Ρυμουλκούμενο με πλατφόρμα εργασίας

MÜLLER-MITTELTAL 5 achs Tieflader, Nachlauflenkachse, MA liftbar

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.900 κιλ, συνολικό βάρος: 50.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (with lifted axle, ride height +30 mm) * Last axle force-steered (locking of the steered trailing axle from the cab possible for shunting purposes without truck-side installation, and additionally via a switch on the trailer); the lock must be deactivated before entering public roads * Forced raise and lower for the lift axle for maneuvering (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering device with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon to rear ----General Attachments: * Mechanical warning sign kit for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, located left side * Front axle plastic mudguards, rear axle galvanized steel mudflaps ----Low Loader Deck: * Front platform section with 45° corners and 3 storage compartments with lockable hinged lids (lids opening to the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm incl. 500 mm extended offset step to the front * Rubber covering on the folding frame, approach ramp, and running surface of the low loader platform * Between the longitudinal beams in front of the excavator stick rest: bamboo wood ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes at the front corners * On each side in the front and rear corners: 2 x 13.4 t UVV lashing points * On each side: 5 x 10 t UVV lashing rings (swiveling, lowerable, loadable in all directions) * On each side: 4 stake pockets each with simultaneous 2 t lashing capability * 1 x 16 t UVV lashing point on the rear cross member ----Widening: * Extendable and foldable extension arms for 3 m total width (plank holder under chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from the last axle to the end cross member approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on the side of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and deployable tip section approx. 4,650 x 720 mm, incl. load holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump capacities in the truck exceeding 40 ltr./min up to max. 140 ltr./min) ----Load Height: * Loaded, 890 mm +/- 20 mm (adjustable through air suspension) ----Platform Dimensions: * Over the turntable: 2,600 + 390 x 2,520 mm * Lowbed loading area: 6,280 + 500 x 2,520 mm, including 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and loading ramps hot-dip galvanized * Drawbar fork, axles, hydraulic axle supports, and air tanks painted in black tone ----Info: * New vehicle with manufacturer's warranty * Subject to prior sale and errors Cgodpol Tihuofx Acvsp ----Availability: Available from CW