Χαμηλός φορτωτής

Faymonville MAX510 / MAX510-Z-2H-ATX-A-6.85-PA

Κατάσταση: καινούργιο, συνολικό βάρος: 47.000 κιλ, διάταξη αξόνων: 2 άξονες, Έτος κατασκευής: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross Weight: 47,000 kg Fifth-Wheel Load: 23,000 kg Axle Load: 24,000 kg Gooseneck Length: 3,750 mm Loaded Saddle Height: 1,200 mm Rear Swing Radius: 2,300 mm Loading Platform Length: 6,850 mm Extendable by: 5,500 mm Loading Height at Maximum Load: 350 mm Chassis Length: 2,600 mm Rear Chassis Loading Height at Max Load approx.: 1,005 mm Suspension Travel: -150/+450 mm Axle Spacing: 1,360 mm Overall Width: 2,540 mm Gross weight dependent on fifth-wheel load. Lowbed: Lowbed with external beams, extendable design "SUPER LOW" design, length approx. 6,850 mm. Lowbed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking system. The supply lines are protected within the extendable beams and automatically adjust to the current lowbed length. 5 pairs of lashing rings, foldable to the outside (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings. Rear Chassis: Rear chassis with closed outer frame, tread plate cover, and continuous excavator trough (approx. 1,250/700 x 505 mm), open at the rear. 2 pairs of lashing rings, foldable to the outside (LC 10,000 daN). 1 pair of lashing rings installed flat in the trough (LC 8,000 daN + 5,300 daN). 2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,785 mm. Gooseneck hydraulically lift/lowerable and detachable. Technical fifth-wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2 and 6 x 4 PENDULUM AXLE: "PENDULUM AXLE", all axles hydro-mechanically force-steered. Hose rupture valve on axle compensation cylinder with automatic reset function. Hydraulic cylinders with shut-off valves and locking pins for securing in raised position. Final coating of axles: 2 layers of 2K paint, single-color in "FAY-Grey-34-0260". Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools included. Hjdjizu Nwopfx Ahvou Braking System: Braking system per EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Electrical System: Electrical system per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-Pin sockets. Connection as per ISO standards: 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Structure: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame, ensured by 2-component (2K) zinc dust primer. High-quality 2K top coat, single-color in RAL shades as desired. Rear part metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Tyres: 245/70 R 17.5 3PMSF tyres, manufacturer at seller's discretion. Load index (146/146F) Preparation for bolt-on container locks for carrying 1x 20' or 1x 40' container on the outer beams. Without container locks. 12" kingpin Galvanized steel front wall, approx. 400 mm high. One spare wheel with holder in front of the bulkhead. 2 wheel chocks with holders on the front wall. Yellow-red air couplings on galvanized connection strip at the front. Steering at front and rear via cable remote control with push buttons, with single-track axle monitoring. (No installation in the tractor unit) Hydraulic connections from gooseneck to lowbed m