Ανοιχτό ημιρυμουλκούμενο με μουσαμά

KÖGEL S24-1*Volumen* LiftA*Hubdach*

VIN: WK0S0002400300639

Permissible fifth wheel load: 12,000 kg
Permissible axle group load: 24,000 kg (8,000 kg per axle)
Technically possible axle group load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross vehicle weight: 39,000 kg
Technically possible gross vehicle weight: approx. 39,000 kg
Theoretical payload: approx. 29,478 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg
(A) Wheelbase: approx. 6,390 mm
(A1) Axle spacing: approx. 1,310 mm
(A2) Axle spacing: approx. 1,310 mm
(D) Overall length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Internal loading length: approx. 13,620 mm
(G) Internal loading width: approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
(H1) Unladen loading height in horizontal driving position: approx. 1,030 mm
(H2) Laden loading height in horizontal driving position: approx. 1,000 mm
(H3) Ramp height achievable at vehicle rear with fifth wheel height of 910 mm, loaded, raised: approx. 1,190 mm
Driving height set to 265 mm.
(K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable in 5x25 mm increments], rear approx. 2,810-2,860 mm [adjustable in 1x50 mm increments]
(K1) Internal height under roof: front approx. 2,875 mm - 3,000 mm [adjustable in 5x25 mm increments] | rear approx. 2,950 mm - 3,000 mm [adjustable in 1x50 mm increments]
(X1) Overall height unladen in horizontal driving position: = H1 + K + T +/- body height adjustment | = S +P + K+T+– height adjustment
Body settings: The construction design of the “Mega” body allows for a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (overall height, side through-loading height, internal height) vary according to the selected body setting.
(T) Roof build height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-wide height equals the specified internal height under roof.
(N) Front overhang (according to ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm
(O) Rear swing radius (according to ISO 1726): approx. 2,300 mm
Dedpfxeycphzo Afaeup
(P) Build height above fifth wheel: approx. 90 mm
(S) Possible fifth wheel height unladen: approx. 940 - 1,070 mm, level at approx. 940 mm (note overall height!)

Chassis
Standard ladder-type steel lightweight frame with inserted cross members.
Cover plate between outer frame and longitudinal member as tire guard for the tractor’s rear wheels.
8 mm thick coupling plate with 2” kingpin according to DIN 74080/ISO 337

Running gear
Axle lift mechanism on axle 1
Automatic, load-dependent axle lift control. Start assist: activation via braking 3x, 30% overload up to a speed of 25 km/h.
Three-axle SAF INTRADISC aggregate, with disc brakes Ø 370 mm, ET 120.
Air suspension with 260 mm travel

Chassis attachments
JOST landing gear, mechanical with compensating foot, 24 t lifting force. Single-sided operation, right side in direction of travel.
Side underrun protection according to ECE-R73
2 large plastic toolboxes, waterproof, dimensions (internal) approx. 923 x 422 x 460 mm. Fitted at the rear, 1 left and 1 right.
Telescopic access ladder rear right.
Low, rigid rear underrun protection made of steel according to ECE-R58
Height of underrun protection profile min. 120 mm, designed for increased test forces.

Brake/Air suspension system
WABCO EBS system
Air suspension system incl. 1 lift and lower valve, mounted on the left in the direction of travel be

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.