Μεταχειρισμένο Müller-Mitteltal Tp 24,0 3 Achs Jumbo Prischen 9,40 M, Wenig Benutzt προς πώληση (57.988)

Κατάσταση: μεταχειρισμένο, κενό βάρος: 5.300 κιλ, μέγιστο βάρος φόρτωσης: 18.700 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 11/2014, μήκος χώρου φόρτωσης: 9.400 χιλ., ανάρτηση: ατσάλι, μέγεθος ελαστικού: 205/65R17,5, χρώμα: άλλο, τύπος μετάδοσης: άλλο, διάσταση εμπρόσθιου ελαστικού: 205/65R17,5, μέγεθος πίσω ελαστικού: 205/65R17,5, καμπίνα οδηγού: άλλο, κατηγορία εκπομπών: κανένα, Εξοπλισμός: ABS, πνευματικό φρένο, Ύψος φόρτωσης περίπου 900 χιλ., μήκος επιφάνειας φόρτωσης περίπου 9.400 χιλ., άγκιστρα πρόσδεσης, -- ενδέχεται να υπάρχουν τυπογραφικά λάθη, σφάλματα και αλλαγές, οι φωτογραφίες είναι ενδεικτικές --, περισσότερες πληροφορίες στη διεύθυνση: !, Περισσότερες λεπτομέρειες: ! Bdsdpfx Aezx Rgvepqeg

Κατάσταση: μεταχειρισμένο, κενό βάρος: 8.620 κιλ, μέγιστο βάρος φόρτωσης: 36.380 κιλ, συνολικό βάρος: 45.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 07/2024, μήκος χώρου φόρτωσης: 13.550 χιλ., ανάρτηση: αέρας, μέγεθος ελαστικού: 445/45R19,5 160J, χρώμα: άλλο, τύπος μετάδοσης: άλλο, διάσταση εμπρόσθιου ελαστικού: 445/45R19,5 160J, μέγεθος πίσω ελαστικού: 445/45R19,5 160J, καμπίνα οδηγού: άλλο, κατηγορία εκπομπών: κανένα, Εξοπλισμός: ABS, πνευματικό φρένο, Λίγη χρήση, ύψος φόρτωσης περίπου 990 χιλ., 12 άγκιστρα ασφάλισης κοντέινερ, για 1 κοντέινερ 20 ποδών ή 2 κοντέινερ 20 ποδών ή 1 κοντέινερ 40 ποδών, επιπλέον χρέωση για ράμπες 1.000 €, -- Εκτυπωτικά λάθη, σφάλματα και αλλαγές υπόκεινται σε τροποποίηση, ενδεικτικές φωτογραφίες --, περισσότερες πληροφορίες στη διεύθυνση: !, Περισσότερες λεπτομέρειες: ! Bdodpszx Rgpsfx Apqjg

Κατάσταση: μεταχειρισμένο, κενό βάρος: 7.340 κιλ, μέγιστο βάρος φόρτωσης: 22.660 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 05/2012, μήκος χώρου φόρτωσης: 9.200 χιλ., ανάρτηση: ατσάλι, μέγεθος ελαστικού: 235/75 R 17,5, χρώμα: άλλο, τύπος μετάδοσης: άλλο, διάσταση εμπρόσθιου ελαστικού: 235/75 R 17,5, μέγεθος πίσω ελαστικού: 235/75 R 17,5, καμπίνα οδηγού: άλλο, κατηγορία εκπομπών: κανένα, Εξοπλισμός: ABS, πνευματικό φρένο, Μήκος επιφάνειας φόρτωσης περίπου 9.200 mm, ύψος φόρτωσης περίπου 900 mm, 16 σημεία πρόσδεσης, το όχημα πωλείται κατόπιν παραγγελίας, επιφυλάσσεται για τυπογραφικά λάθη, σφάλματα και αλλαγές, ενδεικτικές εικόνες. Περισσότερα στοιχεία στη διεύθυνση: !, More Details: ! Bdodpfozx S T Rsx Apqsg

Κατάσταση: μεταχειρισμένο, κενό βάρος: 7.340 κιλ, μέγιστο βάρος φόρτωσης: 22.660 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 05/2012, μήκος χώρου φόρτωσης: 9.200 χιλ., ανάρτηση: ατσάλι, μέγεθος ελαστικού: 235/75 R 17,5, χρώμα: άλλο, τύπος μετάδοσης: άλλο, διάσταση εμπρόσθιου ελαστικού: 235/75 R 17,5, μέγεθος πίσω ελαστικού: 235/75 R 17,5, καμπίνα οδηγού: άλλο, κατηγορία εκπομπών: κανένα, Εξοπλισμός: ABS, πνευματικό φρένο, Μήκος επιφάνειας φόρτωσης περίπου 9.200 mm, ύψος φόρτωσης περίπου 900 mm, 16 σημεία πρόσδεσης, το όχημα πωλείται κατόπιν παραγγελίας, επιφυλάσσεται για τυπογραφικά λάθη, σφάλματα και αλλαγές, ενδεικτικές εικόνες. Περισσότερα στοιχεία στη διεύθυνση: !, More Details: ! Bdjdezx Rhaopfx Apqeg

Κατάσταση: μεταχειρισμένο, κενό βάρος: 5.750 κιλ, μέγιστο βάρος φόρτωσης: 24.250 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/1993, ανάρτηση: ατσάλι, μέγεθος ελαστικού: 235/75R17,5 141/140J, χρώμα: άλλο, τύπος μετάδοσης: άλλο, διάσταση εμπρόσθιου ελαστικού: 235/75R17,5 141/140J, μέγεθος πίσω ελαστικού: 235/75R17,5 141/140J, καμπίνα οδηγού: άλλο, κατηγορία εκπομπών: κανένα, Εξοπλισμός: ABS, πνευματικό φρένο, Όχημα πελάτη, -- Τυπογραφικά λάθη, σφάλματα και αλλαγές επιφυλάσσονται, ενδεικτικές εικόνες --, Περισσότερα δεδομένα στο: !, Περισσότερες λεπτομέρειες: ! Bdodpfjzx Tc Hjx Apqsg

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 23.180 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 03/2019, μήκος χώρου φόρτωσης: 8.300 χιλ., πλάτος χώρου φόρτωσης: 2.500 χιλ., ύψος χώρου φόρτωσης: 900 χιλ., συνολικό μήκος: 10.805 χιλ., συνολικό πλάτος: 2.550 χιλ., Συνολικό βάρος: 24.000 kg / 30.000 kg Βάρος χωρίς φορτίο: 6.820 kg Ωφέλιμο φορτίο: 17.180 kg / 23.180 kg Συνολικό μήκος: 10.805 mm Μήκος χώρου φόρτωσης: Συνολικά περίπου 8.300 mm / περίπου 6.500 mm, συμπεριλαμβανομένης της χαμηλής πλατφόρμας και του οπίσθιου προστατευτικού Πλάτος: 2.550 mm Ύψος χώρου φόρτωσης: 900 mm Περισσότερες πληροφορίες: Εσοχές τροχών Ράμπες ανάρτησης Πλευρικές ράμπες με δυνατότητα οριζόντιας μετακίνησης Περιστρεφόμενος προβολέας Bodozwkkrspfx Apqsdg Προειδοποιητικές πινακίδες μπροστά και πίσω Διπλοί τροχοί Άξονες BPW Πλαστικό κιβώτιο εργαλείων Αναδιπλούμενη οπίσθια υποστήριξη Εσοχή για το βραχίονα εκσκαφέα, περίπου 2.400 mm x 800 mm Μεγάλο σετ ιμάντων πρόσδεσης Δακτύλιοι πρόσδεσης στον εξωτερικό σκελετό Αποθηκευτικός χώρος στην καμπύλη

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.500 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.380 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * Προφίλ PT 30: ----Φρένα: * EBS (ηλεκτρονικό σύστημα πέδησης) * Σύστημα έκτακτης απεμπλοκής για κύλινδρο πνευματικής αποθήκευσης * Ταμπουροφρένα ----Άξονες: * 3 άξονες Gigant των 11 τόνων ----Ανάρτηση: * Πνευματική ανάρτηση με σύστημα ανύψωσης και κάθοδοσης καθώς και βαλβίδα RtR ----Σύστημα σύζευξης: Bsdpfx Apsxptn Reqjdg * Σύστημα σύζευξης μήκους 1.200 mm με γλώσσα σύζευξης 40 mm και ρύθμιση ύψους μέσω ελατηρίου και κλειδαριάς ----Ηλεκτρικό σύστημα / Φωτισμός: * Smart-Board τοποθετημένο στο ρυμουλκούμενο ως εργαλείο πληροφόρησης (για την ένδειξη του φορτίου στους άξονες - διαχωρισμένη μπροστά και πίσω) * Έλεγχος πίεσης ελαστικών με δυνατότητα εμφάνισης στην καμπίνα του φορτηγού μέσω σήματος EBS, χωρίς εγκατάσταση στην πλευρά του φορτηγού * Ηλεκτρική σύνδεση 15 ακίδων * Φωτισμός LED 12 / 24 V * Περιστρεφόμενος προβολέας LED (αποσπώμενος) στο πίσω μέρος ----Γενικά εξαρτήματα: * Πλαϊνή προστατευτική μπάρα * Στηρίγματα ανύψωσης στο πίσω μέρος του πλαισίου * Μηχανικά ρυθμιζόμενες πινακίδες προειδοποίησης μπροστά και πίσω * Μπροστινό πλαστικό τέταρτο φτερό με προστασία από πιτσιλίσματα * Πίσω ίσια γαλβανισμένη ατσάλινη προστατευτική ποδιά με προστασία από πιτσιλίσματα * Εργαλειοθήκη από γαλβανισμένο ατσάλι περίπου 650 x 300 x 600 mm, βαμμένη με μαύρη επίστρωση πούδρας, στο δεξί πλάι * Κουτί στο πλαίσιο του άρματος για εξαρτήματα με ανοιγόμενο κάλυμμα, 2 τεμ. σταθερά ενσωματωμένες κλειδαριές (απευθείας μετά την πλατφόρμα του άρματος) * 2 τεμ. σκαλοπάτια, γαλβανισμένα, στο πλαίσιο του άρματος, αριστερά και δεξιά ----Επιφάνεια χαμηλού φορτωτή: * ΑΝΤΙΟΛΙΣΘΗΤΙΚΗ επιφάνεια συγκολλημένη με ρομπότ στην ατσάλινη πλάκα της πλατφόρμας του άρματος (εξέχοντα σημεία συγκόλλησης) ----Ασφάλιση φορτίου (πακέτο La-Si, το οποίο αποτελείται από): * 2 δακτύλιοι πρόσδεσης (13,4 τόνοι) μπροστά αριστερά και δεξιά στην πλευρική δοκό * 1 ζεύγος δακτυλίων πρόσδεσης UVV (13,4 τόνοι) μπροστά και πίσω, καθώς και 3 ζεύγη δακτυλίων πρόσδεσης UVV (10 τόνοι) στο πλάι, κάθε ένα από τα οποία μπορεί να περιστρέφεται και να ρυθμίζεται σε ύψος, ικανός να αντέξει φορτίο προς όλες τις κατευθύνσεις και ενσωματωμένος στο εξωτερικό πλαίσιο * 3 τσέπες για ιμάντες πρόσδεσης στο πλάι, με ταυτόχρονη δυνατότητα πρόσδεσης 2 τόνων * Ράβδος πρόσδεσης Profifix κατά μήκος του κεντρικού άξονα, στην επίπεδη περιοχή, για δυνατότητα πρόσδεσης έως LC 3000 daN ----Επέκταση: * 6 ζεύγη μηχανικών αναδιπλούμενων βραχιόνων για συνολικό πλάτος 3 μέτρων (ωστόσο, όχι στην κλίση στο πίσω μέρος) * Επεκτεινόμενες πλάκες στο κέντρο της επιφάνειας φόρτωσης ----Ράμπες: * Υδραυλικές, μονοκόμματες ράμπες περίπου 3.000 x 720 mm * Μηχανικά ρυθμιζόμενες στο πλάι * Μονάδα ελέγχου 4 διακλαδώσεων για μελλοντική προσθήκη υδραυλικής μετατόπισης ράμπας ----Θέση σκαπτικής βέργας: * Θέση σκαπτικής βέργας πάνω από τον πίσω άξονα, που εκτείνεται μέχρι την τελική δοκό (συνολικό μήκος περίπου 2.100 mm) * 2 ζεύγη δακτυλίων πρόσδεσης LC 6400 daN στη θέση σκαπτικής βέργας, στο πλάι, στο κεντρικό πλαίσιο ----Ύψος φόρτωσης: * Φορτωμένο, περίπου 910 mm +/- 20 mm, πνευματική ανάρτηση ----Βαφή: * Πλαίσιο, πλαίσιο άρματος, αναδιπλούμενοι βραχίονες, στηρίγματα ανύψωσης και ράμπες, θερμικά γαλβανισμένα * Άξονες, δακτύλιος στροφής, δεξαμενή αέρα, γλώσσα σύζευξης βαμμένα σε σκούρο χρώμα ----Πληροφορίες: * Νέο όχημα με εγγύηση κατασκευαστή * Λάθη και ενδιάμεσες πωλήσεις υπό όρους ----Χρόνος παράδοσης: * Παραδοτέο από περίπου την εβδομάδα 45/2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.940 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.460 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * T3 Profi 30.0 ----Brake system: * EBS braking system * Emergency release device for spring actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical load equalizer at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED rear lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Stainless steel front mudguards (closed design) and straight galvanized steel rear splash guards, both with spray protection * Toolbox made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Hinged cover (hot-dip galvanized) for the toolbox in the bogie platform * Four stake pockets on each side (stakes not included) with simultaneous lashing options ----Load securing (la-si package consists of): * 2 lashing rings (6.4 t) front left & right on the main frame of the bogie platform * 6 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame * Load capacity in the corners 13.4 t, otherwise 10 t ----Widening: Bsdpfxel Th I Ae Apqsdg * 6 pairs of mechanical folding outriggers for 3 m total width (not on the rear slope) * Extension planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for optional retrofitting of hydraulic side shifting ----Loading platform: * Over turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * approx. 5,980 kg unladen weight ----Paint finish: * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black ----Information: * Permissible gross weight up to 30,000 kg technically possible * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex works Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.500 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.380 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * Προφίλ PT 30: ----Φρένα: * EBS (ηλεκτρονικό σύστημα πέδησης) * Σύστημα απελευθέρωσης έκτακτης ανάγκης για κύλινδρο αεροσυσσωρευτή * Ταμπουροφρένα ----Άξονες: * 3 άξονες Gigant, χωρητικότητας 11 τόνων ----Ανάρτηση: * Πνευματική ανάρτηση με σύστημα ανύψωσης και χαμηλώματος, καθώς και βαλβίδα RtR ----Σύστημα σύνδεσης: Bedpfx Ajtplwispqodg * Σύστημα σύνδεσης μήκους 1.200 mm με άξονα σύνδεσης 40 mm και ρύθμιση ύψους μέσω ελατηρίου και μάνταλου ασφάλισης ----Ηλεκτρικό σύστημα / Φωτισμός: * Έξυπνος πίνακας ελέγχου (Smart-Board) τοποθετημένος στο ρυμουλκούμενο ως εργαλείο ενημέρωσης (για την εμφάνιση του φορτίου ανά άξονα – διαχωρισμός μπροστά και πίσω) * Σύστημα παρακολούθησης πίεσης ελαστικών με δυνατότητα εμφάνισης στο φορτηγό μέσω σήματος EBS, χωρίς να απαιτείται εγκατάσταση στην πλευρά του φορτηγού * Ηλεκτρική πρίζα 15 ακίδων * Φωτισμός LED 12 / 24 V * Περιστρεφόμενος φάρος LED (αποσπώμενος) στο πίσω μέρος ----Γενικά εξαρτήματα: * Πλευρική προστασία από πρόσκρουση * Στηρίγματα στήριξης στο πίσω μέρος του πλαισίου * Μηχανικά ρυθμιζόμενες πινακίδες προειδοποίησης μπροστά και πίσω * Πλαστικό προστατευτικό φτερού μπροστά * Ευθεία χαλύβδινη ποδιά πίσω με προστασία από πιτσιλίσματα * Εργαλειοθήκη από γαλβανισμένο χάλυβα, περίπου 650 x 300 x 600 mm, με μαύρη επίστρωση πούδρας, στο δεξί πλευρό * Κουτί στο πλαίσιο του άξονα για εξαρτήματα, με ανοιγόμενο καπάκι, 2 σταθερά ενσωματωμένα κλειδώματα (ακριβώς πίσω από την πλατφόρμα του άξονα) * 2 σκαλοπάτια γαλβανισμένα στο πλαίσιο του άξονα, αριστερά και δεξιά ----Επιφάνεια χαμηλού φορτωτή (low loader): * Επίστρωση ANTI-ολίσθησης, συγκολλημένη ρομποτικά, πάνω στην χαλύβδινη πλάκα της πλατφόρμας του άξονα (με προεξέχουσες ραφές συγκόλλησης) ----Ασφάλιση φορτίου (πακέτο La-Si, που αποτελείται από): * 2 άγκιστρα πρόσδεσης (χωρητικότητας 13,4 τόνων) μπροστά, αριστερά και δεξιά στην οριζόντια δοκό της μπροστινής πλευράς * 1 ζεύγος δακτυλίων πρόσδεσης UVV (χωρητικότητας 13,4 τόνων) μπροστά και πίσω, καθώς και από κάθε πλευρά 3 ζεύγη δακτυλίων πρόσδεσης UVV (χωρητικότητας 10 τόνων), αναδιπλούμενοι και ρυθμιζόμενοι σε ύψος, ανθεκτικοί σε όλες τις κατευθύνσεις και ενσωματωμένοι στο εξωτερικό πλαίσιο * Από κάθε πλευρά 3 θήκες για ιμάντες, με ταυτόχρονη δυνατότητα πρόσδεσης 2 τόνων * Ράβδος πρόσδεσης Profifix κατά μήκος του κεντρικού άξονα, στην επίπεδη περιοχή για δυνατότητα πρόσδεσης έως LC 3000 daN ----Επέκταση: * 6 ζεύγη μηχανικών αναδιπλούμενων βραχιόνων για συνολικό πλάτος 3 μέτρων (όχι στην πίσω κλίση) * Επεκτεινόμενες σανίδες στην μέση της επιφάνειας φόρτωσης ----Ράμπες: * Υδραυλικές, μονοκομματικές ράμπες, περίπου 3.000 x 720 mm * Μηχανικά ρυθμιζόμενες πλευρικά * Μπλοκ ελέγχου 4 θέσεων για μελλοντική αναβάθμιση με υδραυλική μετακίνηση των ραμπών ----Θήκη για μπουμ μπαγκέτας: * Θήκη για μπουμ μπαγκέτας πάνω από τον πίσω άξονα, συνεχόμενη έως την τελική δοκό (συνολικό μήκος περίπου 2.100 mm) * 2 ζεύγη αγκίστρων πρόσδεσης LC 6400 daN στη θήκη για μπουμ μπαγκέτας, πλευρικά στο μήκος του πλαισίου ----Ύψος φόρτωσης: * φορτωμένο, περίπου 910 mm +/- 20 mm (πνευματική ανάρτηση) ----Βαφή: * Πλαίσιο, πλαίσιο άξονα, αναδιπλούμενοι βραχίονες, στηρίγματα, καθώς και ράμπες, θερμικά γαλβανισμένα * Άξονες, περιστρεφόμενος δακτύλιος, δοχείο αέρα, άξονας σύνδεσης βαμμένο σε μαύρο χρώμα ----Πληροφορίες: * Καινούργιο όχημα με εγγύηση κατασκευαστή * Λάθη και ενδιάμεση πώληση επιφυλάσσονται ----Χρόνος παράδοσης: * διαθέσιμο από περίπου την 45η εβδομάδα του 2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.390 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes switched to the first axle via EBS (no installation required on the truck side) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting operated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system as well as Return-to-Ride (RtR) valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) ----General attachments: * Side underrun protection * Landing gears at the front and swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low loader platform: * 2nd kingpin position * Saddle platform with 45° chamfered front corners and toolbox at the front made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding cover * 400 mm high side aluminum drop sides (RAL color of your choice) on the saddle platform, foldable and removable * Rear wall -150 mm- inserted * Rear bevel on the saddle platform to the low bed approx. 700 mm long with checker plate covering and at the end a perforated strip for hooking in aluminum approach ramps * Saddle platform with 50 mm clamped wooden planks, low loader platform with 60 mm clamped wooden planks * Checker plate above the axles * 9 x mechanical folding extensions up to 3 m total width, but not in the rear bevel (extension boards available with closed storage compartment transverse to the driving direction under the loading area) * 3 storage shafts under the saddle platform for storing either aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi package): Saddle platform: * Perforated outer frame bent 45° with hole pattern for lashing points (2 t lashing force per lashing point with a minimum distance of 480 mm) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the saddle platform, 1 x on the longitudinal beams after the stepped section, and 1 x above the middle axle next to the longitudinal beam) Low loader platform: Bjdjq Euakopfx Apqsdg * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the stepped section of the saddle platform, 1 x at the start of the ramp slope, 1 x at the end of the ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator arm storage: * Extended excavator arm storage from the end of the last rigid axle over the steering axle up to the end c

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 17.650 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.230 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TP 30.0 with 3 cable drum mounts ----Brake System: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering device ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation - * 15-pin electrical connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General attachments: * Aluminum air reservoir * Stainless steel toolbox on the side approx. 1,000 x 300 x 600 mm * Side underride protection * Plastic quarter mudguards * Rear underride guard ----Flatbed platform: * Zurr-fix outer frame, angled at 45°, with holes for lashing equipment; lashing capacity per lashing point 2,000 kg at a spacing of 480 mm * Option for installing 3,000 kg drop lashing brackets at intervals of approx. 600 mm – each side is supplied with 12 pieces of 3,000 kg lashing brackets * Each side with 5 pockets for stake posts 100 x 50 mm in the outer frame – stake posts are not included in delivery * 30 mm phenolic plywood floor ----Drum mounts: Bjdpfxex Nli Ne Apqedg * 3 units galvanized drum mounts, secured with container locks, with side forklift pockets center-to-center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Max. drum weight per cable mount 6,000 kg * Without drive and drum brake * Support arm with tension latch for securing the drum shaft * Steel drum shaft 76 mm diameter with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 pieces 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unspooling ----Loading height: * approx. 1,040 mm when loaded ----Paint/Finish: * Chassis, turntable, drawbar, outer frame, and underride guard hot-dip galvanized * Axles painted in a black tone ----Information: * Upgrade to a technical gross weight of 30 t possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery: * Available from calendar week 51 / 2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic lock ----Suspension: * Air suspension with lift and lowering system as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as an info tool, with pressure sensors for displaying total axle load * 15-pin power connection * LED lighting system 12/24V * Removable LED beacon at the rear left ----General Equipment: * Side underride protection * Landing legs at the front and mechanical swing supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier under the chassis, right side ----Low-Loader Platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white) on the fifth wheel platform, can be folded down and removed * Rear wall inserted, 150 mm high * Rear slope on the fifth wheel platform to low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, low-bed platform with 60 mm wooden planks * Checker plate over the axles ----Widening Options: * 8 x mechanical folding wideners to 3 m overall width, but not on rear slope (widening planks included, stored on the fifth wheel platform) * Mechanically adjustable warning sign kits at front and rear ----Load Securing (Lashing Package): Bedpoy Ngz Hjfx Apqodg * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t pivoting and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the rear in the excavator boom trough * 2 x container locks directly after the gooseneck on the low-bed platform ----Excavator Boom Trough: * Continuous trough from end of last fixed axle over steering axle to end cross member, with inner reinforcement profile; approx. L = 2,450 x W = 770 x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for potential future customer retrofitting of hydraulic ramp shifting * The outer board on the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp and approach slope * Rubber on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) ----Loading Dimensions: * Load area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, landing legs, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle * Sample images ----Delivery Time: * o

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.560 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction assist for shunting purposes on first axle, operated via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle controlled from the cab for manoeuvring purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering device as well as RtR valve ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector Bdjdpfsykx Nkjx Apqeg * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with direction indicator function * Tyre pressure monitoring system with read-out option in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Landing legs at front and swing-down supports at rear on chassis * Straight steel mudguards * Spare wheel carrier in front of the front-wall traverse (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as carrier for connection lines from truck to semitrailer ----Low Loader Deck: * 2nd king pin position * Saddle platform with front corners chamfered at 45° and front-mounted tool box made of galvanised, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminium drop sides, hinged and removable, on the sides of the saddle platform (in RAL colour of choice) * 150 mm high rear drop-in board * Rear slope on saddle platform to low-bed, approx. 700 mm long, with chequer plate covering and a perforated strip at the end for hanging aluminium access ramps * Saddle platform with 50 mm clamped timber flooring and low-bed deck with 60 mm clamped timber flooring * Chequer plate over the axles * 9 mechanical folding extensions to 3 m overall width, but not in the rear slope area (extension planks included with closed storage compartment mounted transversely under the loading bed) * Preparation for 3 insertion shafts under the saddle platform for storage of optional aluminium ramps or timber planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, bent 45°, with hole pattern for lashing equipment (2 t lashing capacity per point at min. 480 mm spacing) * 3 x 13.4 t recessed lashing rings on each side of the floor (1 on saddle platform, 1 on longitudinal beams after cranking, 1 above central axle next to longitudinal beam) Low-bed Deck: * 3 x 13.4 t lashing rings on each side on the outer frame (1 at start of saddle platform crank, 1 at start of access slope, 1 at end of access slope) * 2 x 10 t lashing rings on each side (1 between front wheel recess and first axle, and 1 between second and third axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator Arm Storage: * Extended excavator arm storage from end of last rigid axle over steering axle up to end cross member, continuous, with internal reinforcement profile, approx. W = 770 mm x D rear

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering device as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool, equipped with pressure sensors for total axle load display * 15-pin power connector * LED lighting system, 12 / 24V * Removable LED beacon on the rear left ----General Attachments: * Side underrun protection * Landing gear at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Platform: * Fifth-wheel platform with 45° chamfered front corners, and front tool box made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, mounted on the sides of the fifth-wheel platform * Rear board, 150 mm high, slotted in * Sloped rear section on the fifth-wheel platform to the low-bed, approx. 700 mm long * Fifth-wheel platform with 50 mm wooden floorboards and low-bed platform with 60 mm wooden floorboards * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters, but not in the rear slope (extension boards available with storage on the fifth-wheel platform) * Mechanically adjustable warning boards front and rear ----Load Securing (Lashing Package): * On the fifth-wheel platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side within the outer frame * On the low-bed platform, on each side 2 x 13.4 t lashing rings, plus 4 x 10 t lashing rings, swiveling and lowerable, integrated into the outer frame * On each side, 2 x 6.4 t lashing eyes, plus one lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from the end of the last rigid axle over the steering axle to the end beam, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for possible future retrofit of hydraulic ramp shifting system * The outer board of the ramp is made of 50 mm hardwood * Ladder strips on the outer frame of the ramp and on the run-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to 120 l/min) ----Load Dimensions: * Loading area of the fifth-wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm run-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) Bodpol Tnvgofx Apqjdg ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with th

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier underneath the chassis at the right side ----Low-loader platform: * Fifth wheel platform with front corners chamfered at 45° and front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium sideboards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board 150 mm high, slotted in * Rear slope on the fifth wheel platform leading to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Checker plate above axles ----Width Extensions: * 8 x mechanical fold-out extensions for up to 3 meters total width, not on the rear slope (boards for extensions are present and stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and lowerable, sunk into the outer frame * Per side 2 x 6.4 t lashing eyes and 1 lashing ring at the rear in the excavator stick holder * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Holder: * Excavator stick holder running continuously from end of last fixed axle across steering axle to rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for subsequent customer-side retrofit of hydraulic ramp shifting * The outer plank on the ramp made of 50 mm hardwood * Climbing strips on the outer main frame of the ramp and in the approach slope * Rubber on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output from truck between 40 l/min and up to 120 l/min) ----Loading dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale * Sample photos may show equipment not included with the listed vehicl Bdodpfsy Ngzysx Apqeg

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 17.650 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.230 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TP 30.0 with 3 cable drums supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal – without necessary truck-side installation * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Attachments: * Aluminium air reservoir * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: Bdedpfx Apox Nlkaoqjg * Zurr-fix exterior frame, 45° angled, with perforations for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – delivery includes 12 pcs 3,000 kg lashing rings per side * 5 pockets per side for pipe staking 100 x 50 mm in the outer frame – stanchions not included in delivery * 30 mm phenolic plywood floor ----Cable Drum Supports: * 3 galvanized cable drum supports, secured via container locks, with lateral forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Max. drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotatable ends * 2 stop rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-side securing of the drum against turning and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted black

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Fittings: * Side underrun protection * Landing gear at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the right side under the chassis ----Lowbed Platform: * Saddle platform with front corners beveled at 45° and front toolbox made of galvanized sheet steel, dimensions W = 2,480 x H = 500 x L = 665 mm with folding lid * Sideboards on the saddle platform, 400 mm aluminum, foldable and removable (RAL 9010 pure white) * Rear wall -150 mm- plug-in type * Rear slope on the saddle platform to lowbed approx. 700 mm long * Saddle platform with 50 mm hardwood floorboards and lowbed platform with 60 mm floorboards * Treadplate over the axles ----Widenings: * 8 x mechanical folding extensions for total width up to 3 m, not included in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning board sets at the front and rear ----Load Securing (Securing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, and 3 x 5 t lashing rods per side in the outer frame * On the lowbed platform, 2 x 13.4 t lashing rings each side and 4 x 10 t lashing rings, tiltable and lowerable, recessed into the outer frame * 2 x 6.4 t lashing eyes each side along with 1 lashing ring at the rear in the excavator stick tray * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Stick Tray: * Continuous excavator stick tray from the end of the last rigid axle over the steering axle to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece, hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for future customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the external frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from 40 ltr. up to 120 ltr./min) ----Loading Dimensions: * Cargo area of saddle platform: approx. 3,935 x 2,480 mm * Lowbed cargo area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air reservoirs painted in a shade of black * Vehicle is hot-dip galvanized Bsdjpk D I Aepfx Apqodg ----Information: * Brand new vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include equipment not part of the offered vehicle ----Delivery Time: * Available from week 38/2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.560 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for yard shunting on the first axle activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Trailing axle locking for maneuvering, activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function, including RtR valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with in-cab display via EBS signal (without truck-side installation) ----General fittings: * Side underrun protection Bdodpfeykx Nqsx Apqjg * Landing gear at front and swing-down support legs at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall traverse (without spare wheel) * Mechanically adjustable warning panels front and rear * Swivel arm for connection lines from truck to semitrailer ----Lowloader platform: * 2nd king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides in RAL color of choice, foldable and removable, installed on the sides of the saddle platform * Rear wall plug-in panel 150 mm high * Rear bevel on stadium platform to low bed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminum approach ramps * Saddle platform with 50 mm thick clamped wooden planks; low bed platform with 60 mm thick clamped wooden planks * Checker plate over the axles * 9 x manual fold-out widening boards up to 3 m total width (not on the rear bevel); widening planks available, with closed storage compartment transverse to the driving direction below the loading area * Provision for 3 compartments under the saddle platform for storing either aluminum approach ramps or wooden planks for wheel well cover * Provision for container locks on the gooseneck ----Load securing (LaSi package): Saddle platform: * Perforated outer frame bent at 45° with hole pattern for load securing devices (2 t lashing capacity per lashing point at a minimum interval of 480 mm) * 3 x 13.4 t recessed lashing rings on each side (1 x on the saddle platform, 1 x on the longitudinal members after the drop, and 1 x above the middle axle next to the longitudinal member) Low bed platform: * 3 x 13.4 t lashing rings on each side mounted on the outer frame (1 x at the beginning of the saddle platform drop, 1 x at the beginning of the ramp, 1 x at the end of the ramp) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed onto the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm trough: * Extended excavator arm trough continuously running from the end of the last rigid axle over the steering axle to the end cross-member, with internal reinforcement profile approx. W = 770

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 17.650 κιλ, συνολικό βάρος: 24.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.230 χιλ., πλάτος χώρου φόρτωσης: 2.480 χιλ., Έτος κατασκευής: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: Bsdex Nlkgspfx Apqjdg * 17.5" air suspension with lifting and lowering device ----Drawbar: * Drawbar 1,800 mm length with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in truck dashboard via EBS signal – no truck-side installation required * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General equipment: * Aluminium air tank * Lateral stainless-steel toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled, with holed pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at a distance of 480 mm * Installation possible for 3,000 kg drop-forged lashing rings at spacing of approx. 600 mm – delivery includes 12 x 3,000 kg lashing rings per side * 5 pockets per side for stanchions 100 x 50 mm in the outer frame – stanchions are not included in delivery * 30 mm phenolic plywood floor ----Cable drum supports: * 3 galvanized cable drum supports, secured via container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Max drum diameter 2,600 mm and max drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross brace * Permitted drum weight per cradle: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum spindle * Steel drum spindle, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading height: * Approx. 1,040 mm (laden) ----Paintwork: * Chassis, turntable, drawbar, outer frame, rear underrun protection hot-dip galvanized * Axles painted in black tone ----Info: * Technical GVW up to 30 t possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 51 / 2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.940 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.460 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm eye and height adjustment via draw spring & turnbuckle Bdsdpfx Apel Th Nnsqeg ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED rear lights 12 / 24 V * Rear rotating beacon (removable) * 15-pin power connector ----General attachments: * Side underrun protection * Swing-out supports at the rear chassis frame * Mechanically adjustable warning boards front and rear * Stainless steel closed plastic mudguards at the front and straight galvanized steel plate skirts at the rear, each with splash guards * Tool box made of galvanized sheet steel - black powder coated - approx. 650 x 300 x 600 mm * Locking lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load securing (La-Si package consisting of): * 2 lashing rings (6.4 t) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * In the corners 13.4 t, otherwise 10 t. ----Widening: * 6 pairs of mechanical fold-out outriggers for 3 m total width (not at the rear slope), * Widening floor boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic sideways ramp adjustment ----Loading area: * Above the turntable: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm height * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.390 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction assist for shunting purposes, activated on the first axle via EBS (without truck-side installation) * Rear axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket on the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) ----General Mounted Components: * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as a carrier for connection lines from truck to semi-trailer ----Low Loader Deck: * 2nd king pin position * Fifth-wheel platform with 45° chamfered front corners and a toolbox at the front made of galvanized, powder-coated steel sheet, B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high, folding and removable aluminium side boards on the fifth-wheel platform (in RAL custom color) * Rear wall inserted at a height of 150 mm * Rear bevel on the fifth-wheel platform to the low bed, approx. 700 mm long with checker plate covering, as well as perforated strip at the end for attaching aluminium loading ramps * Fifth-wheel platform with 50 mm clamped wooden planks, and low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, but not on the rear bevel (extension planks present with closed storage box transversely mounted under the loading area) * 3 storage recesses under the fifth-wheel platform for storing either aluminium loading ramps or wooden planks for wheel recess covers ----Load Securing (LaSi Package): Fifth-wheel platform: * Perforated outer frame, 45° bent, with hole pattern for lashing means (2 t lashing force per point at a distance of min. 480 mm) * 3 x 13.4 t recessed lashing rings in the floor on each side (1 on the fifth-wheel platform, 1 on the longitudinal beams after the neck, 1 above the middle axle next to the longitudinal beam) Low-bed platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 at the beginning of the neck, 1 at the start of the ramp slope, 1 at the end of the ramp slope) * 2 x 10 t lashing rings each side (1 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frames of the wheel recesses (2 in the front, 1 in the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, from the end of the last fixed axle over the steering axle to the rear cross member, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 / Depth front 170 mm * 2 x 6.4 t lash Bdodpfx Ajtpta Dspqog

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 10.870 κιλ, συνολικό βάρος: 14.400 κιλ, διάταξη αξόνων: 2 άξονες, πρώτη ταξινόμηση: 06/2025, μήκος χώρου φόρτωσης: 5.000 χιλ., πλάτος χώρου φόρτωσης: 2.420 χιλ., ύψος χώρου φόρτωσης: 500 χιλ., Έτος κατασκευής: 2023, Εξοπλισμός: ABS, KA-TA-R 14.4: ----Braking System: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem balancing unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrical System / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical folding support legs at rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted front right side of chassis * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks positioned at the central locking latches and 2 on the front wall ----Chassis: * High-tensile fine-grained steel chassis ----Tipping Platform: * Steel pallet 3-way tipper body, continuous side walls top with interior pipe reinforcement - without central stanchions, drop-down with sideboard spring lifters * Rear corner posts bolted * Combination steel swing doors at rear, 2-wing, asymmetrically split, can be swivelled and locked to 270° (not fold-down), with additional pendulum frame for automatic tailgate opening when tipping; lockable via galvanized rotary bolt at the rear and central locking; deactivation function for the automatic tailgate when reversing with open swing doors * 4 mm fine-grain steel floor plate * Mounting rail at rear for drive-on ramps ----Load Securing: * Each corner fitted with 1 x 5 t lashing point and 4 x 3 t lashing rings integrated into the outer frame on each side ----Ramps: * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis for the ramps ----Tyres: * Tyres 285/70 R19.5 ----Paintwork: Bodpfx Aol Th Htepqodg * Chassis, drawbar, underrun protection, rear stanchions, rear folding supports hot-dip galvanized * Axles, springs, air tank and landing gear painted in black shade * Boarding walls painted RAL 9010 pure white * Additional color options for side walls in RAL shades available at extra cost ----Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (not in operation) * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 10.870 κιλ, συνολικό βάρος: 14.400 κιλ, διάταξη αξόνων: 2 άξονες, πρώτη ταξινόμηση: 06/2025, μήκος χώρου φόρτωσης: 5.000 χιλ., πλάτος χώρου φόρτωσης: 2.420 χιλ., ύψος χώρου φόρτωσης: 500 χιλ., Έτος κατασκευής: 2023, Εξοπλισμός: ABS, KA-TA-R 14.4: ----Brakes: Bdodpfxjl Th Duo Apqsg * Wabco ABS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the front right side of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks at each central locking housing and 2 pieces at the front wall ----Chassis: * Chassis made of fine-grain steel ----Tipper Body: * Steel pallet-side three-way tipper body, continuous side walls on top with internal tube reinforcement – without central stakes, drop-down with side board spring lifts * Rear posts bolted * Combo steel wing doors at the rear, 2-leaf asymmetrically split – can be swiveled and locked at 270° – not drop-down – with additional swing frame for automatic tailgate opening during tipping, locking via galvanized turn-bar lock at the rear and central locking, deactivation function for automatic tailgate during rear tipping with open wing door * 4 mm floor plate made of fine-grain steel * Rear track for loading ramps ----Load Securing: * One 5 t lashing point in each corner, plus four 3 t lashing rings per side recessed in the outer frame ----Ramps: * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred & tracked vehicles * Lockable storage compartment for ramps, recessed under the loading surface at the rear of chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear post, rear folding supports galvanized * Axles, springs, air tank and landing gear painted in black tone * Sideboard painted in RAL 9010 pure white * Side walls available in RAL custom colors at extra charge ----Info: * Reinforced superstructure with load securing certificate * Vehicle has day registration (not been in use) * Errors and prior sale excepted ----Delivery time: Immediately available ex Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 16.500 κιλ, συνολικό βάρος: 21.000 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 4.995 χιλ., πλάτος χώρου φόρτωσης: 2.380 χιλ., ύψος χώρου φόρτωσης: 1.000 χιλ., Έτος κατασκευής: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up assist for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and forced raising of the lift axle via an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping (deactivatable via control unit in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping process ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights, 12 / 24 V, with galvanized protective box ----Drawbar / Flange tow eye: * Drawbar with repositionable K80 ball coupling mm ----Coupling height: * Coupling height approx. 440 - 550 mm loaded, with elevated tower for connection lines ----General attachments: * Support winch front Bodpfx Aoy Tr Hispqodg * Bolted steel underride guard * Plastic quarter fenders in front of the first and behind the last axle * Removable protective grille for the rear lights (not permitted under road traffic regulations and must be removed before driving on public roads) ----Chassis: * High-tensile steel chassis ----Tipping body: * Steel 3-way tipper body (fixed front wall, continuous side walls without central posts, right side wall swingable via central locking and foldable with drop-side spring lifter; left side wall foldable with drop-side hydr. system) * Tailgate swingable with automatic hook locking * 5 mm steel floor made of HARDOX-450 or equivalent steel ----Load securing: * On each side, 4 x 3 t UVV lashing rings integrated in the outer frame ----Painting: * Axles, air tanks, support winch, and flange towing eye painted in black tone * Tipping body painted in a preferred RAL color of your choice (no special or metallic paint), changeable up to approx. 6 weeks prior to completion * Chassis, rear light protective grille, hot-dip galvanized ----Information: * Sample images ----Delivery time: * The vehicle is still under construction and will be completed in week 44 / 2026, subject to uninterrupted and consistent production

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 16.500 κιλ, συνολικό βάρος: 21.000 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 4.995 χιλ., πλάτος χώρου φόρτωσης: 2.380 χιλ., ύψος χώρου φόρτωσης: 1.000 χιλ., Έτος κατασκευής: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Traction assist system for maneuvering purposes on the first axle (actuated via EBS) * 1st axle as a lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the towing vehicle * Automatic lowering of the air suspension during tipping (can be deactivated via a control unit in the cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operations ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * LED rear lights 12 / 24 V with galvanized protective housing ----Drawbar / Flange Eye: * Drawbar with K80 ball coupling, position adjustable, mm ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General Attachments: * Front landing gear Bdedpfx Ajy Tr Hcepqsg * Bolted steel underrun protection * Plastic quarter mudguards positioned before the first and after the last axle * Removable protective grilles for rear lights (not permissible under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis constructed from fine-grain steel ----Tipping Body: * Steel three-way tipper body (fixed front wall, continuous side walls without central stanchions, right-hand side wall swinging with central locking system and drop-down function with board wall spring assist) * Left-hand side wall drop-down with board wall hydromatics * Tailgate swinging via automatic hook locking system * 5mm steel floor made of HARDOX-450 or equivalent material ----Load Securing: * 4 x 3-ton UVV lashing rings recessed into the external frame on each side ----Paintwork: * Axles, air tanks, front landing gear, and flange eye painted in black * Tipper body painted in RAL colour of choice (excluding special or metallic finishes, adjustable up to approx. 6 weeks before completion) * Chassis, rear light protective grilles, and underrun protection hot-dip galvanized ----Info: * Sample images ----Delivery Time: * The vehicle is still in production and, barring any disruptions, will be ready in calendar week 44 / 2026