Ημιρυμουλκούμενο χαμηλής φόρτωσης

SCHWARZMÜLLER RH240 Jumbo Plateau Tieflader ausziehbar > NEU <

Schwarzmüller RH240

Jumbo flatbed semi-trailer low-loader

extendable telescopic – for building material and construction machinery transport

- NEW - UNUSED -

Gross vehicle weight: 36,000 kg
Unladen weight: 10,340 kg

Psdpeu A Nilofx Aazorc
Internal length approx. 13,570 mm =
Front platform length approx. 3,950 mm
Rear platform length approx. 9,620 mm

Platform width at lower deck approx. 2,540 mm

Loading height in the lowered deck (unladen) approx. 830 mm

Frame:
Extendable central frame weldment design

Extension length 6,000 mm

Pneumatically lockable with operation on the trailer + additional position for 40ft container in the lowered deck

Reinforced version for building material transport, rated for 20 t over 5 m at center of gravity and up to 20 t construction machinery transport

Frame suitable for transportation of timber components L/W/H approx. 13,000/575/3,200 mm

Reinforced frame for point loads at front and rear at support blocks

Reinforced outer frame in stepped platform, 6 mm

Reinforced outer frame in low bed, 6 mm

Conical cross members

Movable intermediate support approx. 300 mm (non-removable), mechanically lockable, designed as stanchion cross member for 80x80 mm square tube stanchions, as well as 1 pair of 5 t lashing rings externally integrated in the intermediate support

Frame for 2-axle tractor unit, saddle height (unladen) approx. 960 mm - 1,020 mm with air-suspension tractor

Front: 3 pairs, rear: 10 pairs of 10 t retractable lashing rings each, both sides on outer frame, can also be folded outward for wide load securing

10 pairs of lashing mushrooms with welded round bar on underside of outer frame

Frame fittings:
10 pairs of plug-in sockets with reinforcement beams for 80x80 mm square tube stanchions, both sides along outer frame
6 stanchion cross members for 80x80 mm square tube stanchions
24 steel square tube containment stakes 80x80x5 mm, usable height approx. 2,000 mm, tops with lashing holes for tension straps, hot galvanized
3 pairs of container locks recessed into the low-bed platform, for:
1 x 20ft container
1 x 30ft container
1 x 40ft container when extended

U-profile rail for drive-up ramps at rear frame

Support equipment:
Mechanical steel support winches, 2 x 12 t
2 drop-down supports, both sides at rear frame

Wheels:
Tyres: 205/65 R 17.5
Steel rims: 6.00 x 17.5

Axles:
SAF low-loader axles with drum brakes
Axle lift on first axle
Axle spacing 1,310 + 1,410 mm
Steerable SAF trailing axle, approx. 20° steering angle, electro-pneumatic reverse lock automatic via reverse gear
Last axle is force-steered

Braking system/Suspension:
Braking system by Wabco
Brake/air connections with 2 single coupling heads yellow/red
EBS/ABS socket at front
Air suspension with lifting and lowering facility, total stroke approx. 200 mm
Automatic reset to programmed ride height above 15 km/h

Assistance/Safety Systems:
Standard data reporting interval:
every 15 minutes with ignition on
every 24 hours with ignition off
Axle load display via EBS-CANBUS signal for display in cab (truck must be correspondingly prepared)
Wabco SmartBoard for data reading via display (mileage, axle unit load, brake diagnostics etc.)

Floor:
35 mm larchwood flooring, impregnated both sides, longitudinal fitted with small gaps, above axles with steel chequer plate covering

Front bulkhead:
Fixed profiled steel bulkhead, approx. 2,700 mm high with 2 central pillars
2 front corner posts, integrated in bulkhead, bolted on face side
Each with 2 lashing eyes at

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.