Χαμηλός φορτωτής

Humbaur 4-Achs-Tieflader HTD 40K- mit Radmulden

HTD 40K-RM-BM_

Internal dimensions: approx. 9,220 mm x 2,540 mm
Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm
Perm. gross weight: 24,000 kg
Payload: approx. 14,000 kg
Tyres: 235/75R17.5 inch
Loading height: approx. 900 mm
Drawbar length: approx. 1,500 mm
Coupling height: approx. 820-1,000 mm
Ramp angle: approx. 10°
Ramp length: approx. 3,150 mm
Ramp width: approx. 750 mm
Perm. gross weight (special permit): 40,000 kg
Payload (special permit): approx. 30,000 kg
Low-bed length: approx. 6,610 mm
Overall dimensions (LxWxH): 11,200 mm
Gross weight (technical): approx. 44,000 kg
Technical axle load: approx. 11,000 kg
6 pairs of lashing points, 3,000 kg per lashing point
Lashing points on the exterior frame (low-bed)
4 pairs of lashing points, 3,000 kg per lashing point
Lashing/pocket stakes 3 t in the exterior frame (high-bed)
1 pair of lashing points, 3,000 kg per lashing point
Lashing/pocket stakes 3 t in the exterior frame (low-bed)

Suspension
Air suspension unit including lifting and lowering, acting on rear axle aggregate

Braking system
Brake system according to EC regulations with EBS 4S/3M in multivoltage version (12-24V), spring-loaded parking brake including 2 test connections routed to the outside for brake/modulator and bellows pressure

Electrics
LED lighting with flashing function for side marker lights, multivoltage (12-24V)

Turntable
Heavy-duty welded construction with low-maintenance ball race turntable

Drawbar equipment
Cranked drawbar with towing eye Ø 50mm, low-maintenance silent bushings including height adjustment for drawbar

Frame
Heavy-duty welded construction made of high-strength fine-grained steel
Continuous crossmembers for maximum stability
Wheel recesses at the front (top length approx. 2,500 mm, depth approx. 410 mm) and rear (top length approx. 1,470 mm, depth approx. 370 mm); without wheel recess covers;
Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm)
Wheel arch cutouts above the rear wheels with wheelbase 2,010, front corners chamfered,
rear with climbing strips on the drive-on ramp for max. safety during loading and unloading
4 pairs of stake pockets (90x50 mm) in the high-bed side frame
1 pair of stake pockets (90x50 mm) in the low-bed side frame

Floor
50 mm softwood flooring (painted/impregnated)

Ramps
One-piece hot-dip galvanized drive-on ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, directly acting standing spring supports for effortless handling

Finish
Chassis frame hot-dip galvanized in immersion bath

Support
2 folding supports at the rear left and right at the vehicle rear

Equipment
Folding side underrun protection,
front semicircular plastic mudguards, rear straight steel mudguards with anti-spray,
2 wheel chocks with holders; contour marking as per ECE regulation R48

Wheel recess covers front
with 3 pairs of stake pockets, without covering (covers retractable under the longitudinal beams) 975.00888
Hardwood covering for front wheel recess cover

Wheel recess cover rear
with 1 pair of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00897
Hardwood covering for rear wheel recess cover

3 pairs of bolted lashing rings, 6 t
3 m equipment package without slope B=11200
Gsdpsiciutefx Abfjua
Folding outrigger with softwood planks 970.04199-36
LED warning package HTD cranked Aspöck warning panels 4-fold, electrics and beacon
1 pair of storage compartments for wooden planks, 3 m package (2 pieces mount

Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.