stakes 100 x 50 mm in the outer frame of the loading area - INOX toolbox 1,500 x 390 x 810 under the loading area on the right in direction of travel - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - Holder for beacon mounted on the warning signs - Radio remote control for rear axle steering, in addition to the cable remote control, with indicator lights on receiver for single-track monitoring - Sand coating applied to chequer plates on gooseneck and loading area for anti-slip protection - 80 km/h speed limit stickers at rear and on both sides - Axle load pressure gauge for determining axle loads, including load chart