Μεταχειρισμένο Müller-Mitteltal 3-Achs Plateau, Luftgefedert, Hydr. Rampen προς πώληση (40.538)

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.500 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.380 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * PT 30 Profil: ----Φρένα: * EBS (ηλεκτρονικό σύστημα πέδησης) * Σύστημα έκτακτης απελευθέρωσης για κυλίνδρους ελατηρίων συγκράτησης * Ταμπούρα φρένων ----Άξονας: * 3 x 11 τόνων άξονες Gigant ----Ανάρτηση: * Αερανάρτηση με σύστημα ανύψωσης και χαμηλώματος καθώς και βαλβίδα RtR ----Ζεύξη: * Ζεύκτης μήκους 1.200 mm με οπή ρυμούλκησης 40 mm και ρύθμιση ύψους μέσω ελατηρίου και τεντωτήρα ----Ηλεκτρικά / Φωτισμός: * Smart-Board ως εργαλείο πληροφόρησης τοποθετημένο στο ρυμουλκούμενο (δείχνει φορτίο άξονα - εμπρός και πίσω ξεχωριστά) * Σύστημα ελέγχου πίεσης ελαστικών με δυνατότητα ένδειξης στο φορτηγό μέσω σήματος EBS, χωρίς εγκατάσταση στην πλευρά του φορτηγού * 15-πολικός σύνδεσμος ρεύματος * Φωτισμός LED 12 / 24 V * Αποσπώμενος φάρος LED στο πίσω μέρος ----Γενικός Εξοπλισμός: * Πλευρική προστασία έναντι σύγκρουσης * Πίσω περιστρεφόμενα υποστηρίγματα στο πλαίσιο του σασί * Μηχανικά ρυθμιζόμενες πινακίδες προειδοποίησης μπροστά και πίσω * Πλαστικά πλαϊνά φτερά σε μορφή ¼ με προστασία από πιτσιλιές * Πίσω, ίσιες, γαλβανισμένες ποδιές με προστασία από πιτσιλιές Dusdetplwispfx Alnou * Εργαλειοθήκη γαλβανισμένης λαμαρίνας, περίπου 650 x 300 x 600 mm, μαύρη με πούδρα, δεξιά * Κουτί στο περιστρεφόμενο πλαίσιο για εξαρτήματα με αναδιπλούμενο καπάκι, 2 σταθερά ενσωματωμένες κλειδαριές κοντέινερ (αμέσως μετά την πλατφόρμα περιστρεφόμενου πλαισίου) * 2 γαλβανισμένα σκαλοπάτια στο περιστρεφόμενο πλαίσιο, αριστερά και δεξιά ----Χαμηλόφορτη επιφάνεια: * Αντιολισθητική επένδυση με ραφές συγκολλημένες από ρομπότ στην ατσάλινη πλάκα της πλατφόρμας περιστρεφόμενου πλαισίου (εξέχει η γραμμή συγκόλλησης) ----Ασφάλιση φορτίου (Πακέτο La-Si περιλαμβάνει): * 2 κρίκοι πρόσδεσης (13,4 τόνων) εμπρός αριστερά & δεξιά στη δοκό πρόσθιου τοιχώματος * Μπροστά & πίσω 1 ζεύγος κρίκων UVV (13,4 τόνων) καθώς και από 3 ζεύγη πλευρικών UVV κρίκων (10 τόνων), περιστρεφόμενοι και πτυσσόμενοι, ανθεκτικοί σε όλα τα φορτία, ενσωματωμένοι στο εξωτερικό πλαίσιο * Σε κάθε πλευρά 3 υποδοχές για ορθοστάτες, με δυνατότητα ταυτόχρονης πρόσδεσης φορτίου 2 τόνων * Κεντρική μπάρα πρόσδεσης Profifix κατά μήκος, για δυνατότητα πρόσδεσης μέχρι LC 3000 daN στον ομαλό τομέα ----Διεύρυνση: * 6 ζεύγη μηχανικών αναδιπλούμενων προεκτάσεων για συνολικό πλάτος 3 μέτρα (όχι όμως στην πίσω κλίση) * Πλάκες διεύρυνσης τοποθετημένες στη μέση της επιφάνειας φόρτωσης ----Ράμπες: * Υδραυλικές, μονοκόμματες ράμπες επιβίβασης περίπου 3.000 x 720 mm * Μηχανικά πλευρικά ρυθμιζόμενες * Τετραπλό χειριστήριο για μελλοντική προσθήκη υδραυλικής μετατόπισης ράμπας ----Θέση απόθεσης βραχίονα εκσκαφέα: * Διαμπερής θέση απόθεσης βραχίονα εκσκαφέα πάνω από τον οπίσθιο άξονα έως το τελικό στοιχείο (συνολικό μήκος περίπου 2.100 mm) * 2 ζεύγη κρίκων πρόσδεσης ισχύος LC 6400 daN μέσα στη θέση απόθεσης βραχίονα, πλευρικά στο διαμήκη πλαίσιο ----Ύψος φόρτωσης: * Φορτωμένο περίπου 910 mm +/- 20 mm αερανάρτηση ----Βαφή: * Σασί, περιστρεφόμενο πλαίσιο, αναπτυσσόμενα στηρίγματα, στιριζόμενα πέλματα και ράμπες επιβίβασης θερμογαλβανισμένα * Άξονες, περιστρεφόμενος δακτύλιος, αεροφυλάκιο, ζεύκτης βαμμένα σε μαύρη απόχρωση ----Πληροφορίες: * Καινούργιο όχημα με εγγύηση κατασκευαστή * Επιφύλαξη λαθών και ενδιάμεσης πώλησης ----Χρόνος παράδοσης: * Άμεσα διαθέσιμο από Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.500 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.380 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * PT 30 Profile: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower facility as well as RTR valve ----Drawbar: * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring and turnbuckle ----Electrics / Lighting: * Smart-Board infotool installed on trailer (for axle load display – front and rear separately) * Tyre pressure monitoring with display capability in the truck via EBS signal without truck-side installation * 15-pin power connector * LED lighting 12 / 24 V * LED beacon (removable) at rear ----General Attachments: * Side underrun protection * Swing-down support legs at rear on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle plastic quarter mudguards with spray protection Dodpfx Alexptn Rsneuu * Rear axle straight galvanized steel skirts with spray protection * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, black powder-coated, mounted right side * Compartment in turntable for accessories with folding lid, 2 fixed container locks directly after the turntable platform * 2 galvanized steps on the left and right of the turntable ----Low-loader platform: * ROBOT-welded anti-slip coating on the steel plate of the turntable platform (protruding weld beads) ----Load Securing (Load Securing Package includes): * 2 lashing eyes (13.4 t) front left & right at front wall support * 1 pair UVV lashing rings (13.4 t) at front & rear, plus 3 pairs UVV lashing rings (10 t) on the sides, swivelling and lowerable, loadable in all directions, integrated into the outer frame * 3 stake pockets on each side with simultaneous 2 t lashing capability * Profifix lashing rail longitudinally centre, in the flat area for lashing up to LC 3000 daN ----Widening: * 6 pairs mechanical folding outriggers for 3 m total width (however, not in the rear slope) * Widening planks stored in the centre of the loading platform ----Ramps: * Hydraulic one-piece ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofit of hydraulic ramp shift ----Dipper Stick Rest: * Dipper stick rest above rear axle, continuous up to the end support (total length approx. 2,100 mm) * 2 pairs lashing eyes LC 6400 daN in the dipper stick rest, on the side in the longitudinal frame ----Loading Height: * Approx. 910 mm +/- 20 mm air-sprung when loaded ----Painting: * Chassis, turntable, folding outriggers, drop-down supports and ramps hot-dip galvanized * Axles, slewing ring, air tanks, drawbar painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.940 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.460 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2025, * T3 Profi 30.0 ----Brake system: * EBS braking system * Emergency release device for spring actuators * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical load equalizer at the rear ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via tension spring & turnbuckle ----Lighting / electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED rear lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General attachments: * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Stainless steel front mudguards (closed design) and straight galvanized steel rear splash guards, both with spray protection * Toolbox made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Hinged cover (hot-dip galvanized) for the toolbox in the bogie platform * Four stake pockets on each side (stakes not included) with simultaneous lashing options ----Load securing (la-si package consists of): * 2 lashing rings (6.4 t) front left & right on the main frame of the bogie platform * 6 pairs of UVV lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame * Load capacity in the corners 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical folding outriggers for 3 m total width (not on the rear slope) * Extension planks stored in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for optional retrofitting of hydraulic side shifting ----Loading platform: * Over turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tyres Dusdpfxjl Th I Ao Alnju ----Unladen weight: * approx. 5,980 kg unladen weight ----Paint finish: * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black ----Information: * Permissible gross weight up to 30,000 kg technically possible * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex works Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 23.940 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.460 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm eye and height adjustment via draw spring & turnbuckle ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED rear lights 12 / 24 V * Rear rotating beacon (removable) * 15-pin power connector ----General attachments: * Side underrun protection * Swing-out supports at the rear chassis frame * Mechanically adjustable warning boards front and rear * Stainless steel closed plastic mudguards at the front and straight galvanized steel plate skirts at the rear, each with splash guards * Tool box made of galvanized sheet steel - black powder coated - approx. 650 x 300 x 600 mm * Locking lid (hot-dip galvanized) for the toolbox on the turntable platform * Four stake pockets on each side (stakes not included) with integrated lashing points ----Load securing (La-Si package consisting of): * 2 lashing rings (6.4 t) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions, recessed into the outer frame * In the corners 13.4 t, otherwise 10 t. ----Widening: * 6 pairs of mechanical fold-out outriggers for 3 m total width (not at the rear slope), * Widening floor boards stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic sideways ramp adjustment ----Loading area: * Above the turntable: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm height * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: Dedpfx Alel Th Nneneuu * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Available immediately ex Egestorf

Κατάσταση: μεταχειρισμένο, κενό βάρος: 6.400 κιλ, μέγιστο βάρος φόρτωσης: 23.600 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2013, μήκος χώρου φόρτωσης: 7.800 χιλ., πλάτος χώρου φόρτωσης: 2.500 χιλ., ύψος χώρου φόρτωσης: 920 χιλ., ανάρτηση: ατσάλι, μέγεθος ελαστικού: 235/75R17.5, χρώμα: κίτρινο, χιλιομετρική ένδειξη: 1.001 χλμ, τύπος μετάδοσης: άλλο, καμπίνα οδηγού: άλλο, Εξοπλισμός: ABS, Τοποθεσία οχήματος: σε μεταφορά / καθ' οδόν, 3 άξονες, περιστρεφόμενη δοκός, φύλλα ανάρτησης, ABS (σύστημα αντιμπλοκαρίσματος), κρίκοι πρόσδεσης, υδραυλικές ράμπες, οπίσθια στήριξη, πλευρική αλουμινένια προστασία, διπλά ελαστικά Κατασκευή: 3-αξονικό χαμηλόσουλο ρυμουλκούμενο με υδραυλικές ράμπες, γαλβανισμένες ράμπες, 3x 10t άξονες! Όλες οι πληροφορίες χωρίς εγγύηση, καθώς το όχημα βρίσκεται σε μεταφορά! Οι πληροφορίες για τα εξαρτήματα χωρίς εγγύηση, επιφυλάσσονται αλλαγές, ενδιάμεση πώληση και λάθη! Duodpfx Aley R Ekienju

Κατάσταση: μεταχειρισμένο, κενό βάρος: 6.500 κιλ, μέγιστο βάρος φόρτωσης: 23.500 κιλ, συνολικό βάρος: 30.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 01/2008, μήκος χώρου φόρτωσης: 8.000 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., ύψος χώρου φόρτωσης: 910 χιλ., ανάρτηση: ατσάλι, μέγεθος ελαστικού: 235/75R17.5, χρώμα: πορτοκαλί, χιλιομετρική ένδειξη: 1.001 χλμ, τύπος μετάδοσης: άλλο, καμπίνα οδηγού: άλλο, Εξοπλισμός: ABS, Τοποθεσία οχήματος: Bovenden, φύλλα ανάρτησης, 3 άξονες, άξονες BPW, περιστρεφόμενο τρέιλερ, ABS (σύστημα αντιμπλοκαρίσματος φρένων), κρίκοι πρόσδεσης, υδραυλικές ράμπες, πίσω στήριξη, πλευρικός αλουμινένιος προφυλακτήρας, διπλά ελαστικά, αποθηκευτικός χώρος. Κατασκευή: Υδραυλικές ράμπες, δυνατότητα διεύρυνσης έως 3μ. Άξονες BPW, ταμπούρα φρένων, κρίκοι πρόσδεσης στις εξωτερικές πλευρές. Duodpfoqpgtmex Alnou Μήκος ράμπας περίπου 4000mm! Οι πληροφορίες για τον εξοπλισμό παρέχονται χωρίς εγγύηση, με κάθε επιφύλαξη για αλλαγές, ενδιάμεση πώληση και πιθανά λάθη!

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 10.800 κιλ, συνολικό βάρος: 14.400 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 6.270 χιλ., πλάτος χώρου φόρτωσης: 2.470 χιλ., Έτος κατασκευής: 2026, * ETÜ-TA-R 14,4: ----Φρένα: * Σύστημα φρένων EBS * Εγκατάσταση έκτακτης απελευθέρωσης για ελατήρια συγκράτησης * Ταμπούρα φρένα ----Άξονες: * 2 x 7 τόνων άξονες Gigant ----Ανάρτηση: * Παραβολικά ελατήρια με αντισταθμιστικό σύστημα ----Ράβδος έλξης / Δακτύλιος πρόσδεσης: * Ρυθμιζόμενη σε ύψος ράβδος έλξης κατά 300 mm * Επέκταση ράβδου έλξης κατά 250 mm έως 2.250 mm ----Ηλεκτρικά / Φωτισμός: * Σύστημα παρακολούθησης πίεσης ελαστικών με δυνατότητα ένδειξης στο φορτηγό μέσω σήματος EBS – χωρίς ανάγκη εγκατάστασης στην πλευρά του φορτηγού * Φις ρεύματος 15 πόλων * Φώτα LED 12 / 24 V * Σύστημα EBS πολυ-τάσεως για οχήματα έλξης με ηλεκτρικά 12 και 24 V ----Γενικά επιμέρους εξαρτήματα: * Ανυψωτικό στήριγμα μπροστά * Εξωτερικές αναδιπλούμενες βάσεις στήριξης πίσω * Πλαστικό κιβώτιο εργαλείων περίπου 858 x 500 x 500 mm μπροστά δεξιά εξωτερικά στη μετώπη * Πλευρική προστασία έναντι πρόσκρουσης * Πλαστικά τεταρτο-φτερά Dodpfx Ajrwc R Rolnjuu ----Επιφάνεια χαμηλοφόρτωτου: * Δάπεδο από ξύλο κωνοφόρου πάχους 50 mm * Μπροστά στη μετώπη προεγκατάσταση για προσθήκη κοντέινερ ασφαλίσεων * Βιδωτή μετώπη ύψους 400 mm από λεία λαμαρίνα * Βιδωτές πίσω κολόνες * Πλαϊνά τοιχώματα με ανύψωση με ελατήριο ----Ασφάλιση φορτίου: * Διάτρητο εξωτερικό πλαίσιο λοξό κατά 45 μοίρες με δύναμη συγκράτησης 2 τόνων ανά 480 mm * Δυνατότητα τοποθέτησης αναδιπλούμενων κρίκων με δύναμη συγκράτησης 3 τόνων ανά 600 mm * Στις γωνίες εμπρός και πίσω από 1 κρίκο συγκράτησης 6,3 τόνων * Στη μετώπη και στο τελικό δοκάρι διάφορες τρύπες για δυνατότητα πρόσδεσης 1,2 τόνων * Ράγα πρόσδεσης Profifix κατά μήκος στον άξονα στο κέντρο για δύναμη συγκράτησης έως LC 3000 daN ----Ράμπες: * Μονοκόμματες υδραυλικές ράμπες γρίλιας περίπου 2.750 x 600 mm (αναδιπλούμενες έως 20 mm) * Υδραυλικός διανομέας ροής στο ρυμουλκούμενο (σε περίπτωση υδραυλικής αντλίας στο φορτηγό με παροχή άνω των 40 λίτρων/λεπτ. έως μέγ. 140 λίτρων/λεπτ.) ----Βαφή: * Πλαίσιο οχήματος, ράβδος έλξης, μετώπη, μηχανικές στηρίξεις και ράμπες ανόδου γαλβανισμένα εν θερμώ * Άξονες, ελατήρια, αεροφυλάκιο αέρα, μπροστινή ανύψωση και δακτύλιος πρόσδεσης βαμμένα με μαύρη απόχρωση * Τα πλαϊνά τοιχώματα βαμμένα σε RAL 9010 λευκό * Βαφή των πλευρικών τοιχωμάτων σε οποιοδήποτε χρώμα RAL με επιπλέον χρέωση ----Πληροφορίες: * Καινούργιο όχημα με εγγύηση κατασκευαστή * Με επιφύλαξη λαθών και ενδιάμεσης πώλησης ----Χρόνος παράδοσης: * Άμεσα διαθέσιμο από Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier underneath the chassis at the right side ----Low-loader platform: * Fifth wheel platform with front corners chamfered at 45° and front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium sideboards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board 150 mm high, slotted in * Rear slope on the fifth wheel platform leading to the low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and low-bed platform with 60 mm wooden planks * Checker plate above axles ----Width Extensions: * 8 x mechanical fold-out extensions for up to 3 meters total width, not on the rear slope (boards for extensions are present and stored on the fifth wheel platform) * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform, 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform, 2 x 13.4 t lashing rings per side, and 4 x 10 t lashing rings, swiveling and lowerable, sunk into the outer frame * Per side 2 x 6.4 t lashing eyes and 1 lashing ring at the rear in the excavator stick holder Dedpfjy Ngzyox Alneuu * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Stick Holder: * Excavator stick holder running continuously from end of last fixed axle across steering axle to rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic drive-on ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for subsequent customer-side retrofit of hydraulic ramp shifting * The outer plank on the ramp made of 50 mm hardwood * Climbing strips on the outer main frame of the ramp and in the approach slope * Rubber on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output from truck between 40 l/min and up to 120 l/min) ----Loading dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm approach slope) ----Coupling height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing legs, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to error and prior sale * Sample photos may show equipment not included with the listed vehicl

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is trailing and steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering device as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool, equipped with pressure sensors for total axle load display * 15-pin power connector * LED lighting system, 12 / 24V * Removable LED beacon on the rear left ----General Attachments: * Side underrun protection Dujdpol Tnvgofx Alnou * Landing gear at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Platform: * Fifth-wheel platform with 45° chamfered front corners, and front tool box made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, mounted on the sides of the fifth-wheel platform * Rear board, 150 mm high, slotted in * Sloped rear section on the fifth-wheel platform to the low-bed, approx. 700 mm long * Fifth-wheel platform with 50 mm wooden floorboards and low-bed platform with 60 mm wooden floorboards * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters, but not in the rear slope (extension boards available with storage on the fifth-wheel platform) * Mechanically adjustable warning boards front and rear ----Load Securing (Lashing Package): * On the fifth-wheel platform, 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing bars on each side within the outer frame * On the low-bed platform, on each side 2 x 13.4 t lashing rings, plus 4 x 10 t lashing rings, swiveling and lowerable, integrated into the outer frame * On each side, 2 x 6.4 t lashing eyes, plus one lashing ring at the rear in the excavator arm recess * 2 x container locks directly after the neck on the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from the end of the last rigid axle over the steering axle to the end beam, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for possible future retrofit of hydraulic ramp shifting system * The outer board of the ramp is made of 50 mm hardwood * Ladder strips on the outer frame of the ramp and on the run-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to 120 l/min) ----Load Dimensions: * Loading area of the fifth-wheel platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm run-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air tanks painted in a black tone * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with th

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 10.800 κιλ, συνολικό βάρος: 14.400 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 6.270 χιλ., πλάτος χώρου φόρτωσης: 2.470 χιλ., Έτος κατασκευής: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Tow Eye: * Height-adjustable drawbar (300 mm adjustment) * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with in-cab display in the truck via EBS signal – truck-side installation not required * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 V and 24 V electrical systems ----General attachments: * Landing leg at the front * Rear external foldable support legs * Plastic tool box approx. 858 x 500 x 500 mm, mounted externally on the front right of the bulkhead * Side underrun guard * Plastic quarter mudguards ----Low loader deck: * 50 mm softwood floor * Fittings in front of the bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of smooth sheet metal * Bolted rear stanchions * Drop sides with spring-assisted lifting arms ----Load securing: Dsdpferwc R Asx Alnouu * Perforated outer frame angled at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t load securing options * Profifix lashing rail positioned centrally along the longitudinal axis for lashing loads up to LC 3000 daN ----Ramps: * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be telescoped together down to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs and ramps hot-dip galvanized * Axles, springs, air tanks, landing leg (front), and flange tow eye painted in black * Side walls painted in RAL 9010 pure white * Custom RAL color for side walls available at additional cost ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images ----Delivery time: * Immediately available from Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic lock ----Suspension: * Air suspension with lift and lowering system as well as RtR-valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as an info tool, with pressure sensors for displaying total axle load * 15-pin power connection * LED lighting system 12/24V * Removable LED beacon at the rear left ----General Equipment: * Side underride protection * Landing legs at the front and mechanical swing supports at the rear of the chassis * Straight steel fenders * Spare wheel carrier under the chassis, right side ----Low-Loader Platform: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high aluminum side boards (RAL 9010 pure white) on the fifth wheel platform, can be folded down and removed * Rear wall inserted, 150 mm high * Rear slope on the fifth wheel platform to low-bed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, low-bed platform with 60 mm wooden planks * Checker plate over the axles ----Widening Options: * 8 x mechanical folding wideners to 3 m overall width, but not on rear slope (widening planks included, stored on the fifth wheel platform) * Mechanically adjustable warning sign kits at front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t pivoting and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the rear in the excavator boom trough * 2 x container locks directly after the gooseneck on the low-bed platform Dusdpfsy Ngz Hsx Alnou ----Excavator Boom Trough: * Continuous trough from end of last fixed axle over steering axle to end cross member, with inner reinforcement profile; approx. L = 2,450 x W = 770 x D = 270 mm ----Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for potential future customer retrofitting of hydraulic ramp shifting * The outer board on the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp and approach slope * Rubber on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump output over 40 l/min up to 120 l/min) ----Loading Dimensions: * Load area of fifth wheel platform: approx. 3,935 x 2,480 mm * Low-bed load area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, landing legs, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may show equipment not included with the offered vehicle * Sample images ----Delivery Time: * o

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 38.290 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 8.500 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * TS 3 Profile 30.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as information tool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Fittings: * Side underrun protection * Landing gear at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier mounted on the right side under the chassis ----Lowbed Platform: * Saddle platform with front corners beveled at 45° and front toolbox made of galvanized sheet steel, dimensions W = 2,480 x H = 500 x L = 665 mm with folding lid Dsdpfspk D I Asx Alneuu * Sideboards on the saddle platform, 400 mm aluminum, foldable and removable (RAL 9010 pure white) * Rear wall -150 mm- plug-in type * Rear slope on the saddle platform to lowbed approx. 700 mm long * Saddle platform with 50 mm hardwood floorboards and lowbed platform with 60 mm floorboards * Treadplate over the axles ----Widenings: * 8 x mechanical folding extensions for total width up to 3 m, not included in the rear slope (extension boards available with storage on the saddle platform) * Mechanically adjustable warning board sets at the front and rear ----Load Securing (Securing Package): * On the saddle platform, 2 x 6.3 t lashing rings each, and 3 x 5 t lashing rods per side in the outer frame * On the lowbed platform, 2 x 13.4 t lashing rings each side and 4 x 10 t lashing rings, tiltable and lowerable, recessed into the outer frame * 2 x 6.4 t lashing eyes each side along with 1 lashing ring at the rear in the excavator stick tray * 2 x container locks directly after the gooseneck on the lowbed platform ----Excavator Stick Tray: * Continuous excavator stick tray from the end of the last rigid axle over the steering axle to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece, hot-dip galvanized hydraulic drive-on ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for future customer-side retrofitting of hydraulic ramp shifting * The outer board of the ramp is made from 50 mm hardwood * Climbing strips on the external frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from 40 ltr. up to 120 ltr./min) ----Loading Dimensions: * Cargo area of saddle platform: approx. 3,935 x 2,480 mm * Lowbed cargo area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, landing gear, air reservoirs painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * Brand new vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may include equipment not part of the offered vehicle ----Delivery Time: * Available from week 38/2026

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 16.000 κιλ, συνολικό βάρος: 21.000 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 5.500 χιλ., πλάτος χώρου φόρτωσης: 2.420 χιλ., ύψος χώρου φόρτωσης: 700 χιλ., Έτος κατασκευής: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer assembly with 100 mm wide parabolic springs ----Drawbar / Towing Eye: * Permanently welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm using the head plate), with elevated gantry for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical support legs at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Hot-dip galvanized two-step access ladder in front of the front wall, left side ----Chassis: * High-grade steel chassis ----Tipper Platform: * Steel pallet 3-way tipper body with M-Strong drop sides (fixed front wall, continuous side walls - without center stanchions - swinging via manual central locking and can be mechanically folded down with drop side spring lifters) * Hydraulic tailgate, 500 mm high, can be used as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t flush and foldable lashing rings * Each side with 4 x 3 t flush and foldable lashing rings ----Ramps: * 1 pair aluminum loading ramps (10 t / pair for axle distance over 2,500 mm), dimensions 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 storage compartments for aluminum loading ramps, integrated from the rear into the chassis * Load securing according to EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs and underride guard hot-dip galvanized Dedpfxer Dpzus Alneuu * Axles, air reservoirs, front landing gear * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 16.000 κιλ, συνολικό βάρος: 21.000 κιλ, διάταξη αξόνων: 2 άξονες, μήκος χώρου φόρτωσης: 5.500 χιλ., πλάτος χώρου φόρτωσης: 2.420 χιλ., ύψος χώρου φόρτωσης: 700 χιλ., Έτος κατασκευής: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: Dujdpfxer Dpz Hs Alnou * Rigidly welded drawbar with low-maintenance ball-and-socket head for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with elevated gallows for connecting lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12/24 V with protective grid * 2 LED work lights at rear, switchable from the towing vehicle without installation on the towing vehicle ----General Attachments: * Support winch at the front * Mechanical drop legs at rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Hot-dip galvanized, two-step access in front of the bulkhead (on the left in the direction of travel) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Steel pallet 3-way tipper body with M-Strong side boards (fixed front wall, continuous side walls – without center stanchions – swinging with manual central locking, as well as mechanically foldable with board spring lifter) * Hydraulic tailgate, 500 mm high as hydraulic chute, 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t lashing ring recessed and foldable in each corner * 4 x 3 t tubular lashing eyes recessed and foldable on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair, with axle spacing over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving shafts for aluminum ramps recessed in the chassis at the rear, load securing according to EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Paintwork: * Body painted in RAL 9010 pure white * Chassis, drawbar, rear drop legs, underrun protection hot-dip galvanized * Axles, air tanks, support winch at the front * K80 coupling painted in a black shade ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 31.630 κιλ, συνολικό βάρος: 40.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.250 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs Duodpfx Alerczm Doneu * Mechanical axle equalisation front and rear * Tyre pressure monitoring with in-cab display via EBS signal (no vehicle-side installation required) * Warning sign packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24V electrics * Removable LED beacon at rear * 24V - 15-pin and additionally 12V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made from powder-coated sheet steel and spare wheel holder in basket design, right side * Front closed individual plastic mudguards * Rear straight steel spray guards, each with mud flap (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm to the front * Turntable platform extended by 520 mm to the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm, low loader platform made of 60 mm softwood * Outer planks of the drive-on ramps made of 50 mm bamboo wood * 4 stake pockets on each side (no stakes included) each with 2 t lashing capability * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform, one pair of 13.4 t lashing rings each at the front and rear on the outer frame, 4 pairs per side of 10 t tiltable and lowerable lashing rings, loadable in all directions and recessed into the outer frame, 2 pairs of 6.4 t lashing rings on the side in the digger arm recess, 8 pairs of galvanised folding outriggers for 3 metre total width (not on rear slope) * Widening boards stored in a side compartment on the left * Digger arm recess over rear axle up to end of drive-on slope, approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanised drive-on ramps, approx. 3,000 x 720 mm * Hydraulic lateral ramp displacement on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height: approx. 860 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drive-on ramps, mechanical folding supports at rear hot-dip galvanised * Axles, springs, air tanks and slewing ring painted in black * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available from Egestorf

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 31.630 κιλ, συνολικό βάρος: 40.000 κιλ, διάταξη αξόνων: 3 άξονες, μήκος χώρου φόρτωσης: 9.250 χιλ., πλάτος χώρου φόρτωσης: 2.520 χιλ., Έτος κατασκευής: 2026, * T 4: * EBS (Electronic Braking System) Duodjl Th Evjpfx Alneu * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalisation front and rear * Tyre pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at rear * 24 V – 15-pin power cable and additional 12 V – 7+4 pin power cable * Extended connection leads for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated steel plate and spare wheel holder in basket design on the right side * Closed plastic single mudguards at front * Straight steel splash guards at rear, each with spray suppression * Side underrun protection * Forward offset increased by 500 mm * Turntable platform front extension by 520 mm with 45° corners and 3 integrated storage compartments incl. lockable lids * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and in the low loader platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm bamboo wood * 4 stake pockets on each side (stakes not included), each with 2 t lashing capacity * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on main frame of turntable platform; on both sides at front and rear, each 1 pair of 13.4 t lashing rings on outer frame; on each side 4 pairs of 10 t lashing rings, swivelling and lowerable, loadable in all directions and recessed into outer frame; 2 pairs of 6.4 t lashing rings in digger boom recess; 8 pairs of galvanised folding wide load supports for 3 m overall width (not fitted in rear slope) * Side extension boards stored left side in a locker * Digger boom recess above rear axle up to end of slope approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic hot-dip galvanised ramps approx. 3,000 x 720 mm * Hydraulic side ramp adjustment via sliding tube on the ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, ramps and mechanical fold-down supports at rear hot-dip galvanised * Axles, springs, air tanks and turntable painted in black tone * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Κατάσταση: μεταχειρισμένο, κενό βάρος: 11.000 κιλ, μέγιστο βάρος φόρτωσης: 39.000 κιλ, συνολικό βάρος: 50.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 06/2015, επόμενος τεχνικός έλεγχος (TÜV): 04/2027, μήκος χώρου φόρτωσης: 9.250 χιλ., πλάτος χώρου φόρτωσης: 2.720 χιλ., ύψος χώρου φόρτωσης: 950 χιλ., ανάρτηση: αέρας, μέγεθος ελαστικού: 235/75R17.5, χρώμα: μπλε, χιλιομετρική ένδειξη: 1.001 χλμ, τύπος μετάδοσης: άλλο, καμπίνα οδηγού: άλλο, Εξοπλισμός: ABS, Τοποθεσία οχήματος: Bovenden, 5 άξονες, περιστρεφόμενος άξονας, αερανάρτηση, τελευταίος άξονας κατευθυνόμενος, ABS (σύστημα αντιμπλοκαρίσματος), κρίκοι πρόσδεσης, 2-μεταβλητές υδραυλικές ράμπες φόρτωσης, στήριξη πίσω, πλευρική αλουμινένια προστασία, διπλά ελαστικά. Υπερκατασκευή: 5-αξονικό χαμηλόσουλο ρυμουλκούμενο με υδραυλικές 2-μεταβλητές ράμπες, 5x 10t Gigant-άξονες, ταμπούρα φρένων, ο τελευταίος άξονας κατευθυνόμενος! Οι πρώτοι 3 άξονες έχουν νέα τακάκια φρένων! Οι πληροφορίες για τα αξεσουάρ είναι χωρίς εγγύηση, αλλαγές, ενδιάμεση πώληση και λάθη επιφυλάσσονται! Duedpsy U N Nwsfx Alnsu

Κατάσταση: μεταχειρισμένο, κενό βάρος: 8.800 κιλ, μέγιστο βάρος φόρτωσης: 31.200 κιλ, συνολικό βάρος: 40.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 04/1996, μήκος χώρου φόρτωσης: 10.000 χιλ., πλάτος χώρου φόρτωσης: 2.510 χιλ., ύψος χώρου φόρτωσης: 1 χιλ., ανάρτηση: ατσάλι, μέγεθος ελαστικού: 235/75R17.5, χρώμα: κόκκινο, χιλιομετρική ένδειξη: 1.001 χλμ, τύπος μετάδοσης: άλλο, καμπίνα οδηγού: άλλο, Τοποθεσία οχήματος: Bovenden, 4 άξονες, περιστρεφόμενος πείρος, φύλλο ελατηρίων, επέκταση έως 3 μ., σημεία πρόσδεσης, 2-μερή αναβατόρια, υδραυλικές ράμπες, πίσω στήριξη, πλευρική προστασία από αλουμίνιο, διπλά ελαστικά, αποθηκευτικό κουτί. Κατασκευή: 4-άξονο χαμηλό συρόμενο τρέιλερ με υδραυλικές 2-μερείς ράμπες. Ύψος φόρτωσης περίπου 900 mm. 4x 10t SAF άξονες, ταμπονοφρένα, ρυμουλκούμενος κρίκος 40 και 50 mm! Μήκος άνω πλατφόρμας περίπου 2.900 mm! Μήκος κάτω πλατφόρμας περίπου 7.100 mm! ΔΕΔΟΜΕΝΑ ΑΞΕΣΟΥΑΡ ΧΩΡΙΣ ΕΓΓΥΗΣΗ, Επιφύλαξη για αλλαγές, ενδιάμεση πώληση και λάθη! Dusdpfxsywvhrj Alnsu

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.560 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction assist for shunting purposes on first axle, operated via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle controlled from the cab for manoeuvring purposes via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering device as well as RtR valve ----Electrics / Lighting: * Smart-Board mounted on trailer as infotool, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with direction indicator function * Tyre pressure monitoring system with read-out option in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Landing legs at front and swing-down supports at rear on chassis * Straight steel mudguards * Spare wheel carrier in front of the front-wall traverse (without spare wheel) * Mechanically adjustable warning sign sets front and rear * Swing arm as carrier for connection lines from truck to semitrailer ----Low Loader Deck: * 2nd king pin position * Saddle platform with front corners chamfered at 45° and front-mounted tool box made of galvanised, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm) with folding lid Dsdpjykx Nksfx Alnsuu * 400 mm high aluminium drop sides, hinged and removable, on the sides of the saddle platform (in RAL colour of choice) * 150 mm high rear drop-in board * Rear slope on saddle platform to low-bed, approx. 700 mm long, with chequer plate covering and a perforated strip at the end for hanging aluminium access ramps * Saddle platform with 50 mm clamped timber flooring and low-bed deck with 60 mm clamped timber flooring * Chequer plate over the axles * 9 mechanical folding extensions to 3 m overall width, but not in the rear slope area (extension planks included with closed storage compartment mounted transversely under the loading bed) * Preparation for 3 insertion shafts under the saddle platform for storage of optional aluminium ramps or timber planks for wheel recess covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated outer frame, bent 45°, with hole pattern for lashing equipment (2 t lashing capacity per point at min. 480 mm spacing) * 3 x 13.4 t recessed lashing rings on each side of the floor (1 on saddle platform, 1 on longitudinal beams after cranking, 1 above central axle next to longitudinal beam) Low-bed Deck: * 3 x 13.4 t lashing rings on each side on the outer frame (1 at start of saddle platform crank, 1 at start of access slope, 1 at end of access slope) * 2 x 10 t lashing rings on each side (1 between front wheel recess and first axle, and 1 between second and third axle) * 3 x 5 t lashing rings on each side, bolted to the outer frame of the wheel recesses (2 at the front wheel recess, 1 at the rear wheel recess) ----Excavator Arm Storage: * Extended excavator arm storage from end of last rigid axle over steering axle up to end cross member, continuous, with internal reinforcement profile, approx. W = 770 mm x D rear

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.560 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for yard shunting on the first axle activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Trailing axle locking for maneuvering, activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function, including RtR valve Dujdpfsykx Nqsx Alnsu ----Electrics / Lighting: * Smart-Board mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with in-cab display via EBS signal (without truck-side installation) ----General fittings: * Side underrun protection * Landing gear at front and swing-down support legs at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall traverse (without spare wheel) * Mechanically adjustable warning panels front and rear * Swivel arm for connection lines from truck to semitrailer ----Lowloader platform: * 2nd king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides in RAL color of choice, foldable and removable, installed on the sides of the saddle platform * Rear wall plug-in panel 150 mm high * Rear bevel on stadium platform to low bed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminum approach ramps * Saddle platform with 50 mm thick clamped wooden planks; low bed platform with 60 mm thick clamped wooden planks * Checker plate over the axles * 9 x manual fold-out widening boards up to 3 m total width (not on the rear bevel); widening planks available, with closed storage compartment transverse to the driving direction below the loading area * Provision for 3 compartments under the saddle platform for storing either aluminum approach ramps or wooden planks for wheel well cover * Provision for container locks on the gooseneck ----Load securing (LaSi package): Saddle platform: * Perforated outer frame bent at 45° with hole pattern for load securing devices (2 t lashing capacity per lashing point at a minimum interval of 480 mm) * 3 x 13.4 t recessed lashing rings on each side (1 x on the saddle platform, 1 x on the longitudinal members after the drop, and 1 x above the middle axle next to the longitudinal member) Low bed platform: * 3 x 13.4 t lashing rings on each side mounted on the outer frame (1 x at the beginning of the saddle platform drop, 1 x at the beginning of the ramp, 1 x at the end of the ramp) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed onto the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm trough: * Extended excavator arm trough continuously running from the end of the last rigid axle over the steering axle to the end cross-member, with internal reinforcement profile approx. W = 770

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 23.900 κιλ, συνολικό βάρος: 31.000 κιλ, διάταξη αξόνων: 2 άξονες, πρώτη ταξινόμηση: 06/2007, Έτος κατασκευής: 2007, Εσωτερικός αριθμός οχήματος: G400178 Γερμανικό όχημα Στην αυλή μας στο Kaufungen - Kassel, Γερμανία, άμεσα διαθέσιμο Περισσότερες πληροφορίες: * Luis Lucena (Γερμανικά, Αγγλικά, Ισπανικά, Γαλλικά) * Viktoria Sologubova (Πολωνικά, Ρώσικα, Ουκρανικά, Αγγλικά) Κενό βάρος: 7.100 kg Συνολικό μήκος: 10.800 mm Μέγιστο επιτρεπτό βάρος: 31.000 kg Επιφυλάξεις για τυχόν σφάλματα Ανταλλάσσουμε ευχαρίστως το μεταχειρισμένο όχημά σας. Δυνατότητα χρηματοδότησης απευθείας στην εταιρεία μας. GOLEC NUTZFAHRZEUGE GMBH Dujdszahg Depfx Alneu Ομιλούμε: Γερμανικά, Αγγλικά, Ισπανικά, Πολωνικά, Ουκρανικά, Ρώσικα, Βουλγαρικά.

Κατάσταση: μεταχειρισμένο, μέγιστο βάρος φόρτωσης: 27.300 κιλ, συνολικό βάρος: 36.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 04/2013, επόμενος τεχνικός έλεγχος (TÜV): 08/2026, μήκος χώρου φόρτωσης: 11.700 χιλ., πλάτος χώρου φόρτωσης: 3.000 χιλ., συνολικό πλάτος: 2.550 χιλ., συνολικό ύψος: 3.700 χιλ., Εξοπλισμός: ABS, * Λαιμός κύκνου με κιβώτια αποθήκευσης * Κατευθυνόμενοι άξονες επερχόμενου τύπου * Υδραυλικές ράμπες φόρτωσης * Επεκτάσιμη χαμηλή βάση ----* Διάσταση ελαστικών: 235/75R17,5 * Τεχνικό μικτό βάρος: 42.000 kg * Ιδία βάρος: 8.700 kg * Συνολικό μήκος: 13.150 mm Duedpeza Rlijfx Alneu * Τεχνικός έλεγχος λήγει: 02.2027 ----Αριθμός οχήματος: 12148----Επιφυλάξεις για σφάλματα και ενδιάμεση πώληση----Διαφημίσεις και διάφορες επιγραφές έχουν αφαιρεθεί ψηφιακά.-----Είμαστε στη διάθεσή σας για όλες τις διαδικασίες που απαιτούνται κατά την αγορά ενός οχήματος. Ενημερώστε μας για τις επιθυμίες και τις προτάσεις σας κι εμείς θα αναλάβουμε τα υπόλοιπα. Με επιπλέον χρέωση, μπορούμε να προσφέρουμε τις παρακάτω υπηρεσίες:----Ανταλλαγή του παλαιού σας οχήματοςΈλεγχος TÜV/Τεχνικού ΕλέγχουΠλήρης διαχείριση εξαγωγήςΔιαμεσολάβηση για χρηματοδότησηΑίτηση για αριθμούς κυκλοφορίας εξαγωγήςΜεταφορά οχημάτωνΤαξινόμηση οχημάτωνΑνάκτηση και μεταφορές οχημάτων----?Η ΟΜΑΔΑ VTS

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.390 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes switched to the first axle via EBS (no installation required on the truck side) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting operated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system as well as Return-to-Ride (RtR) valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) ----General attachments: * Side underrun protection * Landing gears at the front and swinging supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low loader platform: * 2nd kingpin position * Saddle platform with 45° chamfered front corners and toolbox at the front made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding cover * 400 mm high side aluminum drop sides (RAL color of your choice) on the saddle platform, foldable and removable * Rear wall -150 mm- inserted * Rear bevel on the saddle platform to the low bed approx. 700 mm long with checker plate covering and at the end a perforated strip for hooking in aluminum approach ramps * Saddle platform with 50 mm clamped wooden planks, low loader platform with 60 mm clamped wooden planks * Checker plate above the axles * 9 x mechanical folding extensions up to 3 m total width, but not in the rear bevel (extension boards available with closed storage compartment transverse to the driving direction under the loading area) Dodpfx Alsq Euakeneuu * 3 storage shafts under the saddle platform for storing either aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi package): Saddle platform: * Perforated outer frame bent 45° with hole pattern for lashing points (2 t lashing force per lashing point with a minimum distance of 480 mm) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the saddle platform, 1 x on the longitudinal beams after the stepped section, and 1 x above the middle axle next to the longitudinal beam) Low loader platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the stepped section of the saddle platform, 1 x at the start of the ramp slope, 1 x at the end of the ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator arm storage: * Extended excavator arm storage from the end of the last rigid axle over the steering axle up to the end c

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.390 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction assist for shunting purposes, activated on the first axle via EBS (without truck-side installation) * Rear axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket on the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) ----General Mounted Components: Dedpfx Aotpta Djlnsuu * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as a carrier for connection lines from truck to semi-trailer ----Low Loader Deck: * 2nd king pin position * Fifth-wheel platform with 45° chamfered front corners and a toolbox at the front made of galvanized, powder-coated steel sheet, B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high, folding and removable aluminium side boards on the fifth-wheel platform (in RAL custom color) * Rear wall inserted at a height of 150 mm * Rear bevel on the fifth-wheel platform to the low bed, approx. 700 mm long with checker plate covering, as well as perforated strip at the end for attaching aluminium loading ramps * Fifth-wheel platform with 50 mm clamped wooden planks, and low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, but not on the rear bevel (extension planks present with closed storage box transversely mounted under the loading area) * 3 storage recesses under the fifth-wheel platform for storing either aluminium loading ramps or wooden planks for wheel recess covers ----Load Securing (LaSi Package): Fifth-wheel platform: * Perforated outer frame, 45° bent, with hole pattern for lashing means (2 t lashing force per point at a distance of min. 480 mm) * 3 x 13.4 t recessed lashing rings in the floor on each side (1 on the fifth-wheel platform, 1 on the longitudinal beams after the neck, 1 above the middle axle next to the longitudinal beam) Low-bed platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 at the beginning of the neck, 1 at the start of the ramp slope, 1 at the end of the ramp slope) * 2 x 10 t lashing rings each side (1 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frames of the wheel recesses (2 in the front, 1 in the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, from the end of the last fixed axle over the steering axle to the rear cross member, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 / Depth front 170 mm * 2 x 6.4 t lash

Κατάσταση: μεταχειρισμένο, συνολικό βάρος: 47.000 κιλ, διάταξη αξόνων: 3 άξονες, πρώτη ταξινόμηση: 11/2004, επόμενος τεχνικός έλεγχος (TÜV): 08/2026, * Müller Mitteltal TS3 χαμηλόστροφο ημιρυμουλκούμενο * Πρώτη άδεια: 11/2004 * 3 άξονες * Αερανάρτηση * Άξονες Gigant * Υδραυλικές μακριές ράμπες, συρόμενες και αναδιπλούμενες * Δυνατότητα διεύρυνσης από 2,50 μ. έως 3,0 μ. πλάτος χώρου φόρτωσης * Μήκος φόρτωσης: 8,50 μ. με 0,85 μ. ύψος φόρτωσης Duodpfxjw Tgkbs Alneu * Μήκος φόρτωσης στον λαιμό: 3,40 μ. με ύψος φόρτωσης 1,50 μ. * Υποστηρίγματα * Ικανοποιητικό βάρος: 10.260 kg * Τεχνικό μεικτό βάρος: 47.000 kg * TÜV έως: 08/2026 * ΚΤΕΟ έως: 02/2026