Ημιρυμουλκούμενο

Wiese Baustoffauflieger - Heckkran Kran Fassi

Wiese Construction Material Semi-Trailer

Weights:

- Fifth-wheel load: 12,000 kg
- Axle load: 27,000 kg
- Permissible gross weight: 39,000 kg
- Unladen weight: 10,840 kg

Length:
- Loading area length: approx. 9,200 mm
- Total length: approx. 10,600 mm

Width:
- Internal width: 2,480 mm
- Overall width: 2,550 mm

Kingpin:
- 1 position with 2" kingpin

Coupling height:
- In horizontal position approx. 1,160 mm

Top edge of main beam (without floor):
- approx. 1,380 mm

Loading height:
- approx. 1,410 mm

Lashing hole outer frame D=30 mm with perforated strip on the slope (160 mm high / 30 mm floor drop / 4 mm wall thickness)

Main beam spacing:
- 980 mm (center/center) - 1,130 mm (outer/outer)

Axles:
- 3 axles, each with 9,000 kg load capacity
- Make: SAF with disc brakes D=430 mm
- Track: 2,040 mm
- ABS: 1 axle monitored
- Axle spacing: approx. 1,510 mm / approx. 1,510 mm

Suspension:
- Original SAF air suspension, with raise/lower valve and catch cables

Axle lift:
- Axle lift on 1st axle, automatically load-dependent as start-up aid, switchable via button in driver’s cab

Steering:
- Mechanical forced steering on axle 2 + 3
- Double-rod steering by Tridec

Braking system:
- 2-line Wabco compressed air brake system according to EU regulation 71/320/EEC with:
- EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket
- 1x ISO coupling head yellow
- 1x ISO coupling head red
- Spring-loaded parking brake on 2 axles
- All mounted with quick couplings
- Aluminum air tanks
Dedpfxew Tgcwe Adtjcn

Air system:
- Compressed air installation with:
- 1x lift/lower valve
- 1x level control valve
- Aluminum air tanks
- All mounted with quick couplings
- Automatic lowering of air suspension during crane operation

Tyres:
- 6 units, type: 385/65 R22.5"
- Manufacturer: as selected by manufacturer
- Tyre pressure monitoring system on all 6 tyres, indicator in driver’s cab

Rims:
- 6x steel rims 11.75x22.5", 10-hole, hub-centered, offset: 120 mm

Support system:
- Mechanical landing legs with T rocking foot, permissible lifting load: 2x 12,000 kg
- Operable from one side, two speeds
- Manufacturer: as selected by manufacturer

Wheel covers and mud flaps:
- 6x plastic half-shell wheel covers
- Mudguard mounting reinforced with flat steel
- Note: Mudguard on steering axle 3 has inner cut-out

Lighting system:
- 24V lighting system in accordance with EU directive 76/756/EEC including:
- 2x multi-chamber tail lights
- Side marker lights
- Number plate illumination
- LED side marker lights with indicator function
- 2x 7-pin and 1x 15-pin socket connected to EU standard
- Tail lights mounted in reinforced light bracket = certified rear underrun protection
- All necessary markings

Additional installations:
- Electrical connection for crane control prepared as per requirements

Protective equipment:
- Lateral underrun and rear underrun protection in aluminum as per EU regulations

Floor:
- OKULEN floor 32 mm

Body:
- Straight front wall, 1,200 mm high, rigidly welded from 4x steel profiles, welded to front plate, filled with aluminum hollow section
- Interior wear plate 625 mm high, galvanized steel
- Both sides with Kinnegrip stakes K20/1,100 mm for full-through loading
- Straight rear wall, 1,100 mm high, rigidly welded from 4x steel profiles, welded to rear plate, filled with aluminum hollow section
- Interior wear plate 625 mm high, galvanized steel
- Both sides with Kinnegrip stakes K20/1,100 mm for full-through loading
- 2x3

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.