Ανοιχτό ημιρυμουλκούμενο με μουσαμά

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 29.804 κιλ, συνολικό βάρος: 36.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 10/2022, μήκος χώρου φόρτωσης: 13.571 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., ύψος χώρου φόρτωσης: 3.006 χιλ., συνολικό πλάτος: 2.550 χιλ., Έτος κατασκευής: 2022, Εξοπλισμός: ABS, Krone SD Curtain-Sider Mega Edscha Lifting Roof 2x Lift Axle (1st axle + 3rd axle) Multilock Outer Frame Perm. total weight: 36,000 kg Curb weight: 6,196 kg Payload: 29,804 kg Unladen coupling height: approx. 985 mm BPW axles 1st and 3rd axle liftable Air suspension Disc brakes Edscha sliding roof Lifting roof Hydraulic lifting roof with 500 mm total lift, each corner stanchion can be raised separately Lightweight curtain, sliding curtains on both sides Portal rear doors Side, rear, and right underride protection 2x landing legs Access ladder rear right Toolbox left Toolbox right Forklift-compatible floor Metal bump stops Multilock external frame ABS, EBS, ALB DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,571 x 2,480 x 3,006 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Rear door opening height: 2,785 mm Rear door opening width: 2,480 mm (interior) Tyres: 435/50R19.5 on ALCOA alloy rims Tread depth left front: 7 mm, left center: 9 mm, left rear: 7 mm Tread depth right front: 14 mm, right center: 9 mm, right rear: 7 mm Additional equipment: Type: SD Fits tractor unit (ISO 1726 restricted – tractor data required!) Fifth wheel–to-support leg distance: approx. 2,720 mm Unladen coupling height: approx. 985 mm Double-T longitudinal beams and middle beams as well as perimeter frame welded with cross beams and outriggers Multilock external frame, universal load securing options every 100 mm Front body height: 80 mm (including floor and fifth wheel plate) 2" fifth wheel coupling Rear underrun protection to EC directive Hpjdpfx Aex E Ib Teczsa Side underrun protection to EC directive Sliding step at rear Door retainer Two mechanical support winds, 2 x 12 t, half-round with base plate Support wind operation single-sided, at front right 3 axles, each 9,000 kg capacity BPW axles, 19.5", air suspension (total stroke 260 mm) and disc brake (ET 120) Brake disc diameter 370 mm With lifting and lowering device, including automatic driving height reset Fully automatic load-dependent electronic lift axle control for 1st and 3rd axles Manual function at control panel for forced lifting (= starting aid per directive 97/27/EC) and forced lowering via rotary switch Note: Reduced ground clearance in lift axle area! Lifting axle switching sequence: 3rd axle lifts first/lowers last Plastic mudguards Spray protection device to EC directive Brake system to ECE Regulation 13 (including vehicle stability function) Spring-loaded parking brake Brake hose couplings front approx. 675 mm above platform Diagnosis via ISO7638 interface (EBS power cable) Standard air couplings ISO 1728 (palm couplings) Brake system make: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signal system to ECE 48 2 LED number plate lights 2 LED outline marker lamps with rubber arm LED side marker lamps with indicator function (flashing) Electr. cable connectors front approx. 450 mm above platform 24 volt system, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 front, for auxiliary functions Additional 15-pin socket DIN ISO 12098 front Multifunction tail lights Steel rear bumpers

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 29.804 κιλ, συνολικό βάρος: 36.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 10/2022, μήκος χώρου φόρτωσης: 13.561 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., ύψος χώρου φόρτωσης: 3.003 χιλ., συνολικό πλάτος: 2.550 χιλ., Έτος κατασκευής: 2022, Εξοπλισμός: ABS, Krone SD Curtain Side Mega with Edscha sliding roof, lifting roof, 2x lift axles (1st + 3rd axle), Multilock external frame Permissible total weight: 36,000 kg Curb weight: 6,196 kg Payload: 29,804 kg Fifth wheel height unladen: approx. 985 mm BPW axles Lift axle 1st + 3rd axle Air suspension Disc brakes Edscha sliding roof Hydraulic lifting roof with 500 mm total lift, separately operable at all four corner stanchions Tarpaulin with reinforcement band, sliding curtains on both sides (right and left) Rear portal doors Side and rear underrun protection (right, left, rear) 2x crank landing gears Access ladder rear right Tool box left Tool box right Forklift accessible floor Steel ram buffers Multilock external frame ABS – Anti-lock Braking System EBS – Electronic Braking System ALB – Automatic Load Sensing System DIN EN 12642 Code XL certified Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Cargo area LxWxH: 13,561 x 2,480 x 3,003 mm External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm Clear loading height at rear portal: 2,785 mm Clear loading width at rear: 2,480 mm internal Tyres: 435/50R19.5 on ALCOA aluminium rims Tread depth left front: 7 mm Tread depth left middle: 10 mm Tread depth left rear: 5 mm Tread depth right front: 8 mm Tread depth right middle: 9 mm Tread depth right rear: 6 mm Additional equipment: Type: SD Suitable for tractor units (ISO 1726 restricted – chassis data needed!) King pin distance to centre of support device: approx. 2,720 mm Fifth wheel height unladen: approx. 985 mm Double-T main beams and centre beams with welded cross members and cantilevers Multilock external frame: universal load securing points every 100 mm Body height front: 80 mm (incl. floor and fifth wheel plate) 2" king pin Rear underrun protection according to EC directive Side underrun protection according to EC directive Sliding step ladder at rear Door retainers Two mechanical landing legs, 2 x 12 t, semicircular plate with base Single-sided operation of landing legs, front-right side 3 axles, each rated at 9,000 kg BPW axles, 19.5", air suspension (260 mm total stroke), disc brakes (ET 120) Brake disc diameter: 370 mm With lifting and lowering function incl. automatic ride height reset Load-dependent, fully automatic electronic lifting axle control for 1st and 3rd axles Manual function on control console for forced lift (start assist per Directive 97/27/EC) and forced lowering Attention: reduced ground clearance at lift axle area! Axle lift activation sequence: 3rd axle lifts first / lowers last Plastic mudguards Splash protection as per EC directive Hedpfxex E Ib Ho Aczspa Braking system as per ECE Regulation 13 (including vehicle stability function) Spring-loaded parking brake Brake air line connections at front approx. 675 mm above platform Diagnosis via ISO7638 connector (EBS power supply cable) Standard air connections ISO 1728 (Palm) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signalling system to ECE Regulation 48 2 x LED license plate lights 2 outline marker lights with rubber arms, LED version LED side marker lights with direction indicator function (blinking) Electrical connectors at front approx. 450 mm above platform 24 Volt, 7-pin socket at front DIN ISO 1185 7-pin socket at front DIN ISO 3731 for auxiliary functions Additional 15-pin socket at front DIN ISO 12098 Multifunction rear lamps Steel rear corner bumpers

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 29.804 κιλ, συνολικό βάρος: 36.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 10/2022, μήκος χώρου φόρτωσης: 13.620 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., ύψος χώρου φόρτωσης: 2.914 χιλ., συνολικό πλάτος: 2.550 χιλ., Εξοπλισμός: ABS, Krone SD Curtain Sider Mega Edscha Lifting Roof, 2x Lift Axles (1st + 3rd Axle), Multilock Outer Frame Permissible Total Weight: 36,000 kg Unladen Weight: 6,196 kg Payload: 29,804 kg Fifth Wheel Height Unladen: approx. 985 mm BPW Bergische Axles Lift Axle: 1st and 3rd axle Air Suspension Disc Brakes Edscha Sliding Roof Hydraulic Roof Lift with 500 mm total lift, can be adjusted independently at four corner posts Certified Strap Curtain, Sliding Curtain both right and left Portal Doors Underrun Protection right, left, and rear 2x Crank Landing Legs Hjdpfx Aoxwq Rfoczepa Access Ladder rear right Toolbox left 2x Toolbox right Forklift Capable Metal Bumper Buffers Multilock Outer Frame ABS, EBS, ALB DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading Area (LxWxH): 13,620 x 2,480 x 2,914 mm External Dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Clear Loading Height rear portal: 2,709 mm Clear Loading Width rear: 2,480 mm internal Tyres: 435/50R19.5 on ALCOA Alloy Rims Tread Depth (left front): 7 mm Tread Depth (left middle): 8 mm Tread Depth (left rear): 6 mm Tread Depth (right front): 7 mm Tread Depth (right middle): 8 mm Tread Depth (right rear): 6 mm Additional Equipment: Type: SD Suitable for Tractor Unit (limited by ISO 1726 – motor vehicle data required!) Distance King Pin to Centre of Landing Gear approx. 2,720 mm Fifth Wheel Height Unladen: approx. 985 mm Double-T longitudinal and central beams and outer frame welded with crossbeams and outriggers Multilock Outer Frame, universal load securing options every 100 mm Front frame height: 80 mm (incl. floor and fifth wheel plate) 2" King Pin Rear underrun protection device according to EC directive Side protection device according to EC directive Sliding step ladder rear Door retainer Two mechanical landing gears, 2 x 12 t, semi-circular base plates Operation of landing gears right side 3 axles, each with 9,000 kg load capacity BPW axles, 19.5", with air suspension (total lift 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With lifting and lowering function, incl. automatic ride height reset Load-dependent fully automatic electronic lift axle control for 1st axle Load-dependent fully automatic electronic lift axle control for 3rd axle Manual function at control panel for forced lifting (=start aid according to Directive 97/27/EC) and forced lowering via rotary switch Note: reduced ground clearance in the lift axle area! Lift axle switching sequence: 3rd axle lifts first / lowers last Plastic mudguards Splash guard according to EC directive Brake system according to ECE Regulation 13 (incl. vehicle stability function) Spring-loaded parking brake Brake line connectors at the front approx. 675 mm above platform Diagnostics via ISO7638 plug connection (EBS supply cable) Standard air connections ISO 1728 (palm couplings) Brake system manufacturer: Wabco EBS system 2S/2M, 2 sensors on one axle Lighting and signal system ECE R48 2 x LED number plate lights 2 marker lights with rubber arm, LED version LED side marker lights with directional indicator (blinker) Electrical cable connectors at the front approx. 450 mm above platform 24 Volt, 7-pin socket DIN ISO 1185 at front 7-pin socket DIN ISO 3731 at front for additional functions Also 15-pin socket DIN ISO 12098 at front Multifunction tail lights Steel corner bumpers at the rear