Ημιρυμουλκούμενο

Wiese Baustoffauflieger mit Fassi Kran F240

Wiese Building Materials Semi-Trailer

King Pin Load: 12,000 kg
Axle Load: 27,000 kg
Gross Vehicle Weight: 39,000 kg
Unladen Weight: 10,840 kg
Loading Platform Length: approx. 9,200 mm
Overall Length: approx. 10,600 mm
Internal Width: 2,480 mm
Overall Width: 2,550 mm

King Pin
1 position with 2" king pin
Coupling Height
In horizontal position approx. 1,160 mm
Top Edge of Main Beam (without floor)
Approx. 1,380 mm
Loading Height:
Approx. 1,410 mm

Lashing Ring Outer Frame D = 30 mm with perforated strip on the slope (160 mm high/30 mm floor recess/4 mm wall thickness),
Main Beam Spacing
980 mm (center/center) - 1,130 mm (outer/outer)
Axles
3 axles, each with 9,000 kg load capacity
Make: SAF with disc brakes D = 430 mm
Track Width: 2,040 mm
ABS: 1 axle with sensor
Axle Spacing: approx. 1,510 mm / approx. 1,510 mm
Suspension
Original SAF air suspension with lift-lower valve
with safety cables
Axle Lift
Axle lift on 1st axle, automatic load-dependent for start-up assistance
Switchable from driver's cab with button
Steering
Mechanical forced steering on axles 2 and 3
Double rod steering / Manufacturer: Tridec

Brake System
2-line Wabco compressed air brake system according to EU regulations 71/320/EEC and following with:
EBS/ABS 2S/2M with RSS function (Roll Stability Support)
and 7-pin socket
1x ISO yellow coupling head
1x ISO red coupling head
Spring-loaded parking brake on 2 axles
All connections equipped with quick couplings
Aluminum air tanks

Air System
Compressed air installation with:
1x lift/lower valve
1x height control valve
Aluminum air tanks
All connections equipped with quick couplings
Automatic lowering of air suspension during crane operation

Tyres
6 pieces, type: 385/65 R22.5"
Brand: Manufacturer's choice
Tyre pressure monitoring system on all 6 tyres, with display in the driver's cab

Wheels
6x steel rims 11.75x22.5", 10-hole, hub-centered, offset: 120 mm

Support Device
Mechanical landing legs with T-pendulum foot, permissible lifting capacity: 2x 12,000 kg
Operable from one side, 2 speeds
Brand: Manufacturer's choice

Mudguards + Splash Flaps
6x plastic half-shell mudguards
Fender mounting reinforced with flat steel
Note: Mudguard on steering axle 3 with cut-out on inside

Lighting System
24V lighting system according to EU regulations 76/756/EEC and following, with:
2x multi-chamber tail lights
Lane-keeping lights
License plate illumination
LED side marker lights with indicator function
2x 7-pin and 1x 15-pin sockets according to EU standard
Rear lights mounted in a reinforced light carrier = tested rear underrun protection
All necessary markings
Additional installation:
Electrical connection for crane control prepared as specified!

Safety Equipment
Side underrun protection and rear underrun protection made of aluminium according to EU regulations

Floor
OKULEN floor, 32 mm

Superstructure
Straight front wall, 1,200 mm high, permanently welded,
Fjdpeyihg Hjfx Aglopc
consisting of 4 steel profiles,
welded to the front panel with aluminium hollow profile as infill
Inside with wear plate, 625 mm high, galvanised steel
Both sides with Kinnegrip stanchions K20/1,100 mm high for clear through-loading
Straight rear wall, 1,100 mm high, permanently welded, consisting
of 4 steel profiles, welded to the rear panel and aluminium hollow profile as infill
Inside with wear plate, 625 mm high, galvanised steel
Both sides with Kinnegrip stanchions K20/1,100 mm high for clear through-loading
2x3 aluminium side walls, 1,100 mm, folding and lowerable
In the r

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.