Ημιρυμουλκούμενο χαμηλής φόρτωσηςMÜLLER-MITTELTAL
3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi
Ημιρυμουλκούμενο χαμηλής φόρτωσης
MÜLLER-MITTELTAL
3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi
σταθερή τιμή συν ΦΠΑ
72.750 €
(86.572 € μικτό)
Έτος κατασκευής
2026
Κατάσταση
Καινούριο
Τοποθεσία
Egestorf 

Εμφάνιση εικόνων
Εμφάνιση χάρτη
Βασικά δεδομένα
- Ονομασία:
- Ημιρυμουλκούμενο χαμηλής φόρτωσης
- Κατασκευαστής:
- MÜLLER-MITTELTAL
- Έτος κατασκευής:
- 2026
- Κατάσταση:
- καινούργιο
Τιμή & Τοποθεσία
σταθερή τιμή συν ΦΠΑ
72.750 €
(86.572 € μικτό)
- Τοποθεσία πωλητή:
- Eichenstich 12, 21272 Egestorf, Γερμανία

Καλέστε
Τεχνικές λεπτομέρειες
- Μέγιστο βάρος φόρτωσης:
- 38.290 κιλ
- Συνολικό βάρος:
- 48.000 κιλ
- Διάταξη αξόνων:
- 3 άξονες
- Μήκος χώρου φόρτωσης:
- 8.500 χιλ.
- Πλάτος χώρου φόρτωσης:
- 2.520 χιλ.
Λεπτομέρειες προσφοράς
- Αναγνωριστικό αγγελίας:
- A218-62-068
- Αριθμός αναφοράς:
- 6335
- Ενημέρωση:
- τελευταία στις 06.05.2026
Περιγραφή
* TS 3 Profile 30.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
Credpfx Ajy Ngzyenpjb
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Last axle self-steering with electro-pneumatic steering lock
----Suspension:
* Air suspension with lifting and lowering function and RtR valve
----Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard operating box mounted on the trailer as an infotool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon at rear left
----General attachments:
* Side underrun protection
* Landing gear at front and mechanical swing-down supports at rear of chassis
* Straight steel mudguards
* Spare wheel holder mounted under chassis, right side
----Low-loader platform:
* Saddle platform with 45° chamfered front corners and front-mounted toolbox made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid
* Side boards on the saddle platform, 400 mm high, made of aluminum (RAL 9010 pure white), foldable and removable
* Rear wall, 150 mm high, slot-in type
* Rear slope on the saddle platform to the low-bed area, approx. 700 mm long
* Saddle platform with 50 mm thick wooden planks; low-bed platform with 60 mm thick wooden planks
* Checker plate over the axles
----Extensions:
* 8 x mechanical fold-out extensions for overall width up to 3 metres, but not on the rear slope (extension boards supplied with storage on the saddle platform)
* Mechanically adjustable warning plates front and rear
----Load securing (Lasi package):
* On the saddle platform: 2 x 6.3 t lashing points per side and 3 x 5 t lashing stakes per side in the outer frame
* On the low-bed platform sides: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and lowerable, recessed in the outer frame
* 2 x 6.4 t lashing eyes per side and 1 lashing point at rear in the excavator arm recess
* 2 x container locks directly after the gooseneck on the low-bed platform
----Excavator arm recess:
* Excavator arm recess, continuous from end of last fixed axle over steering axle to rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm
----Ramps:
* Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically laterally adjustable)
* 4-way control block for future customer retrofitting of hydraulic ramp shifting
* The outer board of the ramp is made from 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the approach slope
* Rubber on ramp and approach slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 to 120 l/min)
----Loading dimensions:
* Load area of saddle platform: approx. 3,935 x 2,480 mm
* Low-bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach slope)
----Coupling height:
* Approx. 1,220 mm (suitable for 2- and 3-axle tractor units)
----Paintwork:
* Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized
* Axles, landing gear, air tanks painted black
* Vehicle is hot-dip galvanized
----Info:
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Sample images may show equipment not included with the offered vehicle
* Sample images
----Delivery time:
* on request
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
Credpfx Ajy Ngzyenpjb
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Last axle self-steering with electro-pneumatic steering lock
----Suspension:
* Air suspension with lifting and lowering function and RtR valve
----Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard operating box mounted on the trailer as an infotool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon at rear left
----General attachments:
* Side underrun protection
* Landing gear at front and mechanical swing-down supports at rear of chassis
* Straight steel mudguards
* Spare wheel holder mounted under chassis, right side
----Low-loader platform:
* Saddle platform with 45° chamfered front corners and front-mounted toolbox made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid
* Side boards on the saddle platform, 400 mm high, made of aluminum (RAL 9010 pure white), foldable and removable
* Rear wall, 150 mm high, slot-in type
* Rear slope on the saddle platform to the low-bed area, approx. 700 mm long
* Saddle platform with 50 mm thick wooden planks; low-bed platform with 60 mm thick wooden planks
* Checker plate over the axles
----Extensions:
* 8 x mechanical fold-out extensions for overall width up to 3 metres, but not on the rear slope (extension boards supplied with storage on the saddle platform)
* Mechanically adjustable warning plates front and rear
----Load securing (Lasi package):
* On the saddle platform: 2 x 6.3 t lashing points per side and 3 x 5 t lashing stakes per side in the outer frame
* On the low-bed platform sides: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, pivoting and lowerable, recessed in the outer frame
* 2 x 6.4 t lashing eyes per side and 1 lashing point at rear in the excavator arm recess
* 2 x container locks directly after the gooseneck on the low-bed platform
----Excavator arm recess:
* Excavator arm recess, continuous from end of last fixed axle over steering axle to rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm
----Ramps:
* Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically laterally adjustable)
* 4-way control block for future customer retrofitting of hydraulic ramp shifting
* The outer board of the ramp is made from 50 mm hardwood
* Climbing strips on the outer frame of the ramp and on the approach slope
* Rubber on ramp and approach slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 to 120 l/min)
----Loading dimensions:
* Load area of saddle platform: approx. 3,935 x 2,480 mm
* Low-bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach slope)
----Coupling height:
* Approx. 1,220 mm (suitable for 2- and 3-axle tractor units)
----Paintwork:
* Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized
* Axles, landing gear, air tanks painted black
* Vehicle is hot-dip galvanized
----Info:
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Sample images may show equipment not included with the offered vehicle
* Sample images
----Delivery time:
* on request
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένος από: 2001
177 Αγγελίες online
Αποστολή αιτήματος
Τηλέφωνο & Φαξ
+49 40 33... αγγελίες
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Μικρή αγγελία
Egestorf
1.810 km
Ημιρυμουλκούμενο χαμηλής φόρτωσης
MÜLLER-MITTELTAL3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi
MÜLLER-MITTELTAL3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi
Μικρή αγγελία
Neuwied
1.695 km
ημιρυμουλκούμενο με μονωμένο κιβώτιο
KögelKühlauflieger Cool Thermo King
KögelKühlauflieger Cool Thermo King
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα











