Ρυμουλκούμενο

GOLDHOFER STHP 8 (3+5)/GG 219 to/Pendelachsen/ausziehbar

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low loader, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and an extendable excavator low bed up to 5 meters long with 4 wheel recesses, equipped with ABS, technically possible payload up to 175,620 kg. Prjdpfsxcdf Hex Aazsc Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis, with drive-over loading decks. Unladen weight approx. 5,900 kg Admissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As single module, technical gross weight: 108,000 kg; technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x fitted with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis with integrated 2-circuit hydromechanical all-wheel forced steering, max. steering angle of pendle axles 60°, with integrated hydraulic oil tank Optimised pin-lug coupling front and rear for longitudinal combinations Single-tyre pendle axles with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable heavy-duty low bed module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m length, 3.00 m width, 0.40 m loading height Built height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with drive-on module at the head end Built height in wheel recess area approx. 150 mm Load up to 80 t in lowbed and 175.6 t as part of overall module STHP 8 (3+5) possible. Unladen weight: 11,900 kg Hydraulic pin-lug couplings front and rear with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tyre hydraulic pendle axle units with 4 wheels per axle line, 20x fitted with 285/70 R 19.5 tyres Hydraulic axle compensation +/-300 mm, hydropneumatic gas suspension Hydraulic steering on all axles Remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with the 4 heavy-duty modules! Payloads change depending on combination. A current manufacturer's certificate from Goldhofer is available for the special low bed combination. The lowbed can be inspected/tested at our site. Price NET plus 19% VAT. All information subject to change. Errors and prior sale excepted. Internal vehicle number: 2285

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendle axle units with remote control. Technical gross weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steerable Goldhofer low loader, type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and an extendable excavator low bed up to 5 meters long with 4 wheel recesses, equipped with ABS, technically possible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck, type STH / ST Year of manufacture: 2002 Pjdpfx Ajxcdg Dsazsrc Compatible with heavy-duty module chassis, with drive-over loading decks. Unladen weight approx. 5,900 kg Admissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin: 3.5" bolt Removable aluminium side walls Fully hydraulically movable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As single module, technical gross weight: 108,000 kg; technical axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendle axles, 24x fitted with tyres: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis with integrated 2-circuit hydromechanical all-wheel forced steering, max. steering angle of pendle axles 60°, with integrated hydraulic oil tank Optimised pin-lug coupling front and rear for longitudinal combinations Single-tyre pendle axles with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS, technically possible axle load 34 t at 5 km/h 3rd module: Extendable heavy-duty low bed module – excavator deck Year of manufacture: 2002 Internal dimensions approx. 7.50 m length, 3.00 m width, 0.40 m loading height Built height: 350 mm Extendable by approx. 5.00 m – telescopic 4 wheel recesses with drive-on module at the head end Built height in wheel recess area approx. 150 mm Load up to 80 t in lowbed and 175.6 t as part of overall module STHP 8 (3+5) possible. Unladen weight: 11,900 kg Hydraulic pin-lug couplings front and rear with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technical gross weight: 115,000 kg, technical axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tyre hydraulic pendle axle units with 4 wheels per axle line, 20x fitted with 285/70 R 19.5 tyres Hydraulic axle compensation +/-300 mm, hydropneumatic gas suspension Hydraulic steering on all axles Remote control for steering axles Notes: Up to 3 different tractor-trailer combinations possible with the 4 heavy-duty modules! Payloads change depending on combination. A current manufacturer's certificate from Goldhofer is available for the special low bed combination. The lowbed can be inspected/tested at our site. Price NET plus 19% VAT. All information subject to change. Errors and prior sale excepted. Internal vehicle number: 2285

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: Podpfx Aajxcdf Tszsrc 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Psdpfsxcdgqex Aazorc Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 175.620 κιλ, συνολικό βάρος: 219.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2002, Εξοπλισμός: ABS, STHP 8 (3 + 5) 8 hydraulic BPW pendulum axle modules with radio remote control. Gross technical weight possible: 219,000 kg Technical payload possible: 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5 meter extendable excavator low-bed deck with 4 wheel recesses and ABS, with a technically possible payload of up to 175,620 kg. Consisting of the following 4 separate heavy-duty module components: 1st Module: Hydraulic Universal Gooseneck Type STH / ST Year of manufacture: 2002 Compatible with heavy-duty module chassis and drivable loading bridges. Unladen weight approx. 5,900 kg Perm. front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" bolt Plug-in aluminum side boards Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-Axle Heavy Duty Chassis Module First registration: 14.11.2001 As a single module, gross technical weight possible: 108,000 kg; axle weights technically possible: 36,000 kg at 5 km/h Unladen weight: 10,350 kg As a single module, payload technically possible up to 97,650 kg at 5 km/h 8-fold hydraulic pendulum axles, fitted with 24 x 215/75/R17.5 tires Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Chassis-integrated hydromechanical dual-circuit all-wheel forced steering with maximum axle steering angle of 60° and integrated hydraulic oil tank Front and rear optimized pin-eye coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles BPW axles with drum brakes, ABS, and a technically possible axle load of 34 t at 5 km/h 3rd Module: Extendable Low-Bed Heavy Duty Module – Excavator Deck Year of manufacture: 2002 Internal dimensions approx.: 7.50 m length, 3.00 m width, 0.40 m loading height Construction height: 350 mm Extendable by approx. 5.00 m (telescopic) 4 wheel recesses with ramp module at the front end Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in the low-bed and up to 175.6 t in the STHP8 (3+5) overall module possible Unladen weight: 11,900 kg Front and rear hydraulic bolt-eye coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-Axle Heavy Duty Chassis Module First registration: 04.01.2002 Gross technical weight possible: 115,000 kg; axle weights technically possible: 23,000 kg at 5 km/h Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible Single-tire hydraulic pendulum axle units, 4 wheels per axle line, fitted with 20x 285/70 R 19.5 tires Prsdpfx Aaexcdfgjzjc Hydraulic axle compensation +/- 300 mm, hydropneumatic gas reservoir suspension Hydraulic steering on all axles Radio remote control for steering axles Notes: With these four heavy-duty modules, up to three different tractor unit combinations are possible! Payloads vary depending on the configuration. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed trailer can be tested at our facility. Price NET plus 19% VAT. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2285 The advertisement is also available in English.