Ημιρυμουλκούμενο με πλατφόρμα εργασίας

MÜLLER-MITTELTAL 3-achs mit Radmulden, 2 Ladehöhen, Klapprampen

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.390 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for shunting purposes switched to the first axle via EBS (no installation required on the truck side) * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting operated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system as well as Return-to-Ride (RtR) valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) ----General attachments: * Side underrun protection * Landing gears at the front and swinging supports at the rear of the chassis Isdpsq Euaksfx Aglohu * Straight steel mudguards * Spare wheel holder in front of the front wall cross member (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swivel arm as carrier for connection lines from the truck to the semi-trailer ----Low loader platform: * 2nd kingpin position * Saddle platform with 45° chamfered front corners and toolbox at the front made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding cover * 400 mm high side aluminum drop sides (RAL color of your choice) on the saddle platform, foldable and removable * Rear wall -150 mm- inserted * Rear bevel on the saddle platform to the low bed approx. 700 mm long with checker plate covering and at the end a perforated strip for hooking in aluminum approach ramps * Saddle platform with 50 mm clamped wooden planks, low loader platform with 60 mm clamped wooden planks * Checker plate above the axles * 9 x mechanical folding extensions up to 3 m total width, but not in the rear bevel (extension boards available with closed storage compartment transverse to the driving direction under the loading area) * 3 storage shafts under the saddle platform for storing either aluminum approach ramps or wooden planks for covering wheel recesses ----Load securing (LaSi package): Saddle platform: * Perforated outer frame bent 45° with hole pattern for lashing points (2 t lashing force per lashing point with a minimum distance of 480 mm) * Each side with 3 x 13.4 t lashing rings recessed in the floor (1 x on the saddle platform, 1 x on the longitudinal beams after the stepped section, and 1 x above the middle axle next to the longitudinal beam) Low loader platform: * Each side with 3 x 13.4 t lashing rings on the outer frame (1 x at the start of the stepped section of the saddle platform, 1 x at the start of the ramp slope, 1 x at the end of the ramp slope) * Each side with 2 x 10 t lashing rings (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * Each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator arm storage: * Extended excavator arm storage from the end of the last rigid axle over the steering axle up to the end c

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 37.390 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction assist for shunting purposes, activated on the first axle via EBS (without truck-side installation) * Rear axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering system as well as RtR valve ----Electrics / Lighting: * Smart-Board installed on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket on the rear for overlength lighting * Side marker lights with indicator function * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) ----General Mounted Components: Iedpfstpta Dsx Aglshu * Side underrun protection * Landing legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as a carrier for connection lines from truck to semi-trailer ----Low Loader Deck: * 2nd king pin position * Fifth-wheel platform with 45° chamfered front corners and a toolbox at the front made of galvanized, powder-coated steel sheet, B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high, folding and removable aluminium side boards on the fifth-wheel platform (in RAL custom color) * Rear wall inserted at a height of 150 mm * Rear bevel on the fifth-wheel platform to the low bed, approx. 700 mm long with checker plate covering, as well as perforated strip at the end for attaching aluminium loading ramps * Fifth-wheel platform with 50 mm clamped wooden planks, and low-bed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9 mechanical folding extensions to a total width of 3 m, but not on the rear bevel (extension planks present with closed storage box transversely mounted under the loading area) * 3 storage recesses under the fifth-wheel platform for storing either aluminium loading ramps or wooden planks for wheel recess covers ----Load Securing (LaSi Package): Fifth-wheel platform: * Perforated outer frame, 45° bent, with hole pattern for lashing means (2 t lashing force per point at a distance of min. 480 mm) * 3 x 13.4 t recessed lashing rings in the floor on each side (1 on the fifth-wheel platform, 1 on the longitudinal beams after the neck, 1 above the middle axle next to the longitudinal beam) Low-bed platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 at the beginning of the neck, 1 at the start of the ramp slope, 1 at the end of the ramp slope) * 2 x 10 t lashing rings each side (1 between front wheel recess and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frames of the wheel recesses (2 in the front, 1 in the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest, from the end of the last fixed axle over the steering axle to the rear cross member, continuous with internal reinforcement profile, approx. W = 770 mm x D rear = 270 / Depth front 170 mm * 2 x 6.4 t lash

Κατάσταση: καινούργιο, μέγιστο βάρος φόρτωσης: 36.900 κιλ, συνολικό βάρος: 48.000 κιλ, διάταξη αξόνων: 3 άξονες, Έτος κατασκευής: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes Iedpfxjykx Nqj Aglohu ----Axles: * 3 x 11 t BPW axles * Maneuvering aid for yard shunting on the first axle activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Trailing axle locking for maneuvering, activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function, including RtR valve ----Electrics / Lighting: * Smart-Board mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator activation * Tire pressure monitoring with in-cab display via EBS signal (without truck-side installation) ----General fittings: * Side underrun protection * Landing gear at front and swing-down support legs at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall traverse (without spare wheel) * Mechanically adjustable warning panels front and rear * Swivel arm for connection lines from truck to semitrailer ----Lowloader platform: * 2nd king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm high aluminum drop sides in RAL color of choice, foldable and removable, installed on the sides of the saddle platform * Rear wall plug-in panel 150 mm high * Rear bevel on stadium platform to low bed approx. 700 mm long with checker plate, with a perforated strip at the end for hooking in aluminum approach ramps * Saddle platform with 50 mm thick clamped wooden planks; low bed platform with 60 mm thick clamped wooden planks * Checker plate over the axles * 9 x manual fold-out widening boards up to 3 m total width (not on the rear bevel); widening planks available, with closed storage compartment transverse to the driving direction below the loading area * Provision for 3 compartments under the saddle platform for storing either aluminum approach ramps or wooden planks for wheel well cover * Provision for container locks on the gooseneck ----Load securing (LaSi package): Saddle platform: * Perforated outer frame bent at 45° with hole pattern for load securing devices (2 t lashing capacity per lashing point at a minimum interval of 480 mm) * 3 x 13.4 t recessed lashing rings on each side (1 x on the saddle platform, 1 x on the longitudinal members after the drop, and 1 x above the middle axle next to the longitudinal member) Low bed platform: * 3 x 13.4 t lashing rings on each side mounted on the outer frame (1 x at the beginning of the saddle platform drop, 1 x at the beginning of the ramp, 1 x at the end of the ramp) * 2 x 10 t lashing rings on each side (1 x between the front wheel well and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed onto the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm trough: * Extended excavator arm trough continuously running from the end of the last rigid axle over the steering axle to the end cross-member, with internal reinforcement profile approx. W = 770