Ρυμουλκούμενο roll off

MÜLLER-MITTELTAL RA-T 18,0 Außenroller, feuerverzinkt, Neu

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 18.900 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 7.000 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll containers * Steel floor with wheel recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 – 7,000 mm * Pneumatic 4-way locking clamp as well as mechanical plug-in stops at the front in the running tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 repositionable skip holders for lateral centering of the skips, front 4 skip holders plug-in with pivotable stops Cgodpfx Aotplv Tenpst ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and frictional securing of skips * 4 cloverleaf-shaped lashing slots on each side, and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded bead as anti-slip surface in the ramp track area * 1 pair of aluminium access ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Painting: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar and air tanks painted in a black tone * Hot-dip galvanized main frame ----Information: * Permissible gross vehicle weight of 27,000 kg technically possible * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale reserved ----Delivery Time: * Available from approx. calendar week 47/2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 13.700 κιλ, συνολικό βάρος: 18.000 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 7.000 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TRA 18.0: * 2-in-1 design: suitable for hook-lift containers and use as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lowering device including RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment ----Electrical / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal - no truck-side installation required * LED tail lights 12 / 24 V * 15-pin electrical connector ----General Fittings: * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact guard buffers * Foldable rear A-sign ----Loading Platform: * Main frame with raised outer rails to guide roller containers * Steel floor with recessed rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamp lock and mechanical plug-in stop angles at the front in the running rail, load securing certificate in accordance with DIN 30722 - 1 * Weld bead as anti-slip coating in the inclined loading area * Mechanical rear props ----Load Securing: * 1 pair 10 ton UVV lashing rings at the front bulkhead support * 3 pairs 10 ton UVV lashing rings on the side outer frame * Each side with 4 x 2 ton cloverleaf lashing points * 4 x 8 ton lashing shackles recessed in the outer frame ----Ramps: * 1 pair aluminum access ramps (10.6 tons/pair) 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Painting: * Chassis, bogie, locking parts, rear props hot-dip galvanized * Drawbar, axles, air tanks painted in black tone ----Information: * New vehicle without initial registration, supplied with full manufacturer warranty * Subject to errors and prior sale * Sample images Codpfx Anjl Tq Nmjpogt ----Delivery Time: * Available approx. from calendar week 43 / 2026