ημιρυμουλκούμενο χαμηλής φόρτωσης

MAX Trailer 2-Achs-Tele-Semi Sattelauflieger

Gooseneck:
- Gooseneck with rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- 30 mm thick hardwood flooring

Extendable loading area:
- Extendable loading platform with rear chamfer approx. 1,000 mm x 8°
- 5 pairs of outward folding lashing rings (LC 5,000 daN)
- 3 pairs of outward folding lashing rings (LC 10,000 daN)
- 1 pair of recessed lashing rings in the front section of the loading area (LC 10,000 daN)
- Cut-outs in the outer frame of the loading area for attaching tension straps (LC 2,000 daN)
- Approx. 48 mm thick hardwood flooring, anti-slip chequer plate over the axles

Landing gears:
- JOST mechanical landing gears with 2-speed gearbox for 24t lifting capacity (50t test load)

Njdpsyxc Eyjfx Ah Sswd
Axles and tyres:
- BPW axles, hydro-mechanically forced steered
- Technical axle load: 12,000 kg
- Air suspension with lift and lower valve
- Axle tools
- TPMS tyre pressure monitoring system according to ECE R 141
- Tyres 235/75 R17.5 3PMSF

Included accessories:
- 2" kingpin
- One galvanised steel front wall, approx. 400 mm high
- Yellow-red air couplings on the galvanised connection strip at the front
- 2 wheel chocks with holders on the front wall
- One spare wheel with holder mounted in front of the front wall
- Electro-hydraulic power pack
- Rear axle steering, operable from the front and rear using cable remote control with push buttons, including single-track axle tracking control
- European reflective panels (red-yellow) on the rear of the trailer
- White reflective tape according to EU regulations on the sides and extension, red at the rear
- Bracket for warning signs on both the gooseneck and rear, left and right, including socket
- Movable hook-on bar for ALU loading ramps at the rear of the vehicle
- Bracket for beacon at the rear of the trailer
- Galvanised folding supports under the sloped edge of the loading area
- Mudflap at the rear of the trailer
- Manual and documentation on USB stick
- Centralised lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable guard on pump
- Removable ALU side and rear boards on the gooseneck, approx. 2,440 x 400 mm
- Removable rear galvanised posts (build length approx. 2,560 mm)
- 3 pairs of WADER container pockets in the loading area for 1x 20ft, 1x 30ft, or 1x 40ft container
- 6 pairs of stake pockets for removable stakes 100 x 50 mm in the outer frame of the loading area
- INOX toolbox 1,500 x 390 x 810 under the loading area on the right in direction of travel
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with a position light
- Holder for beacon mounted on the warning signs
- Radio remote control for rear axle steering, in addition to the cable remote control, with indicator lights on receiver for single-track monitoring
- Sand coating applied to chequer plates on gooseneck and loading area for anti-slip protection
- 80 km/h speed limit stickers at rear and on both sides
- Axle load pressure gauge for determining axle loads, including load chart

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.