Ρυμουλκούμενο με πλατφόρμα εργασίαςMÜLLER-MITTELTAL
T4, Luftfed., hydr. Klapprampe, Baggerstiel.
Ρυμουλκούμενο με πλατφόρμα εργασίας
MÜLLER-MITTELTAL
T4, Luftfed., hydr. Klapprampe, Baggerstiel.
Σταθερή τιμή συν ΦΠΑ
65.500 €
(77.945 € μικτό)
Έτος κατασκευής
2026
Κατάσταση
Καινούριο
Τοποθεσία
Egestorf 

Βασικά δεδομένα
- Ονομασία:
- Ρυμουλκούμενο με πλατφόρμα εργασίας
- Κατασκευαστής:
- MÜLLER-MITTELTAL
- Έτος κατασκευής:
- 2026
- Κατάσταση:
- καινούργιο
Τιμή & Τοποθεσία
Σταθερή τιμή συν ΦΠΑ
65.500 €
(77.945 € μικτό)
- Τοποθεσία:
- Eichenstich 12, 21272 Egestorf, Deutschland

Καλέστε
Τεχνικές λεπτομέρειες
Διαστάσεις και βάρος
Συνολικό βάρος:
40.000 κιλ
Μέγιστο βάρος φόρτωσης:
30.740 κιλ
Άξονες και τροχοί
Διάταξη αξόνων:
> 3 άξονες
Λεπτομέρειες προσφοράς
- Αναγνωριστικό αγγελίας:
- A104-27-675
- Αριθμός αναφοράς:
- 59081
- Ενημέρωση:
- τελευταία στις 03.07.2026
Περιγραφή
* T 4:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 4 x 11 ton Gigant axles
* Air suspension with lift/lower system and RtR valve
* Smard board for load weight determination
* Warning sign packages front & rear
* Reflective contour tape on the sides and rear
* Rotating beacon (removable) at the rear
* LED lighting
Pgsdpfx Aasl Tik Njiet
* Straight drawbar with 50 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated steel sheet and spare wheel holder in basket-type design on the right-hand side
* Closed plastic single mudguards at the front
* Straight steel mud flaps at the rear with spray suppression (spray mist reduction)
* Side underrun protection
* Turntable platform extended by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable
* Chassis made of high-strength fine-grain steel
* Floor above turntable platform made of 50 mm softwood, in low-bed platform made of 60 mm softwood
* Outer planks of ramps made of hardwood
* Four stake pockets (stakes not included) per side, each with 2 ton lashing capability
* Load securing package: 2 lashing eyes, 6.4 ton, at the front left and right on the main frame of the turntable platform
* Two pairs each (front and rear) of 13.4 ton lashing rings on the outer frame, plus four pairs per side (side-mounted) of 10 ton swingable and lowerable lashing rings
* Loadable in all directions and recessed into the outer frame
* 2 pairs of 6.4 ton lashing rings in the excavator stick rest
* 8 pairs of galvanized drop-out brackets for 3 m total width (not at rear slope)
* Widening planks stowed in a side compartment on the left
* Excavator stick rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm
* Mechanical support legs at the rear
* Hydraulic folding ramps with hydraulically deployable tip section, approx. 4,650 x 720 mm, incl. hydraulic side ramp shifting & load holding valve
* Load area above turntable: approx. 2,990 x 2,520 mm
* Rear load area: approx. 6,780 x 2,520 mm
* Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope)
* Flow divider installed
* Chassis, turntable, approach ramps, drop-out brackets, and mechanical support legs hot-dip galvanized
* Axles, drawbar, air reservoirs, and turntable painted in black
* Tires 235/75 R 17.5
* New vehicle without first registration, comes with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf at the A7
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring-actuated cylinders
* Drum brakes
* 4 x 11 ton Gigant axles
* Air suspension with lift/lower system and RtR valve
* Smard board for load weight determination
* Warning sign packages front & rear
* Reflective contour tape on the sides and rear
* Rotating beacon (removable) at the rear
* LED lighting
Pgsdpfx Aasl Tik Njiet
* Straight drawbar with 50 mm towing eye and infinitely adjustable height
* Tool box made of powder-coated steel sheet and spare wheel holder in basket-type design on the right-hand side
* Closed plastic single mudguards at the front
* Straight steel mud flaps at the rear with spray suppression (spray mist reduction)
* Side underrun protection
* Turntable platform extended by 520 mm at the front, with 45° corners and 3 recessed storage compartments incl. lids, lockable
* Chassis made of high-strength fine-grain steel
* Floor above turntable platform made of 50 mm softwood, in low-bed platform made of 60 mm softwood
* Outer planks of ramps made of hardwood
* Four stake pockets (stakes not included) per side, each with 2 ton lashing capability
* Load securing package: 2 lashing eyes, 6.4 ton, at the front left and right on the main frame of the turntable platform
* Two pairs each (front and rear) of 13.4 ton lashing rings on the outer frame, plus four pairs per side (side-mounted) of 10 ton swingable and lowerable lashing rings
* Loadable in all directions and recessed into the outer frame
* 2 pairs of 6.4 ton lashing rings in the excavator stick rest
* 8 pairs of galvanized drop-out brackets for 3 m total width (not at rear slope)
* Widening planks stowed in a side compartment on the left
* Excavator stick rest above the rear axle up to the end of the approach slope approx. 2,100 x 740 x 190 mm
* Mechanical support legs at the rear
* Hydraulic folding ramps with hydraulically deployable tip section, approx. 4,650 x 720 mm, incl. hydraulic side ramp shifting & load holding valve
* Load area above turntable: approx. 2,990 x 2,520 mm
* Rear load area: approx. 6,780 x 2,520 mm
* Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope)
* Flow divider installed
* Chassis, turntable, approach ramps, drop-out brackets, and mechanical support legs hot-dip galvanized
* Axles, drawbar, air reservoirs, and turntable painted in black
* Tires 235/75 R 17.5
* New vehicle without first registration, comes with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf at the A7
Η αγγελία μεταφράστηκε αυτόματα. Ενδέχεται να υπάρχουν σφάλματα μετάφρασης.
Προμηθευτής
Σημείωση: Εγγραφείτε δωρεάν ή συνδεθείτε, για να αποκτήσετε πρόσβαση σε όλες τις πληροφορίες.
Εγγεγραμμένος από: 2001
172 Αγγελίες online
Αποστολή αιτήματος
Τηλέφωνο & Φαξ
+49 40 33... αγγελίες
Αυτές οι αγγελίες μπορεί επίσης να σας ενδιαφέρουν.
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Egestorf
1.810 km
Ρυμουλκούμενο χαμηλού φορτίου
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Kaufungen
1.658 km
Φορτωτής με ελαστικά
MANITOUMHT 10180 Teleskoplader 521 h
MANITOUMHT 10180 Teleskoplader 521 h
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Bree
1.843 km
Standard-SZM
IvecoStralis 500 2 tanks
IvecoStralis 500 2 tanks
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Lübbecke
1.791 km
Ανατρεπόμενο
IVECO260AD500PS 6x4 Blatt/Blatt AHK Retarder
IVECO260AD500PS 6x4 Blatt/Blatt AHK Retarder
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Pragsdorf
1.733 km
Παλαιός τρακτέρ
Deutz-FahrD 55 Neuer Preis!
Deutz-FahrD 55 Neuer Preis!
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Forlì
993 km
ανατρεπόμενο φορτηγό
IvecoTrakker 500
IvecoTrakker 500
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Parma
1.146 km
ημιρυμουλκούμενο χαμηλού δαπέδου για μεταφορά μηχανημάτων κατασκευών
komodocarrellone 3assi rampe ribassato pianale
komodocarrellone 3assi rampe ribassato pianale
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Fürth
1.565 km
Minidumper
ThwaitesDumper Raddumper 3 Tonnen Drehmulde Jcb
ThwaitesDumper Raddumper 3 Tonnen Drehmulde Jcb
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Bad Hönningen
1.707 km
Οικιακό κοντέινερ Κοντέινερ γραφείου
Bürocontainer / Wohncontainer/ Baucontainer Modell Grau
Bürocontainer / Wohncontainer/ Baucontainer Modell Grau
Επιτυχής
Το μήνυμά σας εστάλη.
Μικρή αγγελία
Aidenbach
1.268 km
Σταθερός τηλεσκοπικός φορτωτής
MerloTF35.7-140 - 40 km/h
MerloTF35.7-140 - 40 km/h
Η αγγελία σας διαγράφηκε με επιτυχία
Παρουσιάστηκε σφάλμα





























































































































































































































