Ρυμουλκούμενο χαμηλού φορτίου

GOLDHOFER STHP 8 (3+5)/GG 219 to/Pendelachsen /ausziehbar

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3+5) 8 τεμάχια υδραυλικής κατευθυνόμενης μονάδας άξονα BWP και τηλεχειριστήριο. Τεχνικά δυνατή συνολική μάζα 219.000 kg Φορτίο 175.620 kg Υδραυλική ανάρτηση και 8 άξονες καθοδηγούμενοι, χαμηλόσαστρο Goldhofer τύπου STHP (3+5), αποτελούμενο από 4 βαρέως τύπου μονάδες, με αποσπώμενο λαιμόχησο, τηλεσκοπικό καρότσι εκσκαφέα μήκους έως 5 μ., με 4 θέσεις τροχών, ABS και τεχνικά εφικτό ωφέλιμο φορτίο έως 175.620 kg. Αποτελείται από τα παρακάτω 4 ξεχωριστά τμήματα βαρέως τύπου: 1ο τμήμα: Υδραυλικός καθολικός λαιμός τύπου STH Συνδυάζεται με βαρέως τύπου τρόλεϊ με γέφυρες φόρτωσης που μπορούν να διαβαθούν από όχημα. Ιδιοβάρος 5.900 kg Επιτρεπόμενο φορτίο πέμπτου τροχού εμπρός 35.000 kg Μήκος περ. 4,10 μ. Ύψος εδράνου περ. 1,30 μ. Κέντρική ακίδα 3,5'' Πλευρικά τοιχώματα αλουμινίου αφαιρούμενα Πλήρως υδραυλική κίνηση 2ο τμήμα Goldhofer THP/ST3 Τριαξωνικό πλαίσιο βαρέως τύπου Ως μονάδα τεχνικά δυνατή συνολική μάζα: 108.000 kg, τεχνικά δυνατά φορτία άξονα: 36.000 kg στα 5 km/h. Ιδιοβάρος: 10.350 kg Τεχνικά ωφέλιμο φορτίο ως μονάδα έως 97.650 kg στα 5 km/h. Υδραυλικοί εκκρεμές άξονες 8 φορές, ελαστικά 215/75/R17.5 Φορτίο άξονα: 25 τόνοι στα 20 km/h Πλάτος οχήματος: 3 μέτρα Απόσταση κέντρων: 1,5 μέτρο Μέγιστη γωνία διεύθυνσης: ±60° Υδρομηχανικό διπλού κυκλώματος σύστημα υποχρεωτικής διεύθυνσης ενσωματωμένο στο πλαίσιο με μέγιστη γωνία στρέψης ακτίνων άξονα 60°, ενσωματωμένη δεξαμενή λαδιού Εμπρός και πίσω βελτιστοποιημένος σύνδεσμος πλακών ακίδων για διαμήκεις συνδυασμούς Μονές εκκρεμές άξονες με 8 τροχούς ανά γραμμή άξονα Υδραυλική αντιστάθμιση άξονα +/- 300 mm, υδροπνευματική ανάρτηση με συσσωρευτή αερίου Υδραυλική διεύθυνση όλων των αξόνων Άξονες BPW με ταμπούρα και ABS, τεχνικά εφικτό φορτίο άξονα 34 τόνοι στα 5 km/h 3ο τμήμα: Χαμηλοσάστρα βαρέως τύπου - τηλεσκοπική γέφυρα εκσκαφέα Έτος κατασκευής: 2002 Εσωτερικές διαστάσεις: περ. 7,50 μ. μήκος, 3,00 μ. πλάτος, 0,40 μ. ύψος φορτώσεως Ύψος κατασκευής 350 mm Επεκτεινόμενο περ. 5,00 μ. Ιδιοβάρος 11.900 kg 4 θέσεις τροχών με προέκταση στην κεφαλή Kjdpoxx Evfjfx Aatodw Συνολικό ύψος στη θέση τροχών περ. 150 mm Φορτίο έως 80 τόνοι στη χαμηλοσάστρα και 175,6 τόνοι στο συνολικό σύνολο STHP 8 (3+5) Εμπρός και πίσω υδραυλικός σύνδεσμος πλακών με προσαρμογέα κλαβιέρας 4ο τμήμα: Goldhofer THP/ET5 πενταξονικό πλαίσιο βαρέως τύπου Πρώτη άδεια: 04.01.2002 Τεχνικά δυνατή συνολική μάζα: 115.000 kg, τεχνικά δυνατά φορτία άξονα: 23.000 kg στα 5 km/h Ιδιοβάρος: περ. 14.200 kg Τεχνικά ωφέλιμο φορτίο έως 100.800 kg δυνατό. Μονές υδραυλικές εκκρεμές άξονες με 4 τροχούς ανά γραμμή άξονα με ελαστικά 20 x 285/70 R 19.5 Υδραυλική αντιστάθμιση άξονα +/- 300 mm, υδροπνευματική ανάρτηση με αεριοσυσσωρευτή Υδραυλική διεύθυνση όλων των αξόνων Ασύρματο τηλεχειριστήριο για το σύστημα διεύθυνσης 5. Σημειώσεις: Με τα 4 βαρέως τύπου τμήματα, είναι δυνατοί έως και 3 διαφορετικοί συνδυασμοί συρμών! Τα ωφέλιμα φορτία διαφέρουν ανάλογα με τον συνδυασμό συρμού. Το χαμηλοσάστρα μπορεί να δοκιμαστεί στο χώρο μας. Διαθέσιμο πιστοποιητικό κατασκευαστή Goldhofer για τη συγκεκριμένη ειδική σύνθεση χαμηλοσάστρας. Τιμή καθαρή πλέον ΦΠΑ 19%. Όλες οι πληροφορίες χωρίς εγγύηση. Με επιφύλαξη σφαλμάτων και ενδεχόμενης προηγούμενης πώλησης. Εσωτερικός αριθμός οχήματος: 2285 Το πλήρες κείμενο της αγγελίας είναι επίσης διαθέσιμο στα γερμανικά.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low loader, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and an extendable excavator low bed up to 5 meters long with 4 wheel recesses, equipped with ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading decks. Unladen weight approx. 5,900 kg Admissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As single module, technical gross weight: 108,000 kg; technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x fitted with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis with integrated 2-circuit hydromechanical all-wheel forced steering, max. steering angle of pendle axles 60°, with integrated hydraulic oil tank Optimised pin-lug coupling front and rear for longitudinal combinations Single-tyre pendle axles with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable heavy-duty low bed module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m length, 3.00 m width, 0.40 m loading height Built height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with drive-on module at the head end Built height in wheel recess area approx. 150 mm Load up to 80 t in lowbed and 175.6 t as part of overall module STHP 8 (3+5) possible. Unladen weight: 11,900 kg Hydraulic pin-lug couplings front and rear with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tyre hydraulic pendle axle units with 4 wheels per axle line, 20x fitted with 285/70 R 19.5 tyres Hydraulic axle compensation +/-300 mm, hydropneumatic gas suspension Kdjdpoxwgngjfx Aatjw Hydraulic steering on all axles Remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with the 4 heavy-duty modules! Payloads change depending on combination. A current manufacturer's certificate from Goldhofer is available for the special low bed combination. The lowbed can be inspected/tested at our site. Price NET plus 19% VAT. All information subject to change. Errors and prior sale excepted. Internal vehicle number: 2285

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Kedpexcdf Hofx Aatedw Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Kdsdpsxcdg Dsfx Aatjw Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h Kdjdjxcdgqepfx Aatjw 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low loader, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and an extendable excavator low bed up to 5 meters long with 4 wheel recesses, equipped with ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading decks. Unladen weight approx. 5,900 kg Admissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As single module, technical gross weight: 108,000 kg; technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x fitted with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis with integrated 2-circuit hydromechanical all-wheel forced steering, max. steering angle of pendle axles 60°, with integrated hydraulic oil tank Optimised pin-lug coupling front and rear for longitudinal combinations Single-tyre pendle axles with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable heavy-duty low bed module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m length, 3.00 m width, 0.40 m loading height Built height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with drive-on module at the head end Built height in wheel recess area approx. 150 mm Load up to 80 t in lowbed and 175.6 t as part of overall module STHP 8 (3+5) possible. Unladen weight: 11,900 kg Hydraulic pin-lug couplings front and rear with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tyre hydraulic pendle axle units with 4 wheels per axle line, 20x fitted with 285/70 R 19.5 tyres Hydraulic axle compensation +/-300 mm, hydropneumatic gas suspension Hydraulic steering on all axles Remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with the 4 heavy-duty modules! Payloads change depending on combination. A current manufacturer's certificate from Goldhofer is available for the special low bed combination. The lowbed can be inspected/tested at our site. Price NET plus 19% VAT. All information subject to change. Errors and prior sale excepted. Kdodpfx Aaexcdf Tstow Internal vehicle number: 2285

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. Kdedpfx Asxcdfgeatjw A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low loader, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and an extendable excavator low bed up to 5 meters long with 4 wheel recesses, equipped with ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading decks. Unladen weight approx. 5,900 kg Admissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As single module, technical gross weight: 108,000 kg; technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x fitted with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis with integrated 2-circuit hydromechanical all-wheel forced steering, max. steering angle of pendle axles 60°, with integrated hydraulic oil tank Optimised pin-lug coupling front and rear for longitudinal combinations Single-tyre pendle axles with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable heavy-duty low bed module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m length, 3.00 m width, 0.40 m loading height Built height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with drive-on module at the head end Built height in wheel recess area approx. 150 mm Load up to 80 t in lowbed and 175.6 t as part of overall module STHP 8 (3+5) possible. Unladen weight: 11,900 kg Hydraulic pin-lug couplings front and rear with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tyre hydraulic pendle axle units with 4 wheels per axle line, 20x fitted with 285/70 R 19.5 tyres Hydraulic axle compensation +/-300 mm, hydropneumatic gas suspension Kdodpfjxcdfajx Aatjw Hydraulic steering on all axles Remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with the 4 heavy-duty modules! Payloads change depending on combination. A current manufacturer's certificate from Goldhofer is available for the special low bed combination. The lowbed can be inspected/tested at our site. Price NET plus 19% VAT. All information subject to change. Errors and prior sale excepted. Internal vehicle number: 2285