Ανοιχτό ημιρυμουλκούμενο με μουσαμά

KÖGEL MEGA Hubdach, Vario FIX, 1. Liftachse

Kögel MEGA S24 MEGA, lift axle (1st axle lift), lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop rails left and right, sliding curtain sides, sliding roof cover, toolbox, first owner, as new condition.

Permissible kingpin load: 12,000 kg
Technically possible kingpin load: approx. 12,000 kg
Permissible aggregate axle load: 24,000 kg (8,000 kg per axle)
Technically possible aggregate axle load: approx. 27,000 kg (9,000 kg per axle)
Permissible gross weight: 36,000 kg
Technically possible gross weight: approx. 39,000 kg
Curb weight (standard equipment): approx. 6,130 kg
Curb weight (custom configuration): approx. 6,582 kg
Theoretical payload: approx. 29,418 kg
Floor load capacity according to DIN EN 283 with test axle load 7,200 kg

(A) Wheelbase: approx. 6,390 mm
(A1) Axle distance: approx. 1,310 mm
(A2) Axle distance: approx. 1,310 mm
(D) Total length: approx. 13,950 mm
(E) Overall width: approx. 2,550 mm
(F) Loading area length (internal): approx. 13,620 mm
(G) Loading area width (internal): approx. 2,480 mm
(G2) Rear through-loading width: approx. 2,480 mm
Tire size: 445/45R19.5
(H1) Loading height unladen in travel position (level): approx. 1,020 mm
(H2) Loading height laden in travel position (level): approx. 990 mm
(H3) Achievable ramp height at rear under loaded conditions at a coupling height of 910 mm, raised: approx. 1,200 mm
Driving height set to 265 mm
(K) Side through-loading height (internal): front approx. 2,735 mm - 2,860 mm [adjustable in 5 x 25 mm steps], rear approx. 2,810 - 2,860 mm [adjustable in 1 x 50 mm steps]
(K1) Interior height under the roof: front approx. 2,875 mm - 3,000 mm [adjustable in 5 x 25 mm steps], rear approx. 2,950 mm - 3,000 mm [adjustable in 1 x 50 mm steps]
(X1) Overall height unladen in travel position (level): = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment
(X2) Overall height laden in travel position (level): = H2 + K + T +/- body height adjustment
Body settings: The design of the "Mega" body allows for height adjustment: 5 x 25 mm at the front and 1 x 50 mm at the rear. The relevant heights (overall height, side through-loading height, interior height) change according to the selected body setting.

(T) Roof build height at sides: approx. 180 mm. Due to the design of the roof girder, the pallet-width interior height corresponds to the specified interior height under the roof.
(N) Front overhang (acc. ISO 1726): approx. 1,685 mm
(N1) Front overhang radius (acc. ISO 1726): approx. 2,040 mm
(O) Rear swing clearance (acc. ISO 1726): approx. 2,300 mm
(P) Build height above fifth wheel: approx. 90 mm
(S) Possible fifth wheel coupling height unladen: approx. 930 – 1,060 mm, level at approx. 930 mm (consider total height!)
Braking system according to ECE-R13
Electrical system according to ECE-R48
Ppodoy Ifw Dspfx Amyor
Wabco brakes, air suspension
BPW three-axle ECO Air unit with disc brakes Ø 370 mm, ET 120, air suspension with 260 mm stroke
Six 445/45 R 19.5 tires
Steel pallet stop rails with VarioFix hole pattern (bolted) on left and right in direction of travel
VarioFix steel outer frame with 3 pairs of stanchion pockets
Mechanical/hydraulic lifting device, lifting height from lowest position approx. 500 mm/600 mm, 4 operating levers located at each corner post. Complies with occupational safety directive BGV D 29. (Lifting roof can only be operated with doors open!)
Load securing certificate according to EN 12642 XL (VDI 2700). For road transport only.
Daimler load secur

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.