Ανοιχτό ημιρυμουλκούμενο με μουσαμά

WEB-TRAILER 1-Achs-City-Sattelauflieger TRI LBW

PRSSQTri 09-SYS with body, 1-axle, LBW
Twin tires 22.5 TRIDEC
----

Curtainsider body, side height 2600 mm from loading area to
lower edge of outer beam
Steering angle maximum 31°
Mechanical steering system with 1 drawbar for steering one axle
Make: Tridec

Chassis width approx. 2480 mm
Fifth wheel load max. approx. 12000 kg
Landing gear position approx. 2300 from kingpin
Chassis length approx. 13620 mm
Axle loads: 10 000 kg
Riding height unloaded approx. 1300 mm with fifth wheel height 1150 mm
Approval with COC papers

*Outer frame height approx. 125 mm, with groove for lashing eyes, base thickness approx. 4 mm, with Lashing holes on the outside
13 pairs of lashing eyes in the outer frame
(tested lashing force 5t per lashing point)
24 ton telescopic support winch

Axle
Free choice of axle make by WEB Trailers (SAF/BPW/Jost)
Axle with large disc brake
Axle 10t disc 22.5" twin tires

Air suspension unit 10 t each
Lifting and lowering device
Coupling head red and yellow
Lifting and lowering device mounted on the right rear in the direction of travel
Air tank 2 x approx. 80 l in steel, painted black
EBS braking system made by Knorr or Wabco including RSS

4 branded tires 275/70 R 22.5 branded on steel wheel (branded according to WEB Trailer's choice)

Tire pressure control

Tail lift
Platform with roll-off protection
Platform steel - tear plate
Plug connection at the front for LBW as Rema socket (without Batteries! opt.)
Tail lift of our choice 2.5t
Documentation, manual etc.
Operation via control in the box at the back right and remote control
with spiral flex cable in the structure at the top right
Platform height approx. 2000mm (standard lockable at the back)
Indicating lights on the tail lift platform
Safety and reverse polarity protection on positive and negative lines (red+blue)
Make of tail lift of choice WEB Trailer
Construction certificate according to DIN EN 12642 XL (with 27t payload + tail lift) with at least 2 rows of wooden slats and locking on the platform at the top
Contour marking on tarpaulins and rear portal
ECE signs on tail lift
Position lights at the top rear in red (LED)
Sliding roof fixed at the rear
Top flap for tail lift with gas pressure damper
Position lights at the top and bottom front in white with reflex (LED)
3 sets of side sliding stanchions manufacturer of choice WEB
Front wall steel Standard with 400mm steel cassettes
inside wear plate approx./max. 2.40m
3 rows of wooden slats

Lighting system 24 volts with small multifunctional light
15-pin plug
flashing SML

Roof tarpaulin reinforced version with 12x12 roof fabric
Tensioning ratchet at the rear, only release device at the front
Gisleg Dkyqohcdw Njw
2 steel impact buffers at the rear corners
Plastic fender, 180 degrees
Anti-spray mud flaps
Side collision protection on both sides, steel profile or plastic

Construction certificate according to DIN EN 12642 XL

Coating/painting:

Painting of the chassis in RAL 9005 or Nova Grey 7350 other colors at an additional cost only if the color is available in powder

KTL coating with zinc phosphating plus powder, highest corrosion protection

Hot-dip galvanizing optionally possible

Approval:

COC

Price ex works

Attention!!!
Pictures show special equipment

Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can accommodate your wishes! Ask us - we will be happy to make you an offer.

Errors and prior sale reserved!

Η διαφήμιση μεταφράστηκε αυτόματα και ενδέχεται να περιέχει ορισμένα σφάλματα μετάφρασης.